A rectangular beam having a width of 300 mm has an effective depth of 600 mm. Total depth of the beam is 680 mm. The beam is reinforced with 3-32mm at the bottom. Use f'c-28 MPa and fy=415 MPa. a) Using detailed calculation, determine the shear strength provided by the concrete if it is subjected to a factored moment of Mu=134 kN-m which occurs simultaneously with Vu=223 kN. b) Using simplified calculation, determine the shear strength provided by the concrete if it is subjected to a compressive force of 268 kN.

A rectangular beam having a width of 300 mm has an effective depth of 600 mm. Total depth of the beam is 680 mm. The beam is reinforced with 3-32mm at the bottom. Use f'c-28 MPa and fy=415 MPa. a) Using detailed calculation, determine the shear strength provided by the concrete if it is subjected to a factored moment of Mu=134 kN-m which occurs simultaneously with Vu=223 kN. b) Using simplified calculation, determine the shear strength provided by the concrete if it is subjected to a compressive force of 268 kN.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: Determine the force in the member EF , CF and BC of the truss.

A: Determine the force in member EF, CF and BC of the truss.

Q: A masonry dam has a coefficient of permeability in the vertical and horizontal directions of…

A: seepage flow is the flow of a fluid in permeable soil layers such as sand. Uplift pressure is also…

Q: Question 2: For the Aluminium shaft shown in Figure 2 with "Shear Modulus (G) = 27 GPa", determine…

Q: A three-layer soil has the following properties: Layer 1: k = 2.93 x 10^-3 cm/s, H = 3.08 m. Layer…

Q: 50 cm-long circular rod has a diameter of 10 mm and is acted pon by a 20 kN load acting to its…

A: Length of rod = 50 cm Diameter of rod = 10 mm Load = 20 KN E = 200 Gpa

Q: A 6m simply supported beam AB carries 2 concentrated downward loads of P=60KN each placed at third…

A: EI = 21000 KNm2 Determine the slope at the left support A using Double Integration Method.

Q: Q.3/A three-span continuous beam ABCD is simply supported at A and D and loaded as shown in Fig. if…

Q: 10 mm -200 mm- B

Q: The 6-kg sphere is projected horizontally with a velocity of 17 m/s against the 30-kg carriage which…

Q: 5. Determine which isotherm equation (linear, Freundlich or Langmuir) best fits the GAC adsorption…

A: The Freundlich isotherm: x/m = KFCe1/m .....................(1) Take log of equation (1), Log(x/m) =…

Q: 2) Determine the slope and the displacement at the end C of the beam. E-200 GPa, 1=18(10) mm* Use…

A: ###Determination of slope and deflection of beam at C using Conjugate Beam Method####

Q: 1. What is the theoretical deflection (in METERS) at the free end if the spring will be removed? 2.…

A: Given beam with Loading shown above Part 1- theoretical deflection at free end (meter) if spring…

Q: c) 777777 A 10m E = 200 x 10⁹ N/m² I = 2000 x 10-6 m4 B A =0.03m 10m Find the bending moments at B &…

Q: So VDL should belong to upward force instead of downward force side. And the sign should be negative…

Q: A gutter with trapezoidal cross section is to be made from a long strip of metal that is 22 cm wide,…

Q: QUESTION 2 The nigd beam shown is fixed to the top of the three posts made of steel and aluminum.…

A: Aluminum EAL = 73.1 GPa αAL = 12 × 10-6 /°C Steel Est = 200 GPa αst = 23 × 10-6 /°C T1 = 20°C and…

Q: A hydraulic turbine is used to generate power by using the water in a dam. The elevation difference…

Q: metry for the jaws. 6 mm 12 mm G 35 24 20 mmmmmm 27 N -76 mm- B 27 N

A: An applied force is the force applied to an object by someone or something else. An object is…

Q: Water Treatment II- 15th May 2022- Third Class- Pollution Control Branch US 3 Q1: AP. 5 Vs Determine…

Q: The box beam below is constructed from four boards that are fastened together using nails spaced…

A: spacing of nails (s)=2in To find greatest shear force

Q: a circular footing is 2.15 meters in diameter. the bottom of the footing is 2.87m below the ground…

Q: الاول لمادة مقاومة المواد Question # 1: Determine the maximum shear stress acting at section a-a in…

A: Determine the maximum shear stress at section a-a and shear stress at junction. Plot the shear…

Q: A 50 cm-long circular rod has a diameter of 10 mm and is acted upon by a 20 kN load acting to its…

A: Length of the rod, L = 50 cm Diameter of rod, d = 10 mm Load, P = 20 KN = 20 x 103 N E = 200 GPa =…

Q: Given a cantilever beam of length L=4.1meters. The left support “A” is free while the right end “B”…

A: EI = 19000 KNm2 Taking point-A as a origin. Determine the first constant of integration (C1) using…

Q: Check the stability of concrete retaining wall shown in figure against sliding and bearing capacity.…

A: Let us first calculate the active force through the backfill Active force = Area of Active pressure…

Q: C. A tsunami is a sea wave produced by an underwater earthouake. The height of a tsunami as it…

Q: A circular foundation of diameter 8 m supports a tank. The base of the foundation is at 1 m from the…

A: Given Diameter, d=8m γsat=19 kN/m3γd=17.6 kN/m2ϕ=25° Load , P=20 MN Cu=80 kPa

Q: A flexural member is fabricated from two flange plates 1/2x16 and a web plate 1/4x20, thus forming a…

A: The elastic section modulus normally predicts the section that stays elastic. The plastic section…

Q: A concrete pile with a length of 18 m and diameter of 40 cm is built in the soil profile below. the…

A: To calculate long term bearing capacity of given pile, we have Q = Qb+Qf Qb = toe bearing capacity…

Q: 5-87. The symmetrical shelf is subjected to a uniform load of 4 kPa. Support is provided by a bolt…

A: Symmetrical shelf subjected to uniform load, w = 4 kPa

Q: Using = 0 analysis and assuming planar failure as shown, the minimum factor of safety against shear…

Q: want that drawing on AutoCAD step by step picture in a hurry

A: (1) Draw below drawings in top view page using the given co-ordinates (2) Move to isometric page…

Q: 3. A spherical pressure vessel has a D (mm) inner radius and thickness of 45mm. It is constructed by…

Q: crete tank shown in Figure 4 is 80% full of water with 340 mm wall and floor eight of the concrete…

A: Given:- 80% full of water 340mm wall height =3m D=4m To find:- Volume of concrete tank Concentrated…

Q: A portion of a four-lane multilane highway with a full median carries 2,600 vehicles per hour during…

A: To convert the peak hour demand volume to an equivalent flow rate

Q: 5. A sample of soil is 5 cm high and 8 cm in diameter. It was tested in a constant head permeameter.…

Q: Given a cantilever beam of length L=2.8meters. The left support “A” is free while the right end “B”…

A: Given data in question Load 54 kN Span 2.8 m Cantilever beam EI = 19000 kN-m2 To find out 1st…

Q: 1. For the beams described below, determine the nominal capacity QMn Assume fc = 4ksi fy = 60ksi…

A: f'c=4 ksi fy = 60 ksi clear cover =2 in ρmin = 0.0033 ρmax = 0.01806

Q: Given a cantilever beam of length L=2.1meters. The left support “A” is free while the right end “B”…

A: EI = 19000 KN-m2 Determine the slope at free end (in degree) using Double Integration Method. (3…

Q: PROBLEM A truck with axle loads shown rolls across a 10-m span. Compute the maximum bending moment…

Q: Plot the Mn versus Lb graph for W30x116 beam for Cb Cb = 2.0. Assume the W shape is A992 steel, Gr.…

A: Section W30x116 Properties: A = 34.2 in2 ry = 2.19 in Sx = 329 in3 J = 6.43 in4 rts = 2.7 in ho =…

Q: : For the short column whose cross-section shown in Fig. (1), calculate: The compressive force (P)…

A: We are given strain in middle layer steel = 0.001 We know that strain in extreme concrete fibre =…

Q: A rectangular beam has a width of 300 mm and effective depth of 600 mm. The beam is reinforced with…

A: Width of the beam (b)= 300mm effective depth of beam (d)= 600mm tension reinforcement area (Ast) =…

Q: 4. A frame consists of four light, elastic vertical members and two rigid horizontal members, as…

A: m1=1350 kgm2=900kgnatural frequencies =4.91Hz and 12.05 HzExpressions for displacments…

Q: Determine the force in each member of the loaded truss. The forces are positive if in tension,…

Q: 5. Find the allowable strength of the welded connection with a minimum throat size shown below. Base…

A: The thickness of the plate = 10 mm The yield strength of the base metal (Fy) = 275 N/mm2 The…

Q: 1) Determine the slope at B and the maximum displacement of the beam. E-29(10³) ksi, 1-500 in*. a)…

Q: Question 3: Use both of Arithmetic Mean and Thiessen Polygon Methods to calculate the areal rainfall…

Q: Problem 4-6: For beams and loads given, select stirrup spacings across the span if f'e = 3,500 = psi…

A: A cantilever beam is given, we need to find out the stirrups spacing

Q: Consider the beam shown in (Figure 1). Take P = 4 kip and w=1.9 kip/ft. Point E is just to the right…

A: As per the guidelines we need to answer only first 3 subparts of question so please repost rest…

Concept explainers

Design criteria for structural loading

The different loads such as loads due to self-weight (dead load) and external loads such as live load, wind loads, seismic load, snow load, and other loads and load combinations that influence the design of a building are called structural loading. The nature of the applied load differs from changes in the location, design, and type of materials used. The design criteria require that structures must be designed and constructed to be able to withstand all load types that are expected to act upon the structure and render its usage for the designated purpose. The structural members such as beams, slabs, columns, and foundations help the structure to withstand the applied load. There are different institutes such as ASCE and ACI that provide building design codes to assure minimum safety requirements and quality of the structures.

Question

need fast and comp, pls

A rectangular beam having a width of 300 mm has an effective depth of 600 mm. Total
depth of the beam is 680 mm. The beam is reinforced with 3-32mm at the bottom. Use
f'c-28 MPa and fy=415 MPa.
a) Using detailed calculation, determine the shear strength provided by the concrete if it
is subjected to a factored moment of Mu=134 kN-m which occurs simultaneously with
Vu=223 kN.
b) Using simplified calculation, determine the shear strength provided by the concrete if
it is subjected to a compressive force of 268 KN.
c) Using detailed calculation, determine the shear strength provided by the concrete if it
is subjected to compressive force of 270 kN, Mu-140 kN-m and Vu=240 kN.
d) Using detailed calculation, determine the shear strength provided by the concrete if it
is subjected to tensile force of 245 KN, Mu-140 kN-m and Vu=240 kN.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1: Given:

Step 2: Solution:

Step 3: Check

Step 4: Continuing

Step 5: Continuing

Step 6: Continuing

Solution

Step by step

Solved in 7 steps

SEE SOLUTION Check out a sample Q&A here

Follow-up Questions

Read through expert solutions to related follow-up questions below.

Follow-up Question

can you answer c and d?

Solution

by Bartleby Expert

SEE SOLUTION

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

2.From the figure below; bending moment of 8 KN-m. The normal weight of concrete has an fc' of 26.4 MPa. solve and show the complete solution and pick the correct ans
1.From the figure below; bending moment of 8 KN-m. The normal weight of concrete has an fc' of 26.4 MPa. solve and show the solution
USE NSCP 2010 A reinforced rectangular concrete beam has a width of 250 mm and aneffective depth of 360 mm. It is reinforced for tension only at the bottomwith a total tension steel area of 600 mm². fc’ = 40 MPa, fy = 400 MPa. a. Determine the tension reinforcement index for this beam.b. Determine the distance of the neutral axis below the compressionsurface. c. Determine the ultimate flexural strength of the beam.
A singly reinforced rectangular concrete beam has a width of 150 mm and an effective depth of 330 mm. The characteristic compressive strength of concrete is 20 MPa and the tensile strength of steel is 415 MPa. Adopt the stress block for concrete as per IS 456-2000 and take the limiting value of depth of neutral axis as 0.48 times the effective depth of the beam for considering as a balanced section. What is the likely approximation for the limiting value of the moment of resistance of the beam?
3.) A reinforced concrete beam 300 mm width has an effective depth of 450 mm. it is reinforced with 6-32mmØ at the tension side and 2-28 mmØ at the compression side located at 65 mm from the top. f= 34.5 MPa and fy 345 MPa. Assume all steel yield and the contribution of compression steel may not be neglected. (NSCP 2001) a. Find the balanced steel ratio in percent? = b. Find the depth of compression stress block. c. Find the nominal moment capacity of the beam.
The maximum compressive stress in a beam is 6 MPa. The depth of neutral axis of the beam is 60 mm and the compressive strength of the concrete used is 30 N/mm2. Determine the effective curvature of the beam.
The properties of the reinforced concrete T-beam are bi = 30 in., hi = 4 in., b2 = 12 in., h = 18 in., Ast = 4.5 in?, and n=8. Using elastic analysis, find the maximum stress in the concrete produced by an 80-kip-ft bending moment. h1 h2 A« (total area) 10,606.391 psi O 343.813 psi O 543.318 psi 687.954 psi
A rectangular beam has a width of 285 mm and an effective depth of 520mm. It is reinforced with 4 – 36 mm ø bars having fy = 430 MPa. If he compressivestrength of the concrete is 28MPa, find the following a. Location of the neutral axis from the top of the beam.b. Stress of the steel.c. Ultimate capacity of the beam?
In all Questions use the Working Stress Method and the flowing material 25 MPa and f, = 420 MPa. properties f = If the stress in the top fiber of the concrete is f = 12.5MPa and in the steel is 400 MPa. Ec 25000 MPa, Es 200000 MPa. Determine the following: 1-Maximum strain in concrete 2- Maximum strain in steel and 3- Flexural strength of the section (the moment M) P 500 mm 300 mm
The total compressive force at the time of failure of a concrete beam section of width 'b' without considering the partial safety factor of the material is (a) 0.36 fok b Xu (c) 0.66 fok b Xu (b) 0.54 f b Xu (d) 0.8 f b X, ck where X, is the depth of neutral axis, f cube strength of concrete. ck
A beam having a width of 500 mm and a total depth of 800mm is reinforced with 6-32mm dia bars, Compressive strength of concrete is 28 MPa and yield strength of reinforcing bars is 420MP.. 640 mm 800 mm 6 #32 80 mm 80 mm Determine the following: 1. depth of the compression block 2. strain in the tension reinforcement 3. moment reduction factor 4. nominal moment capacity 5. ultimate moment capacity 6. actual steel ratio 7. minimum steel ratio 8. maximum steel ratio 9. Tension force 10. Compression force
Question A pre-stressed concrete beam has a width of 200 mm and an overall depth of 400 mm. The permissible stresses in tension and compression due to pre- stressing alone are 4 N/mm and 25 N/mm respectively. Find the required pre- stressing force in the tendon and the eccentricity of the tendon, if a straight tendon with a constant eccentricity is to be provided in the beam. No external load or self weight effect is to be considered.