C1 (a). A lubricating oil having the dynamic viscosity of 0.058 poise and kinematic viscosity of 0.14 stokes. Calculate (i) the density of oil in kg/m3, (ii) the weight density of oil in N/m3, (i) the specific gravity, and (iv) the specific volume in m3/kg.
Q: Explain in your own words: In the study of fluid phenomena, how does Newton's Law of Viscosity…
A: According to Newtonian law of viscosity the shear stress is directly proportional to the velocity…
Q: L Moving belt, width b O Oil, depth h The belt in Fig. P1.52 moves at a steady velocity V and skims…
A:
Q: What will be the diameter (in mm) of a water droplet, the pressure inside which is 0.00141 N/cm2…
A: We know for water droplet excess pressure inside it,P=4σ/D
Q: is 100 m long, the shape of it hull is roughly cyli9ndrical with a diameter of 15 m. when it is…
A:
Q: An incompressible fluid (kinematic viscosity, 7.4 x10-7 m2/s, specific gravity, 0.88) is held…
A:
Q: Find kinematic viscosity of a liquid in stokes whose specific gravity is 0.95 and dynamic viscosity…
A:
Q: Problem 1 (a) Define and explain the following terms: Newtonian and non-Newtonian fluids…
A:
Q: 4. What is the kinematic viscosity of kerosene in ft /s at u=1.64centiPoise? Density of kerosene is…
A: Kinematic viscosity is directly proportional to dynamic viscosity. Kinematic viscosity is inversly…
Q: A square block weighing 1.1 kN and 250 mm on an edge slides down an incline on a film of oil 6…
A:
Q: A certain water flow at 20 ° C has a critical cavitationnumber, where bubbles form, Ca ≈ 0.25, where…
A: Given: The critical cavitation number of the water flow is Ca=0.25 The atmospheric pressure is pa=1…
Q: what is the relationship between the fluid viscosity and the drag force Fdrag?
A:
Q: A square block weighing 1.1 KN and 250 mm on an edge slides down an 20 degrees inclined on a film of…
A:
Q: Q1: Calculate the dynamic viscosity of an oil, which is used for lubrication between a rectangular…
A:
Q: Estimate the density of a 0.8-specific gravity dead oil at 40 C
A: Given data Specific Gravity of oil = 0.8 Temperature at which it is measured = 40°C
Q: Taylor number (Ta) is used here to describe the ratio between the inertia effect and the viscous…
A: Solution: Taylor number depends upon (i) inner radius (r) (ii) cylinder tangential velocity (v)…
Q: pllllzzzz help me right nowww plzzz The belt moves at a steady velocity V and skims the top of oil…
A: Given data: V= 3.5 m/s L= 2 m b = 60 cm h = 3 cm Need to determine the required belt-drive power.
Q: Please explain kinematics of fluid flow and place examples thanks:)
A:
Q: What is the kinematic viscosity of kerosene in ft/s at u=1.64centiPoise? Density of kerosene is…
A: Kinematic viscosity is ratio of dynamic viscosity and density of fluid.
Q: deilling fluid or drilling mud density 863 26/9allan. dePth- to00 ft + ConVert reading to Water…
A: Given Density = 8.63 lb / gallon Find Density interns of lb / ft3, psi / ft, and SG
Q: Find the friction factor: Diameter, D=50 cm velocity, v=1 m/s Kinematic Viscosity=1 mm2/s Relative…
A: Diameter, D=50 cm=0.50 mVelocity, V=1 m/sKinematic Viscosity, ν=1 mm2/s=1*10-6 m2/sRelative…
Q: In a falling-ball viscometer, a steel ball 1.6 mm in diameter is allowed to fall freely in a heavy…
A: Given data Diameter of steel ball (d) = 1.6 mm = 1.6 * 10-3 m S.G. of oil = 0.95 weight density of…
Q: The Ekman number, Ek, arises in geophysical fluiddynamics. It is a dimensionless parameter combining…
A: Given data: The Ekman number is Ek. The seawater density is ρ. The characteristic length is L. The…
Q: Q1: Calculate the dynamic viscosity of an oil, which is used for lubrication between a rectangular…
A: The free-body diagram of the rectangular plate will be given as follows,
Q: SAE 10W30 motor oil has a dynamic viscosity of 0.21 kilograms per meter second and a specific…
A: Given data as per question
Q: I'm looking for a conclusion based on this given result from the Falling sphere viscometer.
A: Falling sphere viscometer is used to determine the viscosity of the liquid inside the glass tube.…
Q: d its kinematic viscosity in m?/s and in stokes
A: To find Absolute viscosity Kinematic viscosity
Q: QI\ A ball made of INOX AISI 365 steel with density of 8.52 gr/cm3 was used to determine the…
A: Given that the density of the steel ball (ρb)= 8.52 gm/cm3 = 8520 kg/m3 ; Also the sp. gravity of…
Q: Example: A Styrofoam cylinder, filled with water, sits on a table. You then poke a small hole…
A:
Q: Example :- Calculate the power in W/m3 required for mixing an oil of relative density 0.93 and…
A:
Q: A solid cone of angle 2θ, mass (m), base radius (r0), and density (ρc), is rotating with angular…
A:
Q: Ex, 11 : Calculate the density of paraffin oil, if glass capillary of diameter 0.25 mm dipped in…
A:
Q: Find the friction factor: Diameter, D=50 cm velocity, v=1 m/s Kinematic Viscosity=1 mm2/s…
A:
Q: In Falling ball Viscometer, the density of the ball is p=7746.8 kg/m and its radius is 4 mm, the…
A: in a falling ball viscometer there is an equilibrium achieved between Gravitational pull, buouancy…
Q: The viscosity of motor oil is 4.79× 10-3 N. s/m², motor oil is used as a lubricant between two…
A: Given- μ = 4.79 ×10-3 N.s/m2τmax =62.8 N.m2V = 1.5 m/s Let the required spacing between machine part…
Q: At 68 ̊F water has a dynamic viscosity of about 2.11 x 10^-5 lb-s / ft^2, solve the kinematic…
A:
Q: Example :- Calculate the power in W/m required for mixing an oil of relative density 0.93 and…
A: Given dataRelative density ρr = 0.93Viscosity μ = 18Ns/m2Diameter of the tank D = 15cmHeight of the…
Q: A tape, of width w = 25.40 mm is to be coated on both sides with a lubricant by drawing in through…
A:
Q: A cylindrical plug, 120mm long with a diameter of 95 mm, slides concentrically in a fixed cylinder…
A: Note: As per policy we can solve the first question only from multiple questions. Please resubmit…
Q: Medium oil with kinematic viscosity 6.10 x 10^-6 m^2/s, flows through a strsight pipe at a rate of…
A:
Q: A capillary -tube viscometer is being selected to measure viscosity of a liquid food. The maximum…
A: Solution to Q1 as per our company policy. (e)
Q: (2) A square plate 50 cm × 50 cm weighing 200 N slides down an inclined plane of slope 20º to the…
A:
Q: A square block weighing 1.1 KN and 250 mm on an edge slides down an 20 degrees inclined on a film of…
A:
Q: Fluid Properties- The difference in pressure between the inside and outside of a soap bubble was…
A:
Q: Q23- Water flow through pipes of 4in and 2 in diameter, 50oft and 400ft Length, If e= 0.0031ft and…
A:
Q: The following rheological data were collected on a new "Thick 'n Spicy" brand of tomato catsup at…
A: To Plot: The values in graph and classify the fluid. Given: The rheological data is shown below:…
Q: SA A piston 11.96 cm diameter and 14 cm long works in a cylinder 12 diameter. A lubricating oil…
A:
Q: which fluid mechanics principle explained in terms of the law of consevation of energy? a.…
A: Archimedes principal is based on Buoyant force, in which if a body is placed in a fluid will feel a…
Q: which fluid mechanics principle explained in terms of the law of conservatiiion energy? a.…
A:
Step by step
Solved in 2 steps with 1 images
- C1 (a). A lubricating oil having the dynamic viscosity of 0.052 poise and kinematic viscosity of 0.19 stokes. Calculate (i) the density of oil in kg/m³, (ii) the weight density of oil in N/m³,(iii) the specific gravity, and (iv) the specific volume in m3/kg. (4 Marks) C1 (b). Calculate the capillary effect in mm in a glass tube of 4.2 mm diameter, when immersed in (1) water (2) mercury. The values of surface tension in contact with air are 0.0771 N/m and 0.64 N/m respectively. The contact angle for water =0° and mercury =130°. (3 Marks) (Enter only the values by referring to the unit given. Also, upload the handwritten answers in the link provided) C1(a).(i).The density of oil in kg/m³ Ak C1(a). (ii) the weight density of oil in N/m3 C1(a). (iii) the specific gravity C1(a). (iv) the specific volume in m3/kg C1 (b). 1.The capillary effect (water) in mm C1 (b). 2.The capillary effect (mercury) in mmC1 (a). A lubricating oil having the dynamic viscosity of 0.055 poise and kinematic viscosity of 0.17 stokes. Calculate (i) the density of oil in kg/m3, (ii) the weight density of oil in N/m3,(iii) the specific gravity, and (iv) the specific volume in m3/kg. C1 (b). Calculate the capillary effect in mm in a glass tube of 4.4 mm diameter, when immersed in (1) water (2) mercury. The values of surface tension in contact with air are 0.0737 N/m and 0.54 N/m respectively. The contact angle for water =00 and mercury =1300. (Enter only the values by referring to the unit given. Also, upload the handwritten answers in the link provided) C1(a).(i).The density of oil in kg/m3 C1(a). (ii) the weight density of oil in N/m3 C1(a). (iii) the specific gravity C1(a). (iv) the specific volume in m3/kg C1 (b). 1.The capillary effect (water) in mm C1 (b). 2.The capillary effect (mercury) in mmC1 (a). A lubricating oil having the dynamic viscosity of 0.058 poise and kinematic viscosity of 0.14 stokes. Calculate (i) the density of oil in kg/m3, (ii) the weight density of oil in N/m3, (i) the specific gravity, and (iv) the specific volume in m3/kg. C1 (b). Calculate the capillary effect in mm in a glass tube of 3.6 mm diameter, when immersed in (1) water (2) mercury. The values of surface tension in contact with air are 0.0743 N/m and 0.75 N/m respectively. The contact angle for water =0° and mercury =130°. C1(a).(i).The density of oil in kg/m3 C1(a). (ii) the weight density of oil in N/m3 C1(a). (iii) the specific gravity C1(a). (iv) the specific volume in m3/kg C1 (b). 1.The capillary effect (water) in mm C1 (b). 2.The capillary effect (mercury) in mm
- C1 (a). A lubricating oil having the dynamic viscosity of 0.056 poise and specific gravity of 1.17. Calculate (i) the density of oil in kg/m3, (ii) the weight density of oil in N/m3, (iii) the kinematic viscosity in stokes, and (iv) the specific volume in m3/kg. C1 (b). The capillary effect in a glass tube of 2.8 mm diameter, when immersed in (1) water and (2) mercury are 7.7 mm and -3.5 mm respectively. Calculate the value of surface tension in contact with air for water and mercury in N/m. Take, the contact angle for water =0° and mercury =130°. C1(a). (i).the density of oil in kg/m3 C1(a). (ii) the weight density of oil in N/m3 C1(a). (iii) the kinematic viscosity in stokes C1(a). (iv) the specific volume in m3/kg C1 (b). 1.the value of surface tension (water) in N/m C1 (b). 2. the value of surface tension (mercury) in N/mC1 (a). A lubricating oil having the dynamic viscosity of 0.058 poise and kinematic viscosity of 0.19 stokes. Calculate ) the density of oil in kg/m³, (ii) the weight density of oil in N/m3,(iii) the specific gravity, and (iv) the specific volume in m3/kg. C1 (b). Calculate the capillary effect in mm in a glass tube of 4.4 mm diameter, when immersed in (1) water (2) mercury. The values of surface tension in contact with air are 0.0756 N/m and 0.74 N/m respectively. The contact angle for water =0° and mercury = 130°. ( (Enter only the values by referring to the unit given. Also, upload the handwritten answers in the link provided) C1(a).(1).The density of oil in kg/m3 C1(a). (ii) the weight density of oil in N/m3 C1(a). (iii) the specific gravity C1(a). (iv) the specific volume in m?/kg C1 (b). 1.The capillary effect (water) in mm ----- C1 (b). 2.The capillary effect (mercury) in mmC1 (a). A lubricating oil having the dynamic viscosity of 0.058 poise and specific gravity of 1.11. Calculate (i) the density of oil in kg/m3, (ii) the weight density of oil in N/m3,(iii) the kinematic viscosity in stokes, and (iv) the specific volume in m³/kg. C1 (b). The capillary effect in a glass tube of 2.6 mm diameter, when immersed in (1) water and (2) mercury are 7.4 mm and -3.5 mm respectively. Calculate the value of surface tension in contact with air for water and mercury in N/m. Take, the contact angle for water =0° and mercury =130°. C1(a).(i).the density of oil in kg/m3 C1(a). (ii) the weight density of oil in N/m3 C1(a). (iii) the kinematic viscosity in stokes C1(a). (iv) the specific volume in m³/kg C1 (b). 1.the value of surface tension (water) in N/m C1 (b). 2. the value of surface tension (mercury) in N/m
- C1 (a). A lubricating oil having the dynamic viscosity of 0.057 poise and specific gravity of 1.1. Calculate () the density of oil in kg/m?, (i) the weight density of oil in N/m². ii) the kinematic viscosity in stokes, and (iv) the specific volume in m /kg. (4 Marks) C1 (b). The capillary effect in a glass tube of 2.1 mm diameter, when immersed in (1) water and (2) mercury are 8.5 mm and -2.8 mm respectively. Calculate the value of surface tension in contact with air for water and mercury in N/m. Take, the contact angle for water =0° and mercury =130°. (3 Marks) (Enter only the values by referring to the unit given. Also, upload the handwritten answers in the link provided) C1(a).6).the density of oil in kg/m (1 Mark) C1(a). (i) the weight density of oil in N/m? (1 Mark) C1(a). (ii) the kinematic viscosity in stokes (1 Mark) C1a). (iv) the specific volume in m?/kg (1 Mark) C1 (b). 1.the value of surface tension (water) in N/m (1.5 Marks) C1 (b). 2. the value of surface tension…The kinematic viscosity of liquid oil (10³) C.S (1 stoke =100 C.S) and relative density = 0.92. Find the viscosity of the fluid oil in c.g.s and SI %3D systems.C1 (a). A lubricating oil having the dynamic viscosity of 0.051 poise and specific gravity of 1.12. Calculate (i) the density of oil in kg/m³, (ii) the weight density of oil in N/m3, (iii) the kinematic viscosity in stokes, and (iv) the specific volume in m3/kg. C
- C1 (a). A lubricating oil having the dynamic viscosity of 0.051 poise and specific gravity of 1.12. Calculate (i) the density of oil in kg/m3, (ii) the weight density of oil in N/m3, (iii) the kinematic viscosity in stokes, and (iv) the specific volume in m3/kg. (plz help me with this one , i would appreciate it if you can help me now. A piston with a diameter of 0.8 m and width of L=0.6 m rotates with 6 rad/s inside a cylinder that has a diameter of 1 m that filled with oil that has a viscosity of 8x10-3 N.s/m2 What is the shear force that acts on the circumference of the piston (N)? Assume the variation in velocity of the oil is linear.A square block has 320 mm bottom sides dimensions, weighing W is 1.4 kN on an edge slides down an incline angle 0 is 20° on a film of oil 6 mm thickness, as shown below. Assuming a linear velocity profile in the oil. The viscosity of the oil is 0.009 Pa.s. W y Determine the force acting on the block, F. What is the velocity of the block, V?