For the beam shown in the figure below, draw the influence line for RC, and determine the maximum absolute reaction (negative or positive) at C in kN due to a concentrated live load of 36.2KN, a uniformly distributed live load of 22 kN/m, and a uniformly distributed dead load of 10 kN /m. Enter absolute value only. BA 4 m 6 m

For the beam shown below, construct the Influence diagrams of the following functions: reaction at F, reaction at D and the moment at E. Also calculate the value of the maximum moment at C due to a concentrated load with a magnitude of P (your assigned P). A 1.0 78 minim 3.0 3.0 с D mm E All distances are in meters 2.0 the 4.0 3.0 F M mum

Problem # 1: A hollow shaft has an outside diameter 60 mm and a wall thickness of 1.25 mm. The maximum shear stress in the shaft must be limited to 150 MPa. Use G = 43 000 MPa. Determine: (a) the maximum power that can be transmitted by the shaft if the rotation speed must be limited to 20 Hz. (b) the magnitude of the angle of twist in a 700-mm length of the shaft when 30 kW is being transmitted at 8 rpm.

Draw the influence lines when a = 3 b = 3 c = 2 d = 2