A pump draws water (SG=0.998) from reservoir A and transports it to reservoir B, with a static suction head of 8 m and a static discharge head of 28 m. The diameter of the suction pipe is 15.24 cm and the diameter of the discharge pipe is 4 inches. The total head loss from A to be is 25% of the total dynamic head (TDH) and the head loss at the discharge line is 90% of the total head loss. If the pump capacity is 60 Ips, determine the following: a. Pump brake power if the efficiency is 82% b. Reading of the pressure gauge installed at the suction flange of the pump. c. Reading of the pressure gauge installed at the discharge of the pump.

A pump draws water (SG=0.998) from reservoir A and transports it to reservoir B, with a static suction head of 8 m and a static discharge head of 28 m. The diameter of the suction pipe is 15.24 cm and the diameter of the discharge pipe is 4 inches. The total head loss from A to be is 25% of the total dynamic head (TDH) and the head loss at the discharge line is 90% of the total head loss. If the pump capacity is 60 Ips, determine the following: a. Pump brake power if the efficiency is 82% b. Reading of the pressure gauge installed at the suction flange of the pump. c. Reading of the pressure gauge installed at the discharge of the pump.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Q.2 A centrifugal pump is required to pump water to an open water tank situated 4 km away from the location of the pump through a pipe f diameter 0.2 m having Darcy's frřiction factor of 0.01. The average speed of waterinthe pipe is 2 m/s. If it is to maintain a constant heac of 5 m in the tank, neglecting other minor losses, the absolute discharge pressure at the pump exit is (a) 0.449 bar (c) 44.911 bar dund (b) 5.503 bar (d) 55.203 bar
The suction water level of a reservoir A is 5m above pump centerline and discharge water level is 50m above pump centerline. The discharge is 2m with suction pipe of 100mm diameter and 90mm diameter discharge pipe. The total head loss is 50% of the velocity head a suction pipe. If pump runs at 360rpm, find the torque developed by the shaft of motor if pump efficiency is 76%. ANSWER: 5.4 KN-m
The suction diameter of 60 mm reads 2 psi vacuum and 50 mm diameter discharge with 250 kpag. The suction water level is 5 m above water pump centerline with friction head loss of 0.5 m at suction pipes and discharge water level is 25 m above water pump centerline and head los at discharge pipe is 3 m. If discharge is 0.01 m^3/s, find the horsepower needed to pump the water for 70 percent pump efficiency.
The suction diameter of 60 mm reads 2 psi vaccum and 50 mm diameter discharge with 250kpag. The suction water level is 5 m above water pump centerline and discharge water levelis 25 m above water pump centerline and discharge is 2 m. If discharge is 0.01 m^3/s, findthe horsepower needed to pump the water for 80 percent pump efficiency.
A centrifugal pump works against 10 m at 1000 rpm. The varies are curved back at an angle of 30° to the tangent at the outer periphery. The impeller diameter is 30 cm and has width 5 cm at outlet. Determine the discharge if Manometric efficiency is 95%, also determine power required to operate the pump if the overall efficiency is 65%.
Q2/ A pump delivers water from a tank A (water surface elevation = 110 m) to tank B (water surface elevation = 170 m) as shown in figure below. The suction pipe is 45 m long ( = 0.024) and 35 cm in diameter. The delivery pipe is 950 m long (f = 0.022) and 25 cm in diameter. The head discharge relationship for the pump is given by H, = (90 – 8000 Q*), where H, in m and Q in m³/s. Calculate the discharge in the pipeline and the power delivered by the pump. Delivery pipe. elevation 170 m Suction pipe, elevation- 110 m Good Luck Rasha H. Salman
A Pelton wheel develops 750 kW under ahead of 200 m. Its nozzle has a diameter of 10 cm and losses in the pipeline due to friction amount to 90 Qʻ, where Q is discharge in cubic meters per second. Assuming the gross head and efficiency of the wheel to be constant and Cy for the nozzle as 0.98. Find the discharge and overall efficiency. If the power developed is reduced to 650 kW by (i) Operating the needle in the nozzle and
The head-discharge characteristic relationship of a pump is given by:H = 40 - 200*Q^2, where H is the total head generated by the pump in meters and Q is the discharge in m^3/s. The pump lifts water through a pipe 0.3 meter diameter over a distance of 1000 meters against a static lift of 25 meters. Find the operating/ duty point (H and Q) if the friction coefficient of the pipe 'f ' is 0.03.
A pump draws water from an 8 in. suction pipe and discharges through a 6 in. pipe in which the velocity is 12 fps. The pressure is –5 psi at point 1 in the suction. The 6 in. pipe discharges horizontally into the air. The power delivered to the pump is 30hp whose efficiency is 70. Determine: a. the water horsepower 21 18 15 b. the total dynamic head in feet 94.316 78.564 67.369 c. To what height h in feet above the suction gage can the water be raised? 81.716 65.498 54.303 please answer immediately thankyou
The suction water level of a reservoir is 5 m above pump centerline and the discharge water level is 50 m above pump centerline. The discharge is 0.2 m^3/s with suction pipe of 100 mm diameter and 90 mm diameter discharge pipe. The total head loss is 50% of the velocity head at suction pipe. If pump runs at 360 rpm, find the torque (in kN-m) developed by the shaft of the motor if pump efficiency is 76%.
PROBLEM 2 A centrifugal pump discharges 0.15m3/s of water against a head of 15 m. The impeller has outer and inner diameter of 35 and 15 cm, respectively The outlet vanes are set back at an angle 40 deg. The area of flow is constant from inlet to outlet and is 0.06m2. If the speed of the pump is 960 rpm. Take slip factor = 1. Calculate the manometric efficiency, and A 45.9% B. 57 3% c 60.7% D 39 3% vane angle at inlet, A 11 deg B 17 deg C.15 deg D 18 deg
The below figure shows a pump that transfers a steady stream of 35◦API crude oil from an oiltanker to a refinery storage tank, both free surfaces being open to the atmosphere. Theeffective length—including fittings—of the commercial steel pipe is 6,000 ft. The dischargeat point 4 is 200 ft above the pump exit, which is level with the free surface of oil in thetanker. However, because of an intervening hill, point 3 is at a higher altitude than point 4.Losses between points 1 and 2 may be ignored.The crude oil has the following properties:Density ρ = 53 lbm/ft 3 ; Viscosity μ = 13.2 cP; Vapour Pressure Pv = 4.0 psia Answer the following questions:1. If the combination of pump and motor is 80% efficient, how much electrical power(kW) is needed to drive the pump?2. If, in order to avoid vapour lock, the pressure in the pipeline must always be above thevapor pressure of the crude oil, what is the maximum permissible elevation of point 3relative to point 4?3. If the flow in the pipeline…