A reinforced concrete beam has a width of 300mm and a overall depth of 500mm. The beam is simply supported over a span of 5m. Steel strength is 420 Mpa and concrete strength is 28 Mpa concrete cover is 60mm from the steel area, As = 2000mm^2 %3D Determine the maximum factored moment of the beam What is the factored load that the beam can carry Select the correct response: Mu = 288.17 KN-m Wu = 92.21Kn/m Mu 288.17 KN-m Wu = 73.19Kn/m Mu = 320.18 KN-m, Wu = 102.46Kn/m Mu = 288.17 KN-m Wu = 65.86Kn/m %D

A reinforced concrete beam has a width of 300mm and a overall depth of 500mm. The beam is simply supported over a span of 5m. Steel strength is 420 Mpa and concrete strength is 28 Mpa concrete cover is 60mm from the steel area, As = 2000mm^2 %3D Determine the maximum factored moment of the beam What is the factored load that the beam can carry Select the correct response: Mu = 288.17 KN-m Wu = 92.21Kn/m Mu 288.17 KN-m Wu = 73.19Kn/m Mu = 320.18 KN-m, Wu = 102.46Kn/m Mu = 288.17 KN-m Wu = 65.86Kn/m %D

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A 380mmx520mm beam is reinforced with 5 diameter 28mm steel bars (one layer). Strength of concrete is 30MPa and steel yield strength is 400MPa. Take the steel cover to be 60mm. Determine the balanced moment, kN-m Determine the maximum moment if strain in steel is 0.005 Determine the design strength of the beam, kN-m
A beam carrying an allowable actual moment of -38 KN- m is reinforced as shown. If the the concrete is normal weight and f'c = 25MPa and fy = 420MPa. Determine the following: a. The cracking moment of the beam. b. The transformed moment of Inertia. c. The actual tension steel stress. d. Check the stress if it is correct by force checks. mm www.009 4-020 О 140 mm 300 mm 170 mm * 170 mm: ww.08 ✓ 60 mm
Question 15 The design shear resistance, Vpl.Rd of a fully restrained simply supported Universal Beam with yield strength 345 N/mm² is 1,285 kN A point load of magnitude 1,906 kN is applied at the beam's mid-span The area of the web of the beam is Aw = 5,505 mm² The plastic modulus is Wpl.y = 2,979 cm³ The thickness of the beam web is tw = 12.6 mm Find the reduced design moment of resistance of the beam Mc,Rd (use the formula for l-cross-sections with equal flanges and bending about the major axis) Give your answer in kNm to the nearest whole number. Do not include units in your answer.
An 8 m long steel is simply supported at the left end and 2 m from the right end. It carries a total uniform load of 45 kN/m all throughout its length. STEEL DECION CIVIL ENGINEERING Beam properties: A= 11,500 mm² bf = 250 mm tw- 10 mm d = 350 mm If=: 16 mm lx = 266 x 100 mm If the Beam is laterally supported throughout the beam b) Determine the Maximum Web Shear Stress
2. A distributed load of W N/m is applied over the entire length of a simply supported beam 4m long. The beam has a cross section shown. -200- 20 120 160 20 -160- a. Which of the following gives the value of "W" so that it will not exceed an allowable flexural stress of 10 MPa. b. Which of the following gives the value of "W" so that it will not exceed an allowable shearing stress of 0.80 MPa. c. Which of the following gives theh value of "W" so that the screws have a shear strength of 800 N and a pitch of 50 mm.
The T-beam in the floor system has a slab thickness of 90 mm and supported by beams 6.5 m span. The beam is casts monolithically with the slab. The spacing of beams is 2 m on centers and width the web is 400 mm. The effective depth of the beam is 600 mm. It is reinforced at tension side with 8-28mm Φ bars. fc’ = 28 MPa, fy = 415 MPa 1. Which of the following most nearly give the effective width of the flange? a. 1565 mm b. 1305 mm c. 1275 mm d. 1625 mm 2. Which of the following most nearly gives the depth of compression block? a. 62.25 mm b. 52.86 mm c. 60.26 mm d. 58.29 mm 3. Which of the following gives the nominal moment capacity of the beam? a. 1461.25 kN/m b. 1156.36 kN/m c. 1163.15 kN/m d. 1172.58 kN/m
A steel section has the following properties: A = 0.012 m^2 rt = 0.053m tf = 0.016m Sx = 0.00208 m^3 d=0.210m Fy=248MPa The 5m Beam is subjected to an axial tensile load of 20 kN and a uniformly distributed lateral load of 15 kN/m. a. Compute the axial tensile stress if axial load only existed. b. Compute the axial tensile stress if bending only existed. c. Compute value of both axial and bending moment interaction value.
At which point on the design P-M interaction diagram is the design flexural strength largest? O Pure compression Pure tension Balanced failure point (CCL limit) O TCL limit Beam condition (Pn = 0) %3D //img00.zhaopin.cm
SITUATION 1 Determine (approximately) the force in each member of the truss. Assume the diagonals can support either a tensile or a compressíve force and assuming that the díagonals cannot support a compressíve force. A. Use Method 2 7 k 14 k 14 k 7 k Н F E oo 2 k 380 6 ft A D В C 8 ft 8 ft 8 ft B. Use Method 1 50 kN 40 kN 20 kN E D 3 m B 3 m 3 m
A concrete floor slab 100 mm thick is cast monolithic with concrete beams 2.0 m on centers. The beams have a span of 4 m and have a web width of 250 mm, an effective depth of 400 mm and overall depth of 500 mm. The tensile reinforcement consists of 6-ϕ32 mm bars in two rows. Use material strengths f’c = 21 MPa and fy = 415 MPa. Calculate the ultimate bending moment strength of the T-beam in kN·m. 701 778 711 640
Required information Consider the loading condition shown. Assume that the flexural rigidity El of the beam is constant. 21 W B -L/2L/2L/2- The deflection at point B is. 0013 W Using singularity functions, determine the deflection at point B and point D. (Round the final answers to four decimal places.) The deflection at point Dis. -0.0163 wwwwwwwwww………… 1 D x Deflection point at D is wrong
A concrete floor slab 100 mm thick is cast monolithic with concrete beams 2.0 m on centers. The beams have a span of 4 m and have a web width of 250 mm, an effective depth of 400 mm and overall depth of 500 mm. The tensile reinforcement consists of 6-ϕ32 mm bars in two rows. Use material strengths f’c = 21 MPa and fy = 415 MPa. Calculate the ultimate bending moment strength of the T-beam in kN·m. A. 640 B. 701 C. 778 D. 711