Adiabatic expansion to V₁. ● Constant volume heat rejection back to P₁, T₁ to complete the cycle. The gas in the cylinder has the following fixed values of the specific heats; Cp = 1004.0J/kg. K, and C₂ = = 717 J/kg K. Perform the following analysis: . a. Calculate pressure, temperature, and volume at each state point and enter in a table like the one below. b. Make a sketch of the cycle on a P-V diagram. Label the cycle state points. c. What is the value of the cutoff ratio for this cycle? d. Find the amount of heat added per cycle, Qin. e. Find the net work produced per cycle, Wnet. f. Find the cycle efficiency, Diesel. Cycle State Point 1 2 3 4 Volume, V (liters) 1.0 Temperature, T (Kelvin) 300.0 Pressure, P (kPa) 100.0

Adiabatic expansion to V₁. ● Constant volume heat rejection back to P₁, T₁ to complete the cycle. The gas in the cylinder has the following fixed values of the specific heats; Cp = 1004.0J/kg. K, and C₂ = = 717 J/kg K. Perform the following analysis: . a. Calculate pressure, temperature, and volume at each state point and enter in a table like the one below. b. Make a sketch of the cycle on a P-V diagram. Label the cycle state points. c. What is the value of the cutoff ratio for this cycle? d. Find the amount of heat added per cycle, Qin. e. Find the net work produced per cycle, Wnet. f. Find the cycle efficiency, Diesel. Cycle State Point 1 2 3 4 Volume, V (liters) 1.0 Temperature, T (Kelvin) 300.0 Pressure, P (kPa) 100.0

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Q1/An air-standard Diesel cycle absorbs 1500 J-mol-1 of heat. The pressure and temperature at the beginning of the compression step are 1 bar and 20°C, and the pressure at the end of the compression step is 4 bar. Assuming air to be an ideal gas for which CP = (7/2)R and CV = (5/2)R, what are the compression ratio and the expansion ratio of the cycle?
An engine operating on an ideal Diesel cycle has a cylinder volume when the piston is at bottom- dead-center (BDC), V1 = 1 liter = 0.001 m3. The intake pressure and temperature are P1 = 100 kPa and T1 = 300 K. The engine cycle contains the following processes: • Adiabatic compression to V1/25. • Constant pressure heating to V1/16. • Adiabatic expansion to V1. • Constant volume heat rejection back to P1, T1. The gas in the cylinder has the following fixed values of the specific heats; Cp = 1004.0 J/kg - K, and Cv = 717 Jkg K. Perform the following analysis: a. Calculate pressure, temperature, and volume at each state point and enter in a table like the one below and make a sketch of the cycle on a P-V diagram. Label the cycle state points. b. What is the value of the cutoff ratio for this cycle, and the amount of heat added per cycle, Qin? c. Find the net work produced per cycle, Wnet, the cycle efficiency, nDiesel, and how much power is produced by this one cylinder if used in a…
2. An ideal OTTO engine, operating on the hot-air standard with k=1.34 has compression ratio of 5. At the beginning of compression, the volume is 6 ft³, the pressure is 13.75 psia and temperature of 100°F. During the constant-volume heating, 340 BTU are added per cycle. Calculate: а. Тз b. e
Hello, this is the problem attached below: An air-standard dual cycle has a compression ratio of 8.6 and displacement of Vd = 2.2 L. At the beginning of compression, p1 = 95 kPa, and T1 = 290 K. The heat addition is 4.75 kJ, with one quarter added at constant volume and the rest added at constant pressure. Determine: a) each of the unknown temperatures at the various states, in K.b) the net work of the cycle, in kJ.c) the power developed at 3000 cycles per minute, in kW.
An air-standard dual cycle has a compression ratio of 8.6 and displacement of Vd = 2.2 L. At the beginning of compression, p1 = 95 kPa, and T1 = 290 K. The heat addition is 4.5 kJ, with one quarter added at constant volume and the rest added at constant pressure. Determine: a) each of the unknown temperatures at the various states, in K. b) the net work of the cycle, in kJ. c) the power developed at 3000 cycles per minute, in kW. d) the thermal efficiency. e) the mean effective pressure, in kPa.
An air-standard dual cycle has a compression ratio of 8.6 and displacement of Vd = 2.2 L. At the beginning of compression, p1 = 95 kPa, and T1 = 290 K. The heat addition is 4.5 kJ, with one quarter added at constant volume and the rest added at constant pressure. Determine: a) each of the unknown temperatures at the various states, in K.b) the net work of the cycle, in kJ.c) the power developed at 3000 cycles per minute, in kW.d) the thermal efficiency.e) the mean effective pressure, in kPa.Correct Answers for part a are: T2 = 670.0 K T3 = 1152 K T4 = 2139 K T5 = 1339 K Please show your solution. Thank you!
An air-standard dual cycle has a compression ratio of 9.1 and displacement of Vd = 2.2 L. At the beginning of compression, p1 = 95 kPa, and T1 = 290 K. The heat addition is 4.5 kJ, with one quarter added at constant volume and the rest added at constant pressure. Determine: a) each of the unknown temperatures at the various states, in K.b) the net work of the cycle, in kJ.c) the power developed at 3000 cycles per minute, in kW.d) the thermal efficiency.e) the mean effective pressure, in kPa.
An air-standard dual cycle has a compression ratio of 9.1 and displacement of Vd = 2.2 L. At the beginning of compression, p1 = 95 kPa, and T1 = 290 K. The heat addition is 4.25 kJ, with one quarter added at constant volume and the rest added at constant pressure. Determine: a) each of the unknown temperatures at the various states, in K.b) the net work of the cycle, in kJ.c) the power developed at 3000 cycles per minute, in kW.
An air-standard dual cycle has a compression ratio of 8.6 and displacement of Vd= 2.2 L. At the beginning of compression, p1= 95 kPa, and T1 = 290 K. The heat addition is 4.75 kJ, with one quarter added at constant volume and the rest added at constant pressure. Determine: a) each of the unknown temperatures at the various states, in K. b) the net work of the cycle, in kJ. c) the power developed at 3000 cycles per minute, in kW. d) the thermal efficiency. e) the mean effective pressure, in kPa. Step 1 X Your answer is incorrect. Determine each of the unknown temperatures at the various states, in K. T2 = i 685.79 K T3 = i 1268.14 K T4 = i 2531.97 K T5 = i 0.55 K Hint
1. An ideal Otto engine, operating on the hot-air standard with k=1.34, has a compression ratio of 5. At the beginning of compression, the volume is 12 m', the pressure is 95 kPaa and temperature is 38 °C. During constant – volume heating, 370 kJ are added per cycle. Compute T3, P3, T4, Qa, Qr, Wnet, thermal Efficiency, and mean effective pressure.
The Fifth Question: A six-cylinder, 4-stroke petrol engine develops 62 H.P at 3000 r.p.m. The volumetric efficiency at N.T.P. is 85%. The bore is equal to the stroke and thermal efficiency of 25 % may be assumed. Calorific value of petrol is 44100 kj/kg. Air-fuel ratio is to be 15:1. Calculate the cylinder bore and stroke.
1. An ideal air-standard diesel cycle with inlet conditions: 21.11˚C and 14.7 psia, 700 Btu/lbm heat input, and a compression ratio of 15. Find P2, T2, T3, V3, P4, T4, and the efficiency of the cycle. Take Note: Assume air standard values for R and k Cp = kR/k-1 Cv = R/k-1 a. Find the value of P2. (in psi or lb/in^2) b. Find the value of T2. (in Rankine) c. Find the value of T3. (in Rankine) d. Find the value of V3. (in ft^3/lbm) e. Find the value of P4. (in psi or lb/in^2) f. Find the value of T4. (in Rankine) g. Find the value of efficiency of the cycle. (ex. 100-%)