Answer atleast till d part it will be helpful if you solve e also -): A 208 V, four-pole, 60 Hz, wye-connected, wound rotor, induction motor has a ratedPart IV (capacity of 30 hp. The components of its equivalent circuit are: R1 = 0.100 0, X1 = 0.210 0, XM = 10.0 0,R2 0.070 Q, X2 = 0.210 Q. Pmec = 500 W; Pmisc= 0; Pnúcl = 400 W. Given a slip of 0.05, find:%3DA) The line current IL.B) The losses in the stator copper PPCE.C) The power in the air gap PEH.D) The power converted from electrical to mechanical form Pconv.E) The induced torque tind.F) The load torque tload.G) The efficiency 7 overall efficiency of the machine.H) The speed of the motor in revolutions per minute and radians per second.I) What is the slip at maximum torque? What is the maximum torque of the motor?1)What is the slip with starting torque? What is the starting torque of the motor?

We are authorized to answer three subparts at a time, since you have not mentioned which part you…

Answered: Answer atleast till d part it will be…

Engineering

Electrical Engineering

Answer atleast till d part it will be helpful if you solve e also

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

Chapter32: Three-phase Motors

Section: Chapter Questions

Problem 6RQ: Name three factors that determine the torque produced by an induction motor.

See similar textbooks

Related questions

Q: 3Ω 5Ω ww 2Ω ) 4 A 10 V

A: Solve the problem

Q: Consider the system shown below. We want to sketch the root locus of this system as the parameter a…

A: Note: As per the policy we can solve only 3 sub parts of a question, please re-upload the remaining…

Q: A self-excited DC generator has lost its residual magnetism and therefore cannot work (cannot…

Q: 7.7.1 For the RC circuit shown in the image below, assuming that the switch has been in position A…

A: As per the guidelines, we are supposed to answer only first question. Please repost the other…

Q: coding program in Scilab for value of x(n)={3,1,2,2};0 ≤ n ≤ 3,

A: The Scilab program code is given below: clear;clc;n=0:1:3;x=[3 1 2…

Q: Assume the reference is the bottom node in the circuit below. Write the nodal equations, solve them,…

A: We will find out the voltage for given circuit.

Q: Calculate lo and the power absorbed

Q: olve for the voltage across the capacitor at t> 0 2(1 – u(t)) A i(t) 10Ω 10 2 ww

Q: Find the RMS Voltage and Average Voltage based from the graph

A: It is given that:

Q: he one-line diagram of a three-phase system is shown in Figure 1. By selecting a common based of 100…

A: Given, Common base power, SB = 100 MVA Base voltage = 32.75 KV

Q: A transistor has a DC Beta of 280 and a base current, IB, of 25 micro Amperes. Find IE 7.868microA…

Q: In the following RLC circuit, the source E is 10 V z 0° , R=100 2. What is the current at the second…

Q: If the collector current IC= 7.95mA and the emitter current IE=8mA, then alpha calculates out to be:…

Q: Ed

A: Circuit diagram is given by,

Q: In the following RLC circuit, the source E is 10 V z 0° , R=100 2, C = 3200 pF and L = 80 mH. What…

Q: 1. Using the Laplace transform definition, find the Laplace transform of the f(t) = 4e2'u(t) +…

A: We need to find Laplace transform of given signal

Q: 5. A power-supply transformer has a turns ratio of 5:1. What is the secondary voltage if the primary…

A: According to the bartleby's guidelines we have to solve only one question posted by students so…

Q: Word list: armature, between, brushes, clockwise, commutator, currents, direction, distortion,…

A: In this question we will complete given dc machine related statements... Note :- as per our…

Q: a) The slip, and rotor mechanical and electrical speeds b) The stator and rotor currents c) The…

A: “Since you have posted a question with multiple sub-parts, we will solve first three subparts for…

Q: 20. Implement the logic circuits in Figure 5-54 using only NAND gates. D. (e) (b) FIGURE 5-54 22.…

A: Logic gate function:

Q: A 4 pole generator with wave wound armature has 50 slots each having 22 conductors. The flux per…

A: Given: A generator with Poles, P=4 Wave wound, A=2 Slots, S=50 Conductors per slot is 22 Flux per…

Q: Calculate the gravimetric capacitance of a carbon based electrode with an aqueous electrolyte…

A: Given: Surface area of the carbon electrode, A=1200 m2/gA=1200×103 m2/g Permittivity of free space,…

Q: A self-excited DC generator has lost its residual magnetism and therefore cannot work (cannot…

Q: Q4- For the network of Figure 4 , determine: a. VG b. VGSQ and IDQ c. IE d. IB e. VD f. VC O 20 V…

A: We need to find out current and voltage for given circuit

Q: The no-load current of a transformer is 4A at 0.25 pf when supplied at 25V, 60Hz. Find the…

Q: Most of the emitter-injected electrons pass through the base region and into the collector region…

A: In this question we will write about why Most of the emitter-injected electrons pass through the…

Q: q1) Consider a transmitter which radiates a sinusoidal carrier frequency of 2250 MHz. For a vehicle…

A: Given: f=2250 MHzv=92 km/hr

Q: explain for me this mealy state and table state

A: Mealy machine is a machine of limited size whose output values are determined by both its current…

Q: (proportional + rate action) Obtain the closed-loop transfer function of the system in gure. Is the…

Q: 4. -4

Q: A 10kVA, 2000/440V transformer has a primary resistance of 1.2 ohms and secondary resistance of…

Q: Figure shows four infinitely long wires carrying the indicated currents. Find the magnetic flux…

Q: The high-frequency response of a BJT amplifier is affected by _ A) the supply voltage C) the…

A: 1. in the low-frequency response coupling and bypass capacitor values affect the most because at the…

Q: 330 k 470 k2 33 ka 12 mV 47 k2 47 kN V2 18 mV FIG. 11.52

Q: H = 28 +3ŷ + 42 4 = 2H0 H2 = 8H0 H, =? The x-z plane is the boundary between two media. If the…

A: Boundary Conditions in Electromagnetics define the most common boundary conditions limited to line…

Q: 10 k2 10 k2 Vo 2.2 k2 V1 0.05 µF FIG. 11.57

A: The solution is given below

Q: Determine the intensities of the currents in the circuit of the figure. Determine the potential…

A: This question belongs to circuit theory . It is based on the concept of nodal analysis in the…

Q: Determine the inductor current i(t) for t > 0 for the circuits in Fig. 7.119. 6 A 4Ω 3 H Fig. 7.119…

Q: Determine IB, Ic, VCE and draw the load line. State whether the transistor is biased in cutoff,…

Q: 2VOLTAGE-CURRENT CHARACTERISTICOF A DIODE 1.Explain how to generate the forward-bias portion of the…

A: Solve the problem

Q: 11- Consider an analog signal given by s(t) = 2 cos(2n 100t) cos(2n10t) is %3D sampled at the rate…

Q: asider the electrical circuit shown in Fig.4: vj(t) IH Vo(r Fig.4 transfer function is: v vi s+10…

Q: Sketch the output wave of the circuit below, with the input wave is given! 120 V C Ideal R Vị E 20 V…

Q: Q2A: A 3-phase induction motor has a star-connected rotor. The rotor e.m.f. at standstill is 50 V.…

Q: Consider a unity feedback system with its forward transfer function G(s) = K/[s(s+2)(s²+2s+5)] %3D…

A: "since you have posted a question with multiple sub-parts, w solve first three sub-parts for you. to…

Q: A transistor has a DC Beta of 250 and a base current, IB, of 20 microA. The collector current, IC,…

Q: 5k Vz 30V 15k Б0-80V

A: We need to find out minimum and maximum current for given circuit.

Q: S 5 -1 s²+4s+6² 2 3

A: This question belongs to signal and system . It is based on the concept of inverse laplace transform…

Q: 10 Q I1 15 10 Q 12 24 V 6 V 13 12 V

Q: Problem - Find v, in the circuit 3Ω 5Ω Vo 2Ω 4 A 10 V

A: Given

Question

Answer atleast till d part it will be helpful if you solve e also

-): A 208 V, four-pole, 60 Hz, wye-connected, wound rotor, induction motor has a rated
Part IV (
capacity of 30 hp. The components of its equivalent circuit are: R1 = 0.100 0, X1 = 0.210 0, XM = 10.0 0,
R2 0.070 Q, X2 = 0.210 Q. Pmec = 500 W; Pmisc= 0; Pnúcl = 400 W. Given a slip of 0.05, find:
%3D
A) The line current IL.
B) The losses in the stator copper PPCE.
C) The power in the air gap PEH.
D) The power converted from electrical to mechanical form Pconv.
E) The induced torque tind.
F) The load torque tload.
G) The efficiency 7 overall efficiency of the machine.
H) The speed of the motor in revolutions per minute and radians per second.
I) What is the slip at maximum torque? What is the maximum torque of the motor?
1)
What is the slip with starting torque? What is the starting torque of the motor?

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step by step

Solved in 7 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Sinusoids and Phasors of Alternating Circuit

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, electrical-engineering and related others by exploring similar questions and additional content below.

Similar questions

L-1). The 3-phase wound-rotor induction motor has .... . a) high starting torque b) low starting current c) both "a" and "b" d) neither "a" nor "b" L-2). The 3-phase wound-rotor induction.........a) motor has a wire wound rotor b) motor's rotor can be connected to an external resistive load by way of slip rings and brushes c) motor requires more maintenance than the 3-phase squirrel-cage induction motor d) all of the above L-3). The 3-phase wound-rotor induction motor's rotor circuit's resistance should be adjusted so it is__________ during starting. a) low b) high c) either "a" or "b" d) neither "a" nor "b" L-4). Will a 3-phase wound-rotor induction motor start with no external circuit connected to its rotor leads? a) yes b) no
Design a DC motor circuit to drive A fan-type load with a torque equation equal to: TL=1.34×10−7ω2TL=1.34×10−7ω2 N.m The fan speed range is from 500 to 1200 rpm. To achieve the required operation, the armature voltage of the motor is adjusted by a single-phase, full-wave, ac/dc converter. The input voltage and frequency to the converter are 480 V (rms) and 50 Hz. choose the motor type, show the motor rating, αα range, Supply voltage, and frequency, and any required other information Modify the design to automatically adjust the voltage drive the load within the specified speed range. show the control variable, controller type, connection, and controller weights.
Design a DC motor circuit to drive A fan-type load with a torque equation equal to: TL=1.34×10−7ω2TL=1.34×10−7ω2 N.m The fan speed range is from 500 to 1200 rpm. To achieve the required operation, the armature voltage of the motor is adjusted by a single-phase, full-wave, ac/dc converter. The input voltage and frequency to the converter are 480 V (rms) and 50 Hz. choose the motor type, show the motor rating, αα range, Supply voltage, and frequency, and any required other information Modify the design to automatically adjust the voltage drive the load within the specified speed range. show the control variable, controller type, connection, and controller weights. design the single-phase, full-wave, ac/ dc converter. show design specifications, the reason for DC motor selection. correct manual circuit, and correct automatic closed-loop control circuit
Frequency of emf in the stator of a 8 pole induction motor is 50Hz and the rotor emf frequency is 1Hz. The motor speed is ................ Answer
(Qld) A three-phase 20-pole induction motor is rated at 800 V, 50 Hz. What is the synchronous speed of this machine if the voltage at its terminals is reduced to 400 V (a) 150 rpm, (b) 300 rpm, (c) 600 rpm, (d) 3000 rpm
• Q5/ in a DC motor. List and describe the types of losses that occur
At standstill condition , the slip of induction motor is 1. Select one: O True O False
6- Which of the following supply is given to the rotor winding of 3-Phase Induction Motor: a) DC Supply b) AC Supply c) No Supply d) Pulsating Supply 7- 3-Phase Induction Motor will have Starting Torque and Starting Current a) High, High b) Low, Low. c) High, Low d) Low, High 8- Which of the following method is used for controlling the speed of an induction motor: a) Changing number of stator poles b) Supply voltage control c) Frequency control d) All the options are correct 9- Which of the following method cannot be used for starting of 3-Phase Squirrel Induction Motor: a) Star-Delta Starting b) Line resistor startling c) transformer Starter d) Rotor Resistance Starting 10- The rotor of a stepper motor has no: a) windings b) commutator c) brushes d) all of the above
A 110 V, 60 Hz, 6 – pole single phase induction motor 1/3 hp has the following equivalent circuit impedances: RI = 1.52 ohm, R2 = 3.13 ohm and x1 =2.10 ohm, x2 =1.56 ohm. Xm=58.2 ohm, The Friction, windage and stry losses =16W, the core loss = 35 W, For a slip of 0.05, calculation (a) input current, (b) power factor, (c) developed power, (d) output power, (e) speed (f) in put power (g) air gab power (h) T ind (i) T load 6) efficiency.
An induction motor having full load torque of 60 Nm when delta-connected develops a starting torque of 120 Nm. For the same supply voltage, if motor is changed to star -connection, then starting torque developed will be Nm.
If a 4-pole induction motor has a synchro- nous speed of 1500 r.p.m., then, supply fre- quency is (1) 50 Hz 60 Hz (iii) (ii) 25 Hz (iv) none of the above
The name plate of single phase induction motor has following data output 373W,230V, frequency 50Hz. Input current 2.9A and power factor is 0.71. Speed 1420 rpm What is efficiency of motor.