A three-phase synchronous generator with a nominal pole voltage of 3300 V, nominal apparent power of 1200 kVA, and an operating frequency of 50Hz is given. The drum's ohmic resistance is negligible. During nominal operation, the generator supplies a load with a power factor (P.F.) of 0.8 inductive.Calculate the real power absorbed by the load during nominal operation.

A three-phase synchronous generator with a nominal pole voltage of 3300 V, nominal apparent power of 1200 kVA, and an operating frequency of 50Hz is given. The drum's ohmic resistance is negligible. During nominal operation, the generator supplies a load with a power factor (P.F.) of 0.8 inductive.Calculate the real power absorbed by the load during nominal operation.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.16P: A single-phase, 120V(rms),60Hz source supplies power to a series R-L circuit consisting of R=10 and...

See similar textbooks

Similar questions

Find the rms value of the induced emf per phase of a 10 pole, three phase, 50 Hz alternator with 2 slots per pole per phase and 4 conductors per slot in two layers. The coil span is 150°. The flux per pole is 0.12 Wb (a) 994 (c) 1020 53. (b) 864 (d) 960
A synchronous generator is generating 395 V at 55 Hz at a field current of 3A. The e.m.f generated when the frequency is 35HZ and the field current is 2.3A is ..............
A 4 pole dc generator with duplex wave winding has 48 slots and four elements per slot. The flux perpole is 2.5 x 10 Maxwells and the speed of the prime mover is 30 rpm. What is the average generatedarmature voltage? Neglecting brush drop.
2. A synchronous generator is connected to an inductive load, please draw phasor diagram to show the relationship between the internal generated voltage of the generator and the terminal voltage across the load. If the same generator is connected to a capacitive load, please draw phasor diagram to show the relationship between the internal generated voltage of the generator and the terminal voltage cross the load again. Explain the difference of the terminal voltage responses at these two types of loads.
8-pole 3-phase star-connected alternator with 144 grooves in its armature rotates at 900 rpm. There are 12 conductors in each groove in the armature of the alternator. The magnetic flux of one pole is 1.8.10 ^ 6 maxwels. Coils (1-16) were wound in -15 steps. Accordingly, find the phase and interphase voltages induced in the inductor of the alternator. (The speed of the alternator will be taken as synchronous speed ns.)
A 6-pole ,3 phase , 60 cycle alternator has 12 slots per pole and four conductor per slot. The winding is 5/6 pitch. There are 2,500,000 Maxwell ( 0.025 weber ) entering the armature from each north pole, and this flux sinusoidally distributed along the air gap. The armature coils are all connected in series , The winding is wye connected. Determine the open circuit emf of the alternator.
There are 72 slots in a 3-phase, 8-pole, 50 Hz, star connected alternator. There are 2 conductors in each slot and all the conductors in a phase are connected in series. Coil span is 150° electrical and the flux per pole is 0.05 Weber sinusoidally distributed. Calculate the emf induced per phase.
A 6 pole DC wave wound generator has 28 armature conductors with flux per pole is 23 mWb and the e.m.f generated is 64 V, then the speed of the machine is O 99.38 rps O 0.63 rps O 33.13 rps O 6.34 rps The thermocouples are suitable for temperature measurement applications in the range of 200°C to over 2000°C. Select one: O True O False
1.3 A single-phase AC generator feeds a load. The generator may be modeled as an ideal sinusoidal voltage source (Ef volts) in series with an ideal inductance (X 2 ohms) and a small winding resistance (Ra=0.5 ohms). The load draws a current of (IL = 10 amps) with a power factor of 80% lagging at a fixed load voltage (VL 240 volts). The voltages and current just mentioned are all in their rms values. Draw and label the circuit, write down the governing equation(s) and draw an appropriate phasor diagram for this operation. Calculate the angle between phasors Ef and V₁. Neglect the resistance Ra and calculate the power flow from the source to the load by using the formula V₁| |V₂| X12 P = = = sin (8). Compare this value with the load power calculated from V I cos (0).
A 6-pole, 3-phase, 60-cycle alternator has 12 slots per pole and four conductors per slot. The winding is 5/6 pitch. There are 2,500,000 maxwells (0.025 weber) entering the armature from each north pole, and this flux is sinusoidally distributed along the air gap. The armature coils are all connected in series. The winding is wye-connected. Determine the open circuit emf of the alternator.
A two-pole dc generator is built with nine turns per coil, 48 coils, and is wave-wound. The field excitation is adjusted to produce 0.00496 weber per pole of flux and is rotated at 183.2 radians per second. Determine the total generated voltage
A 6 pole DC wave wound generator has 26 armature conductors with flux per pole is 21 mWb and the e.m.f generated is 63 V, then the speed of the machine is O 6.55 rps O 0.66 rps O 38.46 rps O 115.38 rps The Auto transformers are used to provide a variable voltage output Select one: O True O MEEZ11ON-Electrical O False