A rectangular footing (4.14 x 4.43 m) is placed 1.38 m below the ground surface. The soil arrangement is composed of sand (ground) for the first 6.29 m and followed by clay for the next 5.94 m. The force acting on the footing is 10581 kN. Determine the resulting stress increase at the midheight of the consolidating layer in kPa. Assume 2V:1H pressure diagram. Unit weight of sand = 16.8 kn/m3. Unit weight of clay = 18.4 kn/m3

A rectangular footing (4.14 x 4.43 m) is placed 1.38 m below the ground surface. The soil arrangement is composed of sand (ground) for the first 6.29 m and followed by clay for the next 5.94 m. The force acting on the footing is 10581 kN. Determine the resulting stress increase at the midheight of the consolidating layer in kPa. Assume 2V:1H pressure diagram. Unit weight of sand = 16.8 kn/m3. Unit weight of clay = 18.4 kn/m3

Principles of Foundation Engineering (MindTap Course List)

9th Edition

ISBN:9781337705028

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter10: Mat Foundations

Section: Chapter Questions

Problem 10.5P

See similar textbooks

Similar questions

A rectangular footing (4.89 x 4.38 m.) is placed 1.21 m. below the ground surface. The soil arrangement is composed of sand (ground) for the first 6.52 meters and followed by clay for the next 6.98 meters. The force acting on the footing is 10,293 kN. Determine the resulting stress increase at the midheight of the consolidating layer in kPa. Assume a 2V:1H pressure diagram. Unit weight of sand = 16.1 kN/m3. Unit weight of clay = 18.7 kN/m3. Use stored value. Answer in five decimal places.
A rectangular footing (4.37 x 4.4 m.) is placed 1.58 m. below the ground surface. The soil arrangement is composed of sand (ground) for the first 6.09 meters and followed by clay for the next 6.09 meters. The force acting on the footing is 10,900 kN. Determine the settlement of the consolidating layer in mm. Assume a 2V:1H pressure diagram. Unit weight of sand = 16.6 kN/m3. Clay has the following properties: Unit weight = 18.5 kN/m3, Void ratio = 98, Liquid limit = 47. Round off to two decimal places.
A rectangular footing (4.5 x 4.36 m.) is placed 1.98 m. below the ground surface. The soil arrangement is composed of sand (ground) for the first 6.94 meters and followed by clay for the next 6.78 meters. The force acting on the footing is 10,700 kN. Determine the settlement of the consolidating layer in mm. Assume a 2V:1H pressure diagram. Unit weight of sand = 16.9 kN/m3. Clay has the following properties: Unit weight = 18.3 kN/m3, Void ratio = 95, Liquid limit = 49. Round off to two decimal places. Answer: 3.35
A rectangular footing (4.55 x 4.8 m.) is placed 1.42 m. below the ground surface. The soil arrangement is composed of sand (ground) for the first 5.55 meters and followed by clay for the next 5.98 meters. The force acting on the footing is 10,647 kN. Determine the settlement of the consolidating layer in mm. Assume a 2V:1H pressure diagram. Unit weight of sand = 16.7 kN/m3. Clay has the following properties: unit weight = 18.9 kN/m^3, void ratio=30, liquid limit = 43
A footing of size 2m×2m transferring a pressure of 200 kN/m², is placed at a depth of 1.5 m below the ground as shown in the figure (not drawn to the scale). The clay stratum is normally consolidated. The clay has specific gravity of 2.65 and compression index of 0.3. 1.5m 1m 1.5 m 200 kN/m² Silty sand Clay Ya =15kN/m³ Y sat = 18kN/m³ Y sat = 17 kN/m³ GWT $0.5 m Dense sand Considering 2:1 (vertical to horizontal) method of load distribution and Y₁ = 10kN/m³, the primary consolida- tion settlement (in mm, round off to two decimal places) of the clay stratum is
A square footing supporting a column applies a uniform pressure of 100 kPa on top of a deep clay deposit. Based on the bulbs of pressure developed below the footing shown in the following figure, which of the following statements are correct (select all that apply)? A.Immediately after construction, the effective vertical stress developed at Points B and C is the same. B.Immediately after construction, the excess pore water pressure (∆u) developed at Point B is lower than ∆u developed at Point A. C.After construction, the excess pore water pressure at Point C dissipates faster than that dissipated at Point B. D.
A clay sanitary pipe is located at a point C below the footing shown below. Determine the increase in the vertical stress Ap at the depth of the pipe, which is z = 5 feet below the footing invert, and 3 feet away from its edge. The footing has a uniformly distributed load q = 1,800 psf. 1,800 5 ft r 2 ft B 10 ft PLAN VIEW 4 ft A T 3 ft 1 9 = B 10 ft SECTION A + 3 ft у с 5 ft
Calculate the settlement of the 10-ft-thick clay layer that will result from the load carried by a 5-ft-square footing. The clay is normally consolidated. Use the 2:1 method to calculate the average increase of effective pressure in the clay layer. 10 ft 10 ft 10 ft 5 ft ↓ Dry sand Footing size 5 ft x 5ft Sand Clay Ydry = 100 pcf Groundwater table Ysat = 120 pcf Ysat = 110 pcf % = 1.0 LL=40
QUESTION 2 A rectangular footing 1000 x 2000 mm shown below is subjected to a vertical point load of 600 kN acting at eccentricities ex = 200 mm and eyy = 100 mm, as show on the Figure below. Calculate the stresses at the corners A and D, and sketch the stress distribution along the face A-D. е 200 mm Vertical force = 600 kN B eyy =100 mm 1 m D. 2m Rectangular footing - Plane
A footing of size 2m x 2m transferring a pressure of 200 kN/m2, is placed at depth of 1.5 m below the ground as shown in the figure (not drawn to the scale). The clay stratum is normally consolidated. The clay has specific gravity of 2.65 and compression index of 0.3. 200 kN/m? 1.5 m GWT Ya = 15 kN/m 18 kN/m elemiu 1 m Silty Sand Ysat = 10.5 m 1.5 m Clay Yat = 17 kN/m Dense Sand Consideration 2:1 (vertical to horizontal) method of load distribution and yw primary consolidation settlement (in mm, round off to two decimal places) of the clay stratum is 10kN/m, the
1. Given the soil profile below, determine the Total Stress and Effective Stress at points A, B, C, and D. CL 5ft y = 102 Ib/ft3 A • 9ft Ysat = 105 Ib/ft3 B 6ft SM C = 115 Ib/ft3 Ysat 12ft D
A 3m × 4m rectangular area carrying a uniform lead 240 kPa is applied to the ground surface having a profile consist of 2 m of silly sand underlain by 3m of clay. The groundwater table is 3m below the ground surface. The sand has a unit weight of 14 kN/m³,the clay has the unit weight of 16 kN/m³ above water table and 20 kN/m³ below water table. a.) determine the approximate vertical stress increment 5m below ground surfaced caused by rectangular footing. b.) determine the total vertical stress at the bottom of the clay layer.