A gas (ρ = 0.07088lbm/ft3, μ = 0.04615 lbm/ft-hr) is to be transported through a 550 ft long circular cast iron pipe at a rate of 14ft3/s. If the head loss must not exceed 60ft, determine the velocity of flow, Reynolds Number and Darcy-Weisbach Friction Factor, mass flowrate and minimum required diameter of the pipe

Q: Glycerin at 40°C is flowing through a 4-cm-diameter horizontal smooth pipe with a flow rate of 6…

A: Now we Reynolds number Re=ρVDhμρ=Density of the fluidDh=Diameter of the pipeV=Flow rate μ=Dynamic…

Q: Water is pumped through a horizontal, smooth circular pipe at a bulk velocity of 0.4 m/s. The pipe…

A:

Q: A reservoir at 300 ft elevation has a 6-in.-diameter discharge pipe located 50 ft below the surface.…

A: Given: elevation of the reservoir→Z1=300 ft And elevation of the outgoing flow →Z2=150 ft Diameter…

Q: 1. Water flows at a rate of 65 Li/min in a steel pipe of 45 mm diameter, K = 0.045x10 3 m, u = 0.001…

A: Note: Since you have asked multiple questions, we will solve the first question for you. If you want…

Q: Glycerin at 20 °C flows upward in a vertical 75-mm-diameter pipe with a centerline velocity of 2.0…

A:

Q: large buildings, hot water from the water tank is continously recurculated in a loop to avoid long…

A:

Q: Oil ( μ = 0.478 Pa.s and ν = 5.3 *10-4 m2/s ) flows downward in a pipe which is ( 3 cm ) in diameter…

A:

Q: Oil being used as a coupling agent with a density of 892 kg/m³ is flowing through the piping…

A:

Q: Water at 59 F flows through a straight section of a 6-in-ID cast-iron pipe with an average velocity…

A: Given dataT=59FV=4 ft/sg=32.2 lb.ft/s2ρ=62.3 lb/ft3y1-y2=2ft

Q: oss in turbulent flow in a pipe (a) varies directly as velocity  (b) varies inversely as square of…

A:

Q: A pitot tube with diameter of 3 cm is installed in a pipe with ID 150 mm. Water flows through the…

A:

Q: Water is conveyed from a constant head tank (head or operation is 4 m) through a 100 m long…

A: To Find: Loss coefficient for value i.e. K Given that, H=4 m, L=100 m, d=100 mm=0.1 m Q=12…

Q: First find the friction factor then Apply the formula.

A:

Q: Consider the flow of oil with p = 870 kg/m² and u = 1.03 kg/m-s in a 3-cm-diameter, 1.5-m-long…

A: Given data:  density, ρ=870 kg/m3 dynamic viscosity, μ=1.03 kg/m-s diameter, d = 3 m = 0.03 m…

Q: water at 4-degree centigrade ( ρ=998 kg/m3 and μ=1.52 *10-3pa.s) is flowing steadily through a 3mm…

A: Given data:

Q: Determine the head loss in a pipeline with friction factor of 0.01, length of 0.8 km, diameter of…

A: Given data: friction factor (f) = 0.01 Length (L) = 0.8 km Diameter (D) = 0.9 m Speed (V) = 8 m/s

Q: Low flow occurs in a pipe with Reynolds number equal to 1,450. Determine the friction factor for…

A:

Q: A 230-m-long pipeline delivers 20°C water to a storage reservoir located downstream. The pipeline is…

A:

Q: A pitot-static tube with an instrument coefficient of 0.94 is used to  determine the air velocity in…

A: To find: The air velocity. Given: The instrument constant is Cd=0.94. The density of the air is…

Q: here are two fully open gate valves (KV= 2 m) and three 90° elbows (K90°= 2.2 m) on the horizontal 4…

A:

Q: Water is pumped from the river through a 45-mm-diameter hose having a length of 2.5 m. The friction…

A:

Q: Oil (ρ=1100 kg/m³,u = 5.6 X 10-4 kg/m s) flows through a 4.3 cm diameter pipe. The flow rate needs…

A: Given data:-density of oil, ρo=1100kg/m3dynamic viscosity of oil, μ=5.6×10-4kg/m-sdiameter of pipe,…

Q: If the Darcy Weisbach friction factor for a fluid flow through a pipeline is calculated as 0.016,…

A: Given data, Fd = 0.016 Find Ff = ?

Q: Water is flowing through the 40 mm pipe shown below at 250 L/min. The pressure at point 1 is 5322…

A: Given:d=40 mmQ=250L/min P1=5322 KPaP2=4358 KPaP1'=5081 KPaP2'=1222 KPa

Q: (a) Prove that the loss of pressure head for the viscous flow through a circular pipe is given by…

A:

Q: The oil whose temperature is constant at 20 ° C (ρ = 886 kg / m3, μ = 0.805 kg / m / s) flows…

A:

Q: A venturi meter is introduced in a 300 mm diameter horizontal pipeline carrying a liquid under a…

A: Given data: D=300 mmd=100 mmP=150 kPaHead loss=3% of differential pressure headhloss=-400 mm Need to…

Q: What does "viscous flow" mean, and what does "head loss through friction" mean? Describe the…

A: Viscous flow refers to the flow of fluids in which there is a resistance to motion due to the…

Q: Oil (with kinematic viscosity ν = 4x10-5 m2/s and specification SG= 0.9) flows from the upper…

A: Introduction: When fluid flows from one location to another, the head lossless comes into play. The…

Q: (3) In the figure below, the pipe entrance is sharp-edged. Consider the flow rate Q to be 0.004…

A:

Q: Water is conveyed from a constant head tank (head of operation is 4 m) through a 100 m long…

A: Given data as per the question Length of pipe =100 m diameter of pipe =100 mm Flow rate =12 lps f…

Q: Water at 10 C flows in a 1.25-cm-diameter pipe at a rate of 1.33 L/min. The hydrodynamic entry…

A:

Q: For the same velocity, the entrance loss is of exit loss in the constant diameter pipe O 0.5 times O…

A:

Q: Kerosene at T = 20°C flows through the 100-mm-diameter commercial steel pipe at 22.5 kg/s. Use the…

A: D=100mm=0.1m L=50m m=22.5kg/s   We need to find PA-PB

Q: Oil whose temperature is constant at 20 ° C (ρ = 886 kg / m3, μ = 0.805 kg / m / s) It flows…

A: GivenT=20°Cρ=886kg/m3μ=0.805kg/m/sPi=720KpaL=40mP0=101Kpa

Q: It can be shown that for fully-developed pipe flow dP/dz is a constant. Derive an expression for…

A: Draw a diagram for fully developed pipe flow and take a small strip for analysis.

Q: Determine (a) the head loss, (b) the pressure drop, and (c) the pumping power for water flowing…

A:

Q: Straight 0.15 m diameter cast iron pipe with equivalent roughness E=0.22 mm is used for water…

A: The relative roughness of a pipe is its roughness divided by its internal diameter, or e/D, and this…

Q: Water at 20°C flows in a 100-mm-diameter new cast iron pipe with a velocity of 5.0 m/s. Determine…

A:

Q: Q=2000J Tout=? V(m/s) D=0.1m 介1111 air Air at (3.05x10^2) K is entering in a circular pipe at 101325…

A: Given information  Temperature at the pipe entrance = T1 = 305 KPressure at the pipe entrance = P1 =…