A mass m₁ = 2.0 kg is suspended over a pulley of moment of inertia, I₁ = 0.010 kg-m², and a radius, R₁ = 0.10 m, and is attached with a massless rope to a mass on a horizontal table, m₂ = 2.0 kg. This mass is itself attached to another suspended mass m₂ = 4.0 kg again with a massless rope over a pulley of moment of inertia, I₂ = 0.040 kg-m², and a radius, R₂ = 0.20 m. (a) Find the velocity of each mass when my falls a distance of 1.00 m (the masses start at rest). (b) There is now friction on the horizontal table, μ = 0.74. Again find the velocity of each mass when my falls a distance of 1.00 m (the masses still start at rest).

A mass m₁ = 2.0 kg is suspended over a pulley of moment of inertia, I₁ = 0.010 kg-m², and a radius, R₁ = 0.10 m, and is attached with a massless rope to a mass on a horizontal table, m₂ = 2.0 kg. This mass is itself attached to another suspended mass m₂ = 4.0 kg again with a massless rope over a pulley of moment of inertia, I₂ = 0.040 kg-m², and a radius, R₂ = 0.20 m. (a) Find the velocity of each mass when my falls a distance of 1.00 m (the masses start at rest). (b) There is now friction on the horizontal table, μ = 0.74. Again find the velocity of each mass when my falls a distance of 1.00 m (the masses still start at rest).

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A student sits on a freely rotating stool holding two dumbbells, each of mass 2.97 kg (see figure below). When his arms are extended horizontally (Figure a), the dumbbells are 1.09 m from the axis of rotation and the student rotates with an angular speed of 0.749 rad/s. The moment of inertia of the student plus stool is 2.57 kg. m² and is assumed to be constant. The student pulls the dumbbells inward horizontally to a position 0.305 m from the rotation axis (Figure b). Wf Wi a 30€ 30€ = b (a) Find the new angular speed of the student. rad/s (b) Find the kinetic energy of the rotating system before and after he pulls the dumbbells inward. K before J J after
A solid disc with radius R is connected to spring at point (d) distance above the center of disc. The other end of the spring is fixed to the vertical wall. The disc is free to roll without slipping on the ground. The mass of disc is (M) and the spring constant is (K). The polar moment of inertia for disc about its center is J = 1/2MR2 , so the natural frequancy for the system is 1 2K(R+d)² MR2 the Answer is O 1 2K 2п 3M
Two uniform bars AB and BC are pin-connected at points A, B, and C. Bar AB is massless (mAB = 0 kg) and has a length L = 1.5 m. Bar BC has a mass mBc = 2 kg and a length H = 1 m. C is a fixed point, a distance 8 = 0.2 m above the ground. A is on a uniform wheel of radius R = 0.8 m, a distance p from the center of the wheel. Note that p is less than R (R+ p = 8 + H). The mass of the wheel is mwheel = 6 kg. At the instant shown, AB is horizontal, BC is vertical and point A is at the vertical of point O. Bar BC is rotating clockwise at 3 rad/s with an acceleration of 1.5 rad/s² also in the clockwise direction. Assume that the wheel rolls without slipping. a) Find the force P applied to the wheel at that instant. b) Find the minimum coefficient of static friction required for the wheel to roll without slipping. L B H
A solid homogeneous cylinder with diameterd = 340 mm rolls without slipping on the horizontal plane. The cylinder has a mass of 30 kg and is at rest in the position shown in the Figure Q2.1 below. The stiffness of the spring is 350 N/m and its unstretched length is 600 mm. k = 350 N/m d = 340 mm 500 mm 1200 mm Figure Q2.1 (a) Calculate the moment of inertia, I, of the cylinder about the axis into the page at the centre of mass of the cylinder. (b) Calculate the potential energy stored in the spring for the initial case when the system is at rest (Ep1). (c) The cylinder then rolls to a position 400 mm to the right, calculate the potential energy stored in the spring for this final case (Ep2).
Three bodies are fixed on a shaft rotating at 500 rpm. The mass of the bodies are 3.5 kg, 2.5 kg and 2 kg. The radii of rotation can be taken as 60 cm, 40 cm and 25 cm. If a balancing body of 1.5 kg is to be placed, then find the unbalance in the system. The first body can be assumed to be at 45° from positive x axis, second body is at 90° from first body and third body is at 180° from positive x-axis. All the angles are measured in anti-clockwise direction.
A 5kg lacrosse stick has a moment of inertia about a transverse axis through its center of gravity of 8 kg.m2. When a player swings the stick at an opponent, the axis of rotation is through the end of stick, 80 cm from the center of gravity of the stick. What is the moment of inertia relative to this swing axis? A 4 kg lacrosse stick has a radius of gyration of 60cm about a transverse axis through its center of gravity. When a player swings the stick at an opponent, the axis of rotation is through the end of stick, 120cm from the center of gravity of the stick. What is the moment of inertia relative to this swing axis?
R - m 130° A hollow wheel of mass given by m 50 kg rolls down an incline of 30° without slipping. The inner radius of the wheel is given by R = 50 mm and its thickness is given by d = 5 mm. Gravity acts down. (a) Show that the moment of inertia of the wheel is given by Ī = 138 125 kg mm². (b) Show that the linear acceleration of the wheel's centre of gravity ā is related to the angular acceleration of the wheel a via a (55 mm)a. = (c) Analyse an appropriate free-body diagram to determine the linear acceleration of the wheel's centre of gravity ā.
A window cleaner is pulling himself up to a pulley that consists of two disks welded together as shown. The person is currently pulling straight down on the rope in his hands with a force of magnitude 580.4 N. The other rope is also vertical and is attached to the person's center of mass. The person's mass is 74.2 kg, the pulley's total moment of inertia is 395 kgm2, the radius of the small disk is 0.39 m, and the radius of the big disk is 0.73 m.What is the magnitude of the acceleration of the person's center of mass?
2. Determine the number of degrees of freedom necessary for the analysis of the system shown in the figure below. 0.1L 0.4L+ 0.3LS-+ 0.2L 2k G 2k Slender rod of mass m m2 moment of inertia I
Consider the system shown in the following figure, which is pivoted at point O. Suppose the system is moving in a horizontal plane. Assume that a0.4 m,b-1m M=2 kg the mass of the bar m 4 kg. k10 N/m, c 93 kg/s and F(t)= F6 (t) N where F = 3Ns Assume zero initial conditions and the moment of inertia of the bar about point O to be Determine the mnaximum tip response amplitude in mm. ww- Rigid bar M F() 6154 mm 13.90 mm 8.93 mm 83.37 mm 19.85 mm O00 00
A shaft caries four rotating masses A, B, C and D which are completely balanced. The masses B, C and Dare 50kg, 80kg and 70kg respectively. The masses C and D make angles of 90° and 195° respectively with mass B in the same sense. The masses A, B, C and D are concentrated at radius 75mm,100mm,50mm and 90mmrespectively.The plane of rotation of masses B and C are 250mm apart. Determine the magnitude of mass A and its angular position the position of planes A and D.
A uniform rod of mass M = 2.3 kg and length L = 0.2 m, lying on a frictionless horizontal plane, is free to pivot about a vertical axis through one end, as shown. The moment of inertia of the rod about this axis is given by 1/3 ML2. If a force F = 7 N, q = 47° acts as shown, what is the resulting angular acceleration (in rad/s2) about the pivot point?