An analog signal is to be coded by an ADC. The signal contains significant frequencies up to 3.2kHz. If thesystem is operated at a bit rate of 36,000 bits per second (bps), answer the following:a) To avoid aliasing, the sampling frequency must be greater than or equal tokHzb) If the signal is sampled at the Nyquist rate, what is the Nyquist frequency?kHzhc) If the signal is sampled at the Nyquist rate, the number of bits per sample isnumber of quantization levels isand theNote:*When you use the formula bFs < Bit Rate in finding b, the result must be rounded down to the nearestinteger.**When you use the formula 2 > L in finding b, the result must be rounded up to the nearest integer.

We need to analyse the given sampled signal , we need to find out sampling frequency and number of…

An analog signal is to be coded by an ADC. The signal contains significant frequencies up to 3.2kHz. If the system is operated at a bit rate of 36,000 bits per second (bps), answer the following: a) To avoid aliasing, the sampling frequency must be greater than or equal to kHz b) If the signal is sampled at the Nyquist rate, what is the Nyquist frequency? kHz W c) If the signal is sampled at the Nyquist rate, the number of bits per sample is number of quantization levels is and the Note: *When you use the formula bFs ≤ Bit Rate in finding b, the result must be rounded down to the nearest integer. **When you use the formula 2 > L in finding b, the result must be rounded up to the nearest integer.

An analog signal is to be coded by an ADC. The signal contains significant frequencies up to 3.2kHz. If the system is operated at a bit rate of 36,000 bits per second (bps), answer the following: a) To avoid aliasing, the sampling frequency must be greater than or equal to kHz b) If the signal is sampled at the Nyquist rate, what is the Nyquist frequency? kHz W c) If the signal is sampled at the Nyquist rate, the number of bits per sample is number of quantization levels is and the Note: *When you use the formula bFs ≤ Bit Rate in finding b, the result must be rounded down to the nearest integer. **When you use the formula 2 > L in finding b, the result must be rounded up to the nearest integer.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

An analog signal is to be coded by an ADC. The signal contains significant frequencies up to 6MHz. The quantization error in any one sample value must be within ± 0.5% of the peak-to-peak amplitude range of the ADC. How many binary digits must each sample contain? Apply (or equate) the formulas:Δ = Xmax - Xmin / L - 1where Xmax - Xmin = peak-to-peak amplitude range (XRange)eq[n] = Δ/2 (maximum quantization noise)eq[n] = 0.005 XRange
An analog television signal containing frequencies up to 4.5MHz is to be coded by an ADC. The sampling frequency is 20% above the Nyquist rate. If there are 1024 quantizing levels, determine the rate of transmission.
1- A music signal has frequency content from 0 Hz up to 8.75 kHz. (a) What sampling frequency must be exceeded for successful A/D conversion? (b) What is another name for the minimum sampling frequency?
I would be very happy if you solve the question of this signal processing issue quickly.
1. If the signal is 5 sin 200n t + 2sin400nt. a) Find sampling frequency and Nyquest interval. b) If the sampling frequency is 300 Hz , can you reconstruct the signal? Why? c) Find minimum frequency sampling.
1. With the help of Octave program perform the Modulation and Demodulation (AM) of information signal with carrier signal, through subplots with following signals a. Modulating signal b. Modulated signal c. Demodulated signal
NUMERICAL DATA COMMUNICATION An analog signal in sine form is intended to be transmitted to the receiver by pulse code modulation.Given below Define the parameters and answer the questions asked from you. *Peak to peak amplitude = xxx volts *Signal frequency = xxx Hz *Medium height form factor: xxx level 1-)What should be the theoretical minimum sampling frequency for the signal to be reconstructed in the receiver without distortion? 2-) What should be the practical minimum sampling frequency for the signal to be recreated in the receiver without distortion?
We want to design a digital circuit that converts Gray code (ABC) to Binary code (xyz). Set up a 8-to- 1 line multiplexer so that the output gives y as a function of ABC. "A" is given to the most significant bit of the control inputs of the multiplexer. "C" is given to the least significant bit of the control inputs of the multiplexer.
Pulse-code modulation (PCM) is the standard form of digital audio in computers, compact discs, digital telephony and other digital audio applications. Figure 3 shows the 3bit PCM system that transmit the 250 kHz analog signal with the voltage range from -6 mV to 6 mV. i) Identify the quantized value, voltage range and binary code for each level by building your own quantization table. ii) Calculate the minimum sampling rate and sampling time. ii) Identify the corresponding sampled voltage, the quantized voltage and binary code if the input signal is sampled at time t1 = 2us, t2 = 4us, t3 = 6us, t4 = 8µs. iv) Sketch the output in (iii) if it is fed to Manchester coding line encoder with bit rate of 20000 bit/sec and amplitude of +4 V. 5 4 3 2 10 Timel(usec) Figure 3 Amplitude (mV)
For the signal flow graph of the given figure consider the following statements: 1. It has three forward paths. 2. It has three individual loops. 3.lt has two non touching loops. out of above the correct statements are * X2 X3 O 1,3 O 1, 2, 3 O 1,2 O 2, 3
According to the figure below determine the following 1. What is the name of this type of modulation - 2. Determine the modulation index 3. Determine the amplitude of carrier and the amplitude of information signals 4. Write down the mathematical form of the signal assume the carrier frequency 10 MHz and information frequency 1 KHz. 5. If we want change the modulation index to be 1, how would your answer to parts three & four change? Amplitude 1.5 0.5 -0.5
What is the period and frequency of this signal? Is the frequency constant?What is the bit rate of a given signal?What is the baud rate of a given signal?