A submarine is modeled as a cylinder with a length of 440 ft, a diameter of 50 ft, and a conning tower, as shown in the figure below. The submarine can dive a distance of 50 ft from the floating position in about 30 s. Diving is accomplished by taking water into the ballast tank so the submarine will sink. When the submarine reaches the desired depth, some of the water in the ballast tank is discharged leaving the submarine in "neutral buoyancy" (i.e., it will neither rise nor sink). 3% of cylinder 7% of cylinder volume volume 25 ft Ballast tank Partially submerged position 3 ft 50 ft Y'water = 64 lb/ft³ + Totally submerged position Water For the conditions illustrated, find (a) the weight of the submarine and (b) the volume of the water that must be in the ballast tank when the submarine is in neutral buoyancy. For seawater, S = 1.03. (a) W- 5.866 *107 lb (b) == 146344 ft³

A submarine is modeled as a cylinder with a length of 440 ft, a diameter of 50 ft, and a conning tower, as shown in the figure below. The submarine can dive a distance of 50 ft from the floating position in about 30 s. Diving is accomplished by taking water into the ballast tank so the submarine will sink. When the submarine reaches the desired depth, some of the water in the ballast tank is discharged leaving the submarine in "neutral buoyancy" (i.e., it will neither rise nor sink). 3% of cylinder 7% of cylinder volume volume 25 ft Ballast tank Partially submerged position 3 ft 50 ft Y'water = 64 lb/ft³ + Totally submerged position Water For the conditions illustrated, find (a) the weight of the submarine and (b) the volume of the water that must be in the ballast tank when the submarine is in neutral buoyancy. For seawater, S = 1.03. (a) W- 5.866 *107 lb (b) == 146344 ft³

Name: A submarine is modeled as a cylinder with a length of 440 ft, a diame
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A submarine is modeled as a cylinder with a length of 440 ft, a diameter of 50 ft, and a conning tower, as shown in the figure below. Thesubmarine can dive a distance of 50 ft from the floating position in about 30 s. Diving is accomplished by takin

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

As shows a 100 g block of copper (ρ = 8900 kg/m3) and a 100 g block of aluminum (ρ = 2700 kg/m3) connected by a massless string that runs over two massless, frictionless pulleys. The two blocks exactly balance, since they have the same mass. Now suppose that the whole system is submerged in water. What will happen?A. The copper block will fall, the aluminum block will rise.B. The aluminum block will fall, the copper block will rise.C. Nothing will change.D. Both blocks will rise.
A pneumatic tube system is used in a hospital to quickly transport laboratory samples across the building. A cylindrical canister (radius r = 12.5 cm, mass m = 950 g) containing the sample is placed in a tube with roughly the same radius. The bottom of the tube is exposed to atmospheric pressure, but the portion of the tube above the canister is maintained at a slightly lower pressure, which sucks the canister into the tube. For the questions below, use 101,325 Pa for atmospheric pressure, and maintain 6 significant figures on your numerical answers. What absolute pressure P must be maintained in the portion of the tube above the canister in order to keep the canister stationary? (For simplicity, assume that the tube is coated with a non-stick surface so that friction can be ignored). What is the gauge pressure above the canister in the scenario described above? If tube system operator lowers the absolute pressure found in part (a) by 1.00%, then what is the acceleration of the…
An empty long neck bottle with an upper cylinder diameter of 1 inch, with the length of 4 inches and lower cylinder measures 4 inches in diameter and length of 5 inches is vertically immersed in a body of water. How deep will you submerged the bottle from the mouth opening in order to occupy the whole bottle neck with water. please show the formula used and cancellation of units, if possible include illustration also.
A 10cm x 10 cm x 10cm block of steel (ρsteel = 7900 kg/m3) is suspended from a spring scale. The scale is in Newtons. a. What is the scale reading if the block is in air? b. What is the scale reading after the block has been lowered into a beaker of water and is completely submerged?
1. Consider a conic reservoir of unit depth that is initially filled with water at the height of h = 200 mm. A rigid cuboid block, with dimensions of 10 cm x 5 cm x 3 cm, is then dropped into the water. When the equilibrium state is reached, the block floats on the water's surface, as shown in the figure. If the specific gravity of the block is 0.5, determine the change in the free surface position of the water, i.e., Ah, in mm. %3D Hint: You can calculate the volume of liquid inside the conic reservoir with a unit depth in terms of the liquid height as V = th³/3. Ah block water water
What is the value of the surface tension of a small drop of water 0.3 mm in diameter which is in contact with air if the pressure within the droplet is 561 Pa?
5. At a particular temperature, the surface tension of water is 0.73 N/m. Under ideal conditions, the contact angle between glass and water is zero. A student in a laboratory observes water 0. 1mm. What is the theoretical height of the capillary rise? in a glass capillary tube with a diameter of
A spherical buoy is moored to a river bed. The river flows from left to right. Because of flow, the line that ties the buoy is tilted 5° from the upright position, as shown in the graph to the right. At this location the top surface of the buoy is just below the water surface. The effective specific gravity of the buoy is 0.65. The diameter of the buoy is 2 ft and the line is 4 ft in length. What is the force acting on the line? What is the horizontal force acting on the buoy that comes from the flow? Surface Flow 85°
A barrel is filled with two unknown fluids. The total hydrostatic pressure at the bottom of the barrel is 6.51 kPa. If the pressure of fluid 1 is twice as the pressure produced by fluid 2, find the specific gravity of the denser fluid if it occupies 2/3 of the barrel’s height. The height of the barrel is 0.5m. (The shape of the barrel is uniform).
Which is the most accurate statement of Bernoulli's Principle? Select one: O a. Fast -moving air causes lower pressure O b. Lower pressure causes fast-moving air O c. Both A and B O d. None of these The body is stable if the center of gravity of the body is below the metacenter. Answer: The amount of energy per pound or Newton of fluid is called the head. Answer: For incompressible fluids, the flow rate is constant (write in small letters).
The wooden board is hinged to the wall of the tank.
A cylindrical water tank used in lifting water to the top of a tower is 1.5 m high. If the pressure at the bottom of the tank is must not exceed 16 kPa, what maximum vertical acceleration can be imposed in the cylindrical when it is filled with water. Subject: Fluid Mechanic Lesson: Relative Equilibrium of Liquids Fundamentals of Fluid Flow