A cylindrical rod with a length of 380 mm and a diameter of 10 mm is to be subjected to a tensile load. The rod mus not experience plastic deformation or an increase in the length of more than 0.9 mm when a load of 24.5 kN is applied. Which of the four materials listed in the table below are possible candidates? Justify your answer.

A 5ft long rod with a 0.63 inch diameter is subjected to a 10,661lb tensile load. What is the tensile stress in ksi? Answer to two decimal places.

Kindly give me right solution. Don't copy from other experts solution.

A 3003-H14 aluminum alloy rod with 0.5 in. diameter is subjected to a 2000- lb tensile load. Calculate the resulting diameter of the rod. If the rod is sub- jected to a compressive load of 2000 lb, what will be the diameter of the rod? Assume that the modulus of elasticity is 10,000 ksi, Poisson’s ratio is 0.33, and the yield strength is 21 ksi.

A steel bar with a length of 3 m, diameter of 25 mm, modulus of elasticity of 207 GPa, and linear coefficient of thermal expansion of 0.000009 m/m/°C is fixed at both ends when the ambient temperature is 40°C. If the ambient temperature is decreased to 15°C, what internal stress will develop due to this temperature change? Is this stress tension or compression? Why?

A cylindrical rod with a length of 380 mm and a diameter of 10 mm is to be subjected to a tensile load. The rod must not experience plastic deformation or an increase in length of more than 0.9 mm when a load of 24.5 kN is applied. Which of the four materials listed in table are possible candidates? Justify your answer. Material Elastic Modulus, GPa Yield Strength, MPa Tensile Strength, MPa 110 ETT 70 207 101 Copper Aluminum alloy Steel Brass alloy 248 255 448 345 289 420 551 420 * Plastic deformation is defined as a process in which the object due to applied force changes its size or shape in a way that is not reversible

A cylindrical rod 600 mm long and having a diameter 13.2 mm is to be subjected to a tensile load. If the rod is to experience neither plastic deformation nor an elongation of more than 1.4 mm when the applied load is 30 KN. Which of the four metals or alloys listed below are possible candidates. Justify the answer with calculations Material modulus of elasticity(gpa) yield strength(mpa) tensile strength(mpa) Aluminium alloy 70 255 420 Brass alloy 100 345 420 Copper  110 210 275 Steel alloy 207 450 550

Don't use Ai to answer. Provide Handwritten work ,The answer must be accurate.