a Pin TAB daB tBc dạc А C a d, TAB tBC dAB dạc Section a-a
Two steel tubes are joined at B by four pins (d p =11mm), as shown in the cross section a–a in the figure. The outer diameters of the tubes are
dAB = 41mm and dBC = 28 mm. The wall thickness are tAB 5 6.5 mm and tBC = 7.5 mm. The yield stress in tension for the steel is σY = 200 MPa and the ultimate stress in tension is σU =340 MPa. The corresponding
yield and ultimate values in shear for the pin are 80 MPa and 140 MPa, respectively. Finally, the yield and ultimate values in bearing between the pins and the tubes are 260 MPa and 450 MPa, respectively. Assume that the factors of safety with respect to yield stress and ultimate stress are 3.5 and 4.5, respectively.
(a) Calculate the allowable tensile force Pallow considering tension in the tubes.
(b) Recompute Pallow for shear in the pins.
(c) Finally, recompute Pallow for bearing between the pin and the tubes. Which is the controlling value of P?
Step by step
Solved in 2 steps with 1 images
