A class of 10 students taking an exam has a power output per student of about 200 W. Assume the initial temperature of the room is 20°C and that its dimensions are 6.0 m by 15.0 m by 3.0 m. What is the temperature of the room at the end of 1.0 h if all the energy remains in the air in the room and none is added by an outside source? The specific heat of air is 837 J/kg · °C, and its density is about 1.3 × 10–3 g/cm3.

A class of 10 students taking an exam has a power output per student of about 200 W. Assume the initial temperature of the room is 20°C and that its dimensions are 6.0 m by 15.0 m by 3.0 m. What is the temperature of the room at the end of 1.0 h if all the energy remains in the air in the room and none is added by an outside source? The specific heat of air is 837 J/kg · °C, and its density is about 1.3 × 10–3 g/cm3.

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter21: Heat And The First Law Of Thermodynamics

Section: Chapter Questions

Problem 68PQ

See similar textbooks

Similar questions

A class of 10 students taking an exam has a power output per student of about 200 W. Assume the initial temperature of the room is 20°C and that its dimensions are 6.0 m by 15.0 m by 3.0 m. What is the temperature of the room at the end of 1.0 h if all the energy remains in the air in the room and none is added by an outside source? The specific heat of air is 837 J/kg . °C, and its density is about 1.3 x 10-3 g/cm3.
A class of 13 students taking an exam has a power output per student of about 200 W. Assume the initial temperature of the room is 20°C and that its dimensions are 7.0 m by 17.4 m by 3.0 m. What is the temperature of the room at the end of 1.0 h if all the energy remains in the air in the room and none is added by an outside source? The specific heat of air is 1.01 ✕ 103 J/kg · °C, and its density is about 1.2 10-3 g/cm3. C
A classroom has dimensions 8.00 m x 10.00 m x 3.00 m. A 1000 W electric space heater is being used to warm the room from 5.00°C to 20.00°C on a cold morning. If the density of air is 1.29 kg/m°, and the specific heat capacity of air is 1004 J/(kg-K), how long will it take to heat the room? Assume no loss of thermal energy to the surroundings. A) 1.30 minutes B) 241 minutes C) 45.3 minutes O D) 77.7 minutes
A 0.0800 kg sample of a gas is heated from 25 °C to 225 °C. During this process, 340 J of work is done by the gas and its internal energy increases by 9430 J. How much heat is transferred to the gas? Q = J What is the specific heat of the gas for this process? J/(kg · K) c =
The heat capacity of air at room temperature and pressure is approximately 21 J×mol-1×K-1. a) How much energy is required to raise the temperature of a room dimensions 5.5 m x 6.5 m x 3.0 m by 10°C from room temperature (298.15 K) assuming ideal behavior? b) How long will it take a heater rated at 1.5 kW to achieve that increase if 1 W = 1 J×s-1 (assuming no loss)?
A styrofoam container used as a picnic cooler contains a block of ice at 0°C. If 564 g of ice melts in 1 hour, how much heat energy per second is passing through the walls of the container? The heat of fusion of ice is 3.33 x 10° J/kg. Answer in units of W.
Consider a wood wall with a cross-sectional area of 40 m² and a thickness of 50 mm. The thermal conductivity of wood is 0.17 W/(m.K). If the temperatures of the inner wall and outer wall are 23°C and 14°C, respectively, determine the rate of heat transfer through the wall. Multiple Choice. 1224 W 1224 kW 1224 J
A sphere of surface area 1.25 m² and emissivity 1.0 is at a temperature of 100°C. At what rate does it radiate heat into empty space? (o = 5.67 × 10-8 W/m2.K4) O 3.7 W O 0.71 mW O 1.4 kW O 7.1 W O 9.9 mW
A raindrop strikes the ground with a speed of 6.1 m/s. The specific heat of water is 4.19 × 103 J/(kg⋅°C). What is the raindrop’s change in temperature after it strikes the ground, in degrees Celsius, assuming all its initial kinetic energy goes into heating it?
A solar panel receives energy from the Sun at a rate of 5.0 kW.Thermal energy is transferred from the solar panel to water with an efficiency of 20%.Coldwater of mass 15 kg enters the solar panel every hour.The specific heat capacity of water is 4200 J/(kg °C).Calculate the temperature increase of the water.
The walls of the storage room are 3 m high, 16 m wide, and 25 cm thick. The thermal conductivity is k = 0.85 W / (m ° C). During the day, the inner wall surface temperature is 22 ° C and the outer surface temperature is 4 ° C: a. Using the Thermal Resistance Concept, calculate the heat transfer resistance for the wall. = Answer ° C / watt. b. Calculate the rate of heat transfer through the wall at steady-state conditions. = Answerwatt
Thermal energy is being transferred through a 0.8 mm layer of human skin at a rate of 1.1 x 104 W/m2. The room temperature is 27 °C.To reduce heat flux, the skin is wrapped with a clothing material. What should be the thickness of the clothing material covering the surface of this skin tissue to reduce the heat flux to half of its original value? What is the temperature at the skin-clothing material interface? Note: if you think you need to have more information to solve this problem, you can make assumptions. Please state them clearly in your answer, if you need to make such assumptions.And please explain step by step to the answer to better understanding