Continuous and aligned fiber-reinforced composite with cross-sectional area of 330 mm² (0.51 in.²) is subjected to a longitudinal loadof 49200 N (11100 lbf). Assume Vf=0.3, Vm = 0.7, Ef= 131 GPa and Em = 2.4 GPa.(a) Calculate the fiber-matrix load ratio.(b) Calculate the actual load carried by fiber phase.(c) Calculate the actual load carried by matrix phase.(d) Compute the magnitude of the stress on the fiber phase.(e) Compute the magnitude of the stress on the matrix phase.(f) What strain is expected by the composite?Part 1Calculate the fiber-matrix load ratio.MSave for LaterPart 2What is the load, in N, carried by the matrix and the fibers?(a) What is the matrix load in N?i(b) What is the fiber load in N?iNNAttempts: 0 of 3 used Submit Answer What is the stress, in MPa, carried by the matrix and the fibers?(a) What is the matrix stress in MPa?(b) What is the fiber stress in MPa?iiSave for LaterPart 4iMPaMPaWhat is the strain experienced by the composite?Attempts: 0 of 3 used Submit Answer

“Since you have posted multiple questions with multiple sub parts, we will provide the solution only…

Continuous and aligned fiber-reinforced composite with cross-sectional area of 330 mm² (0.51 in.2) is subjected to a longitudinal load of 49200 N (11100 lbf). Assume V₁ = 0.3, Vm = 0.7, Ef= 131 GPa and Em = 2.4 GPa. (a) Calculate the fiber-matrix load ratio. (b) Calculate the actual load carried by fiber phase. (c) Calculate the actual load carried by matrix phase. (d) Compute the magnitude of the stress on the fiber phase. (e) Compute the magnitude of the stress on the matrix phase. (f) What strain is expected by the composite?

Continuous and aligned fiber-reinforced composite with cross-sectional area of 330 mm² (0.51 in.2) is subjected to a longitudinal load of 49200 N (11100 lbf). Assume V₁ = 0.3, Vm = 0.7, Ef= 131 GPa and Em = 2.4 GPa. (a) Calculate the fiber-matrix load ratio. (b) Calculate the actual load carried by fiber phase. (c) Calculate the actual load carried by matrix phase. (d) Compute the magnitude of the stress on the fiber phase. (e) Compute the magnitude of the stress on the matrix phase. (f) What strain is expected by the composite?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

(B) Composite consists of polyester as a matrix reinforced by glass fiber. If the composite have cross- sectional area is (250 mm') and stress of (50 MPa) is applied in this longitudinal direction. 1-Compute the weight fraction of fibers and matrix. 2-Compute the magnitude of the load carried by each of fiber and matrix phase. Note:- Modulus of Elasticity (GPa) Material Density (g/cm³) Polyester 1.38 3.4 Glass Fiber 2.58 69 Composite 2.1
Calculate the density of a composite made with 35% Kevlar-49 fibers in an epoxy resin (ρ = 1.1 kg/m3, E = 2.5 GPa). For Kevlar-49, Ef = 131 GPa; density = 1440 kg/m3
A composite has 20 vol% fibres with Ef = 150 GPa in a matrix Em = 30 GPa. If subjected to load parallel to the fibre direction, the fibre would fail first when the stress of fibre reaches 22.5 GPa. Note the composite stress is expressed as o̟ = Vf0s, + (1-Vf) omfı. The matrix would fail later at a failure strain of 0.4, where the composite stress is expressed as a, = (1 – V;)ơm- Assume both the matrix and the fibres deform elastically and subsequently undergo brittle fracture. What would be the maximum stress the composite can withstand? 8.1 GPa 4.5 GPa 12 GPa 22.5 GPa 9.6 GPa
A component of a composite rocket motor ease is subject to a state of stress o_x = 10 MPa, o_y = 5 MPa, o_xy = 2.5 MPa. Use the material data for Carbon/Epoxy (AS4-3501-6) in Table 1.3. Using "principal stress design", compute: a. The optimum fiber orientation.
An epoxy (E=2.7GPA) is reinforced with carbon fiber with module of elasticity equal to 260 GPa. Design a composite with a longitudinal elastic modulus of 160 GPa. Select one: a. Vm = 70 vol%, Vf = 30 vol% b. Vm = 40 vol%, Vf = 50 vol% C. Vm = 39 vol%, Vf = 61 vol% d. Vm = 62 vol%, Vf = 38 vol%
Question 2 = 219,48 M//a = 247,3785 Pa 2.1 Consider a polymer reinforced with Spectra 1000 fibers, with a fiber volume ratio of x = 15 %. For a cross sectional area of 130 mm² and a load of 250 kg, calculate the stress in the fibers and in the matrix if the matrix material is polycarbonate. 2.2 Why are fibres capable of supporting a large portion of the tensile load in composite materials?
Example 2 For a unidirectional glass/epoxy lamina, the constituent material properties - 0.3, are as follows: E,= 76 GPa, v=0.2, G = 35 GPa, E = 3.6 GPa, v m m G = 1.4 GPa. Consider the fiber volume fraction of 0.6. m (a) Determine the composite longitudinal modulus, transverse modulus, major Poisson's ratio, and in-plane shear modulus.
A discontinuous fibre reinforced composite consists of 20mm long carbon fibres in a polymer matrix. The volume fraction of the composite is 0.5, interfacial shear strength 5MPa and the critical fibre length 2.5mm. The fibre modulus is 250GPa and strain to failure 1.5%. The matrix modulus is 3.5GPa and failure strain 10%. If the ultimate fibre strength = 3500MPa, calculate the average failure stress in the composite. Answer: 2584
An epoxy (E = 3.25 GPa) is reinforced with 55 vol% E-glass (E = 79 GPa). The fibres are continuous and aligned. Assuming no voids, compute the modulus of elasticity in the longitudinal and transverse (lateral) directions. Select one: a. Longitudinal modulus = 25.1 GPa, Transverse (lateral) modulus = 44.9 GPa b. Longitudinal modulus = 44.9 GPa, Transverse (lateral) modulus = 6.9 GPa c. Longitudinal modulus = 6.9 GPa, Transverse (lateral) modulus = 74.2 GPa d. Longitudinal modulus = 74.2 GPa, Transverse (lateral) modulus = 25.1 GPa
A composite sample of carbon reinforced epoxy has dimensions of 12 in x 12 in x 0.25 in and mass of 1.8 lb. The carbon fibers have a modulus of elasticity of 50(106) lb/in² and a density of 0.069 lb/in³. The epoxy matrix has modulus of elasticity of 0.61(106) lb/in² and a density of 0.042 lb/in³. What is the volume fraction of (a) the carbon fibers and (b) the epoxy matrix in the sample? Assume there are no voids in the sample. What is the predicted value for the modulus of elasticity (c) in the longitudinal direction and (d) the perpendicular to the carbon fibers?
For a glass/epoxy lamina with a 70% fiber volume fraction using the properties in the tables provided below (a) Find the ultimate tensile strength. (b) Find the minimum and critical fiber volume fractions related to (a). (c) Find the compressive strength when the matrix undergoes extension mode and when the matrix undergoes shear mode, which one controls the compressive failure? Property Axial modulus Transverse modulus Axial Poisson's ratio Transverse Poisson's ratio Shear modulus Axial tensile strength Axial compressive strength Transverse tensile strength Transverse compressive strength Shear strength Epoxy Glass Units 3.4 85 GPa 3.4 85 GPa 0.3 0.20 0.3 0.20 1.308 35.42 GPa 72 1550 MPa 102 1550 MPa 72 1550 MPa 102 1550 MPa 34 35 MPa
An aligned and continuous glass fiber-reinforced epoxy composite consisting of 55 vol% glass fibers has a cross-sectional area of 420 mm2. The composite is subjected to a longitudinal load of 61,300 N. Calculate the magnitude of the stress on matrix phase if the elastic moduli of the glass fiber and the epoxy are 165 GPa and 5.7 GPa, respectively.