A cylindrical component 0.3 m long is solid for 1/3 of its length and hollow with inner diameter ½ the outer diameter for the rest of the length. At 300C a gap of 0.1 mm exists between the component and the rigid supports. The outer diameter is 60 mm and the stress is not to exceed 150 MN/m2. Determine the maximum temperature that will not cause failure of the component. Take α as 1.3x10-5/0c and E as 200 GN/m2

A cylindrical component 0.3 m long is solid for 1/3 of its length and hollow with inner diameter ½ the outer diameter for the rest of the length. At 300C a gap of 0.1 mm exists between the component and the rigid supports. The outer diameter is 60 mm and the stress is not to exceed 150 MN/m2. Determine the maximum temperature that will not cause failure of the component. Take α as 1.3x10-5/0c and E as 200 GN/m2

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter7: Analysis Of Stress And Strain

Section: Chapter Questions

Problem 7.6.13P: A solid spherical ball of magnesium alloy (E = 6.5 × l0-6 psi, v = 0.35) is lowered into the ocean...

See similar textbooks

Similar questions

A rod is 3m long at a temperature of 15°C. Find the expansion of the rod, when the temperature is raised to 95°C. If this expansion is prevented, find the stress induced in the material of the rod. Take E=1x10° N/mm? and a=0.000012/"C.
A steel rod of 20 mm diameter passes centrally through a copper tube 40 mm external diameter and 30 mm internal diameter. The tube is closed at each end by rigid plates of negligible thickness. The nuts are tightened lightly home on the projected parts of the rod. If the temperature of the assembly is raised by 60°C, calculate the stresses developed in copper and steel. Take E for steel and copper as 200 GN/m2 and 100 GN/m2 and α for steel and copper as 12 x 10-6 per °C and 18 x 10-6 per °C.
The horizontal steel rod, 2.5 m long and 1200 mm2 in crosssectional area, is secured between two walls as. If the rod is stress-free at 20_C, compute the stress when the temperature has dropped to _20_C. Assume that (1) the walls do not move and (2) the walls move together a distance Δ = 0.5 mm. Use α = 11.7x10-6 oC and E = 200 GPa.
By the equipment as shown in the figure, temperature can be measured. The bar AB and CD are made from aluminum and titanium. The coefficients of thermal expansion are 23.6x106 1/K and 8.2x10-6 1/k. Obtain the relationship between the temperature and the vertical displacement at the point E. 6 mm 72 mm 36 mm D
Four steel bars jointly support a mass of 25 x 103 kg. Initially the temperature is 250C. Bars A and D have a cross-sectional area of 480 mm2. For bars B and C, the cross-sectional area is 360 mm2. Determine the elongation of bar A when the temperature becomes 600C. Also, find the axial stress developed in bar C. Use E = 200 GPa and α = 11.7 x 10-6 m/ (m0C). (Please provide detailed solution with FBD thank you) δA = ? mm σC = ? MPa
A compound bar is formed from copper rod of diameter 30 mm and a coaxialsteel tube of cross-sectional area 1500 mm2 which are firmly attached at their ends.Determine the stress in the copper and in the steel when the temperature of thebar is dropped by 40°C and a compressive force of 100 kN is applied.For copper, E = 100 GN/m2 with α = 16.5 x10-6per ⁰C.For steel, E = 200 GN/m2 with α = 11 x10-6per ⁰C
A copper rod with 0.15 cm diameter is enclosed by a steel tube that has an outside diameter of 0.3 cm and an internal diameter of 0.2 cm. The assembly is fixed at each end. Determine the stresses in the rod and tube if the temperature is at 220oC; at 10oC, there is no longitudinal stress. Based on laboratory results for steel, E = 2.1 x 105 N/mm2, a = 11x10-6/oC, and for copper, E = 1 x 105 N/mm2, a = 18x10-6/oC
A 5-m rod having a uniform cross-sectional area of 1000 sq. mm. is secured between two walls5 meters apart. The load on the rod is zero at 27 °C. E = 200 GPa, α = 11.25x10-6 m/m-°C. Whenthe temperature rises to 57°C: What is the stress in the rod assuming that the walls are rigid and stress (in the rod) if the walls spring together with a total distance of 0.5 mm? pls box final answer
A 5-m rod having a uniform cross-sectional area of 1000 sq.mm. is secured between two walls 5 meters apart. The load on the rod is zero at 27 °C. E = 200 GPa, α = 11.25x10-6 m/m-°C. When the temperature rises to 57°C: What is the stress in the rod if the walls spring together a total distance of 0.5 mm
Using 2 of the 3 given equations: σ = F/A ε = δ/L σ = E * ε calculate the original length, in mm, of a circular tube that experience a compression stress of 80 MPa . The deformation of the tube is 0.684 mm and E = 70 000 MPa. Make sure to write which equations of the three above you used.
A steel rod of cross-sectional area of 600 mm2 and coaxial copper tube of cross sectional area of 1000 mm2 are firmly attached at their ends to form a compound bar Determine the stress in the steel and in the copper when the temperature of the bar is raised by 80°C and an axial tensile force of 60 kN is applied. For steel, E=200 GN/m? with x= 11 x 10-6 For copper, E=100 GN/m? with x= 16.5 x 10-6 per °C per °C
The steel plate shown below is put in into a rigid chamber, such that spacings of size s = 0.00188 m. To fit the plate, it is heated. It can be assumed that the plate can move frictionless along its edges. If x= 4m and y = 2 m, E = 200 GPa V = 0.28 a = 11.7 x 10 rC For which temperature increase along the y-axis is the upper spacing just closing in degree Select the correct response 97.055 57.091 114.183 71.554