5. A six-cylinder, 6.70 x 5.70 cm, refrigerant 22 compressor operating at 1800 rpm indicates a refrigerating capacityof 96.4 kW and a power requirement of 19.4 kW at an evaporating temperature of 5°C and a condensingtemperature of 35°C. Compute (a) the clearance volumetric efficiency if the clearance volume is 5%, (b) the actualvolumetric efficiency, and (c) the compression efficiency.

Answered: Image /qna-images/answer/acdf0ea6-4685-408f-9b05-58a93001c9aa.jpg

A six-cylinder, 6.70 x 5.70 cm, refrigerant 22 compressor operating at 1800 rpm indicates a refrigeratingc of 96.4 kW and a power requirement of 19.4 kW at an evaporating temperature of 5°C and a cond temperature of 35°C. Compute (a) the clearance volumetric efficiency if the clearance volume is 5%, (b) the volumetric efficienCy and (c) the compression efficienoy

A six-cylinder, 6.70 x 5.70 cm, refrigerant 22 compressor operating at 1800 rpm indicates a refrigeratingc of 96.4 kW and a power requirement of 19.4 kW at an evaporating temperature of 5°C and a cond temperature of 35°C. Compute (a) the clearance volumetric efficiency if the clearance volume is 5%, (b) the volumetric efficienCy and (c) the compression efficienoy

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter45: Domestic Refrigerators And Freezers

Section: Chapter Questions

Problem 12RQ: Refrigerators currently being manufactured in the United States are using______as their refrigerant.

See similar textbooks

Similar questions

Condensers in these refrigerators are all_______cooled.
Refrigerators currently being manufactured in the United States are using______as their refrigerant.
3.) An ammonia compressor operates at evaporator pressure of 316.02 kPa and a condenser pressure of 1557 kPa. A twin-cylinder compressor with bore to stroke ratio of 0.85 is to used at 1200 rpm. The actual volumetric efficiency is 92% and compression and mechanical efficiency is 78% and 80% respectively. For a cooling capacity of 25 TR, (a) the sketch the p-h diagram labeling the evaporating and condensing temperature and pressures (b) define the all properties of ammonia taken from saturation table. Determine (c) the quantity of cooling water in the condenser in kg/min if the increase in temperature is 8°C, (d) the bore and stroke expressed in cm and (e) the size of the driving motor in hp. Given: h2 = h at 1557 kPa and s2 = s1 1695 kJ/kg
A 140 mm x 140 mm single effect , twin -cylinder , single acting Freon 12 compressorwith a refrigeration capacity of 40 Kw operates between a discharge pressure of 1300 KPa and asuction pressure of 350 KPa . The speed of the compressor is 600 rpm . If the discharge pressureshall be raised to 1400 KPa , at what speed (rpm) should the compressor be run to produce thesame refrigeration capacity and assuming the volumetric efficiency to remain the same ?A) 613 C) 630B) 621 D) 650
The catalogue for a refrigerant 22, four-cylinder, hermetic compressor operating at 29 r/s. a condensing temperature of 40 °C and an evaporating temperature of -4 °C shows a refrigeration capacity of 96.4 kW. At this operating points the motor (whose efficiency is 90 percent) draws 28.9 kW. The bore of the cylinders is 87 mm and the piston stroke is 70 mm. The performance data are based on 8 °C of subcooling of the liquid leaving the condenser. Compute 3.1 the actual volumetric efficiency and 3.2 the compression efficiency.
ASSIGNMENT 3 A Standard Refrigeration system using R22 has condensing pressure of 1812.1 kPa and vaporizing pressure of 421.35 kPa. The refrigeration capacity is 28 tons. A four-cylinder, double acting compressor has the following data: shaft speed, 1800 rpm; piston speed, 342 cm/s; bore-to-stroke ratio, 1.2; 5% clearance volume Determine (a) t, h, V, S, (b) t, ha, Va, S2 .. show double interpolation (c) P,, t, h, (d) Pa ha, X. (e) Draw the ph Diagram and system diagram (f) mass flow rate of refrigerant (g) isentropic work of compressor (h) ideal coefficient of performance (i) power per ton of refrigeration (i) volume flow capacity of compressor (k) Stroke in cm of compressor (I) Bore in cm of compressor (m) Volume displacement of compressor (n) actual volumetric efficiency (0) compression ratio (p) clearance volumetric efficiency (q) mechanical efficiency of compressor if motor is 46 kw
A simple vapour compression plant produces (5 tonnes) of refrigeration. The enthalpy values at inlet to compressor, at exit from the compressor, and at exit from the condenser are (183.19, 209.41 and 74.59 kJ/kg) respectively. Determine :- (i) The refrigerant flow rate, (ii) The C.O.P. (iii) The power required to drive the compressor. (iv) The rate of heat rejection to the condenser.
A vapor compression refrigeration systemhas an enthalpy of saturated liquid at the hightemperature side is 341.769 kJ/kg while at lowtemperature side is 131.27 kJ/kg and a latentheat of vaporization of 1312.63 kJ/kg. If themass flow rate of refrigerant is 0.50 kg/s.compute the tons of refrigeration.
6.2 Catalogue data of 4.8% clearance R 134a compressor with piston displacement of 2 m/min shows the capacity to be 12.7 TR with a bhp of 13.5 when the suction conditions are 18°C & 3.19 bar and the condensing temperature is 35°C. The refrigerant leaves the condenser as saturated liquid. Calculate the actual and clearance volumetric and adiabatic compression efficiencies of the compressor at these conditions
A surface condenser serving a 50,000-kW steam turbo-generator unit receives exhaust steam at the rate of 196,000 kg/hr. Vacuum in condenser is 702 mmHg. Sea water SG=1.03 and Cp=0.93 Btu/lb-F is used for cooling enters at 29.5C and leaves at 37.5C. From the steam condenser design, manufacturer consider 950 Btu/lb of steam condensed as heat given up cooling water. Calculate the required quantity of cooling water in m3/s.
An ammonia simple vapor operates between evaporator and condenser temperature of -20°C and 35°C respectively. The system used producing 5000kg of ice in 20hrs. A 100x200mm compressor with a compression efficiency of 80% and electric input to the motor driving the compressor is 14kW. Motor efficiency is 90%. Determine: (a) Qe (b) Work indicated (c) Brake work (d) Mechanical efficiency
A manufacturer conducted an experiment for an evaporator capacity 507 kW cooling and designed for high COP of 1.8 when using lithium bromide plus water in an absorption refrigeration system. The evaporator operates 20 C, condenser 40 C & absorber 45 C supplying 1.4 kg/s of water plus lithium bromide solution to the generator. For a condenser size of 694 kW, determine: Heat provided by the generator & absorber capacity in kW