Consider a 1.2 m*2 m glass window of 6 mmthick having k=0.75 W/mK, which is exposed toenvironment at 20 degrees * C with a convectiveheat transfer coefficient of 1OW / (m ^ 2) * K If theinner surface temperature of the glass is at 5degrees * C. Find the outer surface temperatureand rate of heat leak into the room.

The sloution is given in next step

Consider a 1.2 m*2 m glass window of 6 mm thick having k=0.75 W/mK, which is exposed to environment at 20 degrees * C with a convective heat transfer coefficient of 10W / (m ^ 2) * K If the inner surface temperature of the glass is at 5 degrees * C. Find the outer surface temperature and rate of heat leak into the room.

Consider a 1.2 m2 m glass window of 6 mm thick having k=0.75 W/mK, which is exposed to environment at 20 degrees C with a convective heat transfer coefficient of 10W / (m ^ 2) * K If the inner surface temperature of the glass is at 5 degrees * C. Find the outer surface temperature and rate of heat leak into the room.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

How much heat is lost due to heat convection in a 25 minute period from 50*10ft wall. If the difference between the wall temperature and the air temperature is 54 F and the surface of the wall has a heat transfer ratio of 0.17 BTU/hr? Show detailed solution
A composite wall constructed of 2.5cm of steel (k-60.5 W/m-K) and 5.0 cm of aluminum (k177W/m-K) separates two liquids. The liquid on the steel side has a film coefficient of 15W/m²-K and a temperature of 400degC. The liquid on the steel side has a film coefficient of 30W/m² and a temperature of 100degC. Assume steady state conditions, what is the temperature at the steel-aluminum interface in deg C
A 10 cm outer diameter pipe carrying saturated steam at a temperature of 195C is lagged to 20 cm diameter with magnesia and further lagged with laminated asbestos to 25 cm diameter. The entire pipe is further protected by a layer of canvas. If the temperature under the canvas is 20°C, find the mass of steam condensed in 8 hrs on a 100m length of pipe and interface temperature. Take thermal conductivity of magnesia as 0.07 W/m – K and that of asbestos as 0.082 W/m – k. Neglect the thermal conductivity of the pipe material. The latent heat of steam for given conditions can be taken as 1951 kJ/kg–K.
A 10 cm diameter pipe is covered by 2 layer of logging. the inside layer is 4 cm thick and has a coefficient of thermal conductivity of 0.08 w/m-k. the outside layer is 3 cm thick and has coefficient of thermal conductivity of 0.15 w/m-k. the steam main conveys steam a pressure of 1.7 mpa with 25 C superheat. the outside temperature of the lagging is 27 C. if the steam main is 30 m long, determine the interface temperature of the lagging and overall coefficient of heat transfer based on outside area.
There are 2 different types of fins: circular section and square section. Both fins are 30 cm length and they are made of copper with 380W/mK_conductivity. The circular section fin diameter is D = 3mm and the lateral width of the square section fin is W = 50 mm. The fin base temperature is -10°C. The fins are immersed in an oil bath at 50°C and perpendicular velocity to the axis of the fins. Obtain the maximum heat rate absorbed in each types of fin for an oil velocity of 60 m/s. Justify every calculation and assumption. Answer: 27.42W (circular section); 987.53W (square section parallel oriented); 1018.6W (square section oblique oriented)
A room is well insulated apart from a single-glazed window measuring 1 m2 and 4 mm thick. The internal air temperature is 22oC and outside it is -12oC. If the external convective heat transfer coefficient, hout, is double that of the inside coefficient, and the conductivity in the glass is negligible. Determine hout if Q = 100 W.
3. A pipe carrying the liquid at -20°C is 10 mm in outer diameter and is exposed to ambient at 25°C with convective heat transfer coefficient of 50 W/m²-K. It is proposed to apply the insulation of material having thermal conductivity of 0.5 W/m-K. Calculate the heat loss for 2.5 mm, 7.5 mm and 15 mm thickness of insulation over 1 m length. Which one is more effective thickness of insulation?
Solve it pls.
Steam flows at 300 °C through the given pipe with an inner radius of 5 cm and a wall thickness of 1 cm. The heat transfer coefficient of the pipe material is 30 W/m.°C'and the outer surface temperature of the pipe is T-300 °C at a'constant tempèrature of 220 °C. Assuming that h-18 W/m2C the heat transfer is only in the r direction, extract the equation expressing the temperature distribution and calculate the amount of heat discharged from the pipe to the environment. T- 220 °C BUHAR L- 3m
A 10 cm thick and 1 m wide long steel plate is immersed in an oil bath at T0=40°C when the temperature is T1=240 ° C. Heat transfer coefficient between plate and oil is h=600 W/m2K and p=7833 kg/m3 for steel, cp=465 J/kgK, k=43 W/mK, (alpha) = 1.2x10^(-5) m2/s. A) After how long the core temperature of the steel plate becomes 100 ° C. B) What is the temperature inside 3 cm from the surface of the steel plate happens. C) Within this period, per unit length plate what is the amount of heat that passes.
Kindly give me right solutions with clear calculations.
An electric motor is to be connected by a horizontal steel shaft (k - 42.56 W/m.K), 25 mm in diameter to an impeller of a pump, circulating liquid metal at a temperature of 540°C. If the temperature of electric motor is limited to a maximum value of 52°C with the ambient air at 27°C and heat transfer coefficient of 40.7 W/m?K, what length of shaft should be specified between the motor and pump ?