Air at 25°C flows past a flat plate at 2.5m/s. the plate measures 60 cm X 30 cm and is maintained at a uniform temperature of 95°C. Calculate the heat loss from the plate if the air flows parallel to the 60 cm side. How would this heat loss be affected if the flow of air is made parallel to the 30 cm side. what is the percentage change.

Air at 25°C flows past a flat plate at 2.5m/s. the plate measures 60 cm X 30 cm and is maintained at a uniform temperature of 95°C. Calculate the heat loss from the plate if the air flows parallel to the 60 cm side. How would this heat loss be affected if the flow of air is made parallel to the 30 cm side. what is the percentage change.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A 20 °C water flows to 50cmx60cm flat plate with velocity of 6m/s . The flat plate surface temperature is maintained at 40 °C The water flows parallel to the 50cm side of the plate. If the kinematic viscosity of water is 78x10-8 m2/s, What is the local heat flux (Q/A) at the end of the plate (k=0.86 W/m deg C, Re=3840000, and Pr=0.7)?
Given engine oil at 60 oC flows over the upper surface of a 5 m long flat plate which temperature is 20 oC. Justify the value of x (m2/s) to get the turbulent flow for the total drag force and the rate of heat transfer per unit width of the plate. Discuss your idea.
Engine oil at 100°C flows on the top surface of a 1-m-long flat plate maintained at 20°C. The oil’s freestream speed (u infinity) is 0.1 m/s. Find the engine oil properties from the table A.5 A. Evaluate the Reynolds number, local convection coefficient, heat flux and shear stress at the end of the plate (x = L). Is the air flow laminar or turbulent over the plate?B. Evaluate the average convection coefficient, average heat flux, average shear stress and drag force over the plate.
Topic: Heat transfer Completely solve and box the final answer. A 20degC water flows to 50cmx60cm flat plate with velocity of 6m/s . The flat plate surface temperature is maintained at 40deg C. The air flows parallel to the 50cm side of the plate. If the kinematic viscosity of water is 78x10-8 m2/s, at what length the flow become turbulent? If the average laminar heat transfer coefficient of water is 7740W/m2 degC, what is the overall heat transfer at the laminar section?
A 20 °C water flows to 50cmx60cm flat plate with velocity of 6m/s . The flat plate surface temperature is maintained at 40 °C . The air flows parallel to the 50cm side of the plate. If the kinematic viscosity of water is 78x10-8 m2/s, at what length the flow become turbulent? If the average laminar heat transfer coefficient of water is 7740W/m2 °C , what is the overall heat transfer at the laminar section?
Air at standard pressure flows across a flat plate at 3m/s. The temperature surface is 50oC and the surrounding temperature is 20o Consider a point 1m away from the leading edge of the plate. See Table A-15 in Appendix 1 for properties of air. Find the local Nusselt number. Based on this Nusselt number, what is the local convective heat flux from the plate to the air?
Consider an airflow over the surface of a flat plate with a temperature Ts = 250 °C. At some distance from y the origin, the temperature profile of the airflow is given by the following function: q/A As, Ts T(y) = T, -(T. -T3)exp -u. y a fluido dAs The airflow at atmospheric pressure has a free flow velocity u.. = 0.06 m/s and a temperature T = 15°C. The thermal diffusivity of the fluid is aluid = 3.872E-05 m?/s and its thermal conductivity Afluid = 0.03383 W/(m K). 1. Determine the heat flux over the surface of the plate. q/A = W/m? 2. Determine the convection coefficient of the airflow. h = W/(m² K)
Air at standard pressure flows across a flat plate at 3m/s. The temperature surface is 50oC and the surrounding temperature is 20o Consider a point 1m away from the leading edge of the plate. See Table A-15 in Appendix 1 for properties of air. Determine the Reynold’s number and Prandtl number for this flow at the location described above. Determine the local flow boundary layer thickness. Determine the local thermal boundary layer thickness for this flow. Find the local Nusselt number. Based on this Nusselt number, what is the local convective heat flux from the plate to the air?
e- Water at 12 °C is to be heated to 60 °C by passing it over a bundle of 3-m-long, 2-cm-diameter resistance heater rods maintained at 95 °C. Water approaches the heater rod bundle in normal direction at a mean velocity of 1.2 m/s. The rods are arranged in-line with longitudinal and transverse pitches of SL = 4 cm and ST = 3 cm. Calculate the number of tube rows Ni in the flow direction needed to achieve the indicated temperature rise.
A steam reservoir is covered by a rectangular plate (its length is 1 m and width 2 m). The steam temperature is 95o C, and it is in contact with the plate. Over the outside surface of the plate, water is flowing at a speed of 3 m/sec at a temperature of 25o C. What is the mean Nusselt number over the plate? What is the mean heat transfer convective coefficient over the plate? What is the heat transfer rate to the water?
An approximation for the boundary-layer shape in is the formula u(y) - U sin 0 sys d where U is the stream velocity far from the wall and d is the boundary layer thickness, as in Fig. If the fluid is helium at 20°C and 1 atm, and if U = 10.8 m/s and 8= 3 cm, use the formula to (a) estimate the wall shear stress Tw in Pa, and (b) find the position in the boundary layer where t is one-half of Tw. -- y = 6 u(y)
Consider a wing in a high-speed wind tunnel. At a point on the wing, the velocity is 850 ft/s. If the test-section flow is at a velocity of 780 ft/s, with a pressure and temperature of 1 atm and 505°R, respectively, calculate the pressure coefficient at the point. detailed solution pls