A cantilever beam is free of support at point A and is clamped at the point B, as showi in the Figure Q4 below. Calculate the support reaction force and moment for the non- uniformly distributed load, where w = 64 N/m and L =6 m. The downward directio is denoted as positive direction in force and the anti-clockwise direction is defined as positve in moment. For all numerical answers, answer to within 3 decimal places.

A cantilever beam is free of support at point A and is clamped at the point B, as showi in the Figure Q4 below. Calculate the support reaction force and moment for the non- uniformly distributed load, where w = 64 N/m and L =6 m. The downward directio is denoted as positive direction in force and the anti-clockwise direction is defined as positve in moment. For all numerical answers, answer to within 3 decimal places.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter10: Statically Indeterminate Beams

Section: Chapter Questions

Problem 10.4.6P: A beam with a sliding support at B is loaded by a uniformly distributed load with intensity q. Use...

See similar textbooks

Similar questions

Use the diagram shown above. Given: • D₁ = 10 ft . • D₂ = 3 ft A #/ft . W = 100 W-100 Solve for the internal moment at X. D₂ D₁ W X Note: Enter your calculation results without the unit. You'll be asked to specify the unit for your calculation result in the following question. (e.g. if it's positive 100, enter 100, if it's negative 100, enter -100.)
RAY B F F₁ ROY
7. The beam AB in the figure below supports a load which varies from an intensity of 50 lb per ft to 200 lb per ft. Calculate the magnitude and position of the resultant load. Hint #1: To draw the resultant of a varying load, solve for the area of shape. The dimensions are the length of the beam and the load intensities. The unit of solved area is lb. Hint #2: Replace the given loading by a uniformly distributed load (rectangle) of 50 lb per ft plus a triangular load varying from zero at A to 150 lb per ft at B. 50 lb/ft -12- 200 lb/ft
Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Let a-9 ft, b-6 ft and w=10.5 kips/ft. Calculate the reaction forces Ay and Cy acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since A, -0, it has been omitted from the free-body diagram.) Answer: (a) Vi (b) V = i (c) V- a Answers: A, kips, Cy Determine the shear force acting at each of the following locations: (a) x = 0+ ft (i..., just to the right of support A) (b) x-9 ft (c)x=13ft When entering your answers, use the shear force sign convention. kips. kips. kips. b (a) M- (b) M- (c) M-i С Cy The shear-force diagram crosses the V = 0 axis between points A and B. Determine the location x where V = 0 kips. Answer:x-i ft. kip-ft. kip-ft. kip-ft. kips. Determine the maximum bending moment that acts anywhere in the beam. When entering your answer, use the bending moment sign convention.…
Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Let a = 5 m, b = 3 m, PB = 55 kN, Pc = 75 kN, and PE = 25 kN. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. a PB Answer: Ay = i BO PB a B Pc a Calculate the reaction forces Ay and Dy acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Ax = 0, it has been omitted from the free-body diagram.) D Pc D a D₂ PE a PE E kN, Dy= i -x E X kN.
Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Let o-1.5m.b=3.5 m.w=50 kN/m and P = 45 kN. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. C Calculate the reaction forces A, and D, acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since A, -0, it has been omitted from the free-body diagram.) Answers: A, b KN, D, KN.
Static-decal examAs shown in the figure, one force double and two are applied to the steel beam. At point A of the systemcalculate the pair (MA) it creates (CW Clockwise CCW: counterclockwise
For the figure shown below, compute the bending moment in section 1. Neglect the weights of the member. Note that point B is pin-connected. 50KN ... 2m 5m 60° 5m 5m
Suppose beam of the list on a comer A and against a wall at the point B( No friction any surfaces) The Beam angle 30 degrees. The force between the beam and the Conner (at point A) is 10N, Calculate X Component of force this force given the coordinate axes defined in the Figure. Suppose a beam of lengh L sts ona comer Aend againat a wal at point 8 (Aume na tion on any sufacen). The bean mtnde degrees with the comer e shown in the gun Asune he force betenen the bean and the comer a pont Ajis 10N, cae ha bron given the coordeatn auna dafred in the fgum II. Calculate all the Support reaction at B. For the purposes of Submission Divide all your force Values by q0*a (ie. Fa/(q0*a), thereby yielding a unitless number 90 D E 2a B.
Learning Goal: To determine the support reactions in a statically indeterminate beam using the moment- area method. Part A - Support reaction force at B The beam shown has length L = 15.0 ft and is loaded with the applied moment M = 210 kip - ft at B. Assume EI is constant. (Figure 1) Using the moment-area method, determine the magnitude of the unknown support reaction at B due to the applied moment. Express your answer to three significant figures and include appropriate units. > View Available Hint(s) ? |By| = |10.5 kip Submit Previous Answers
Question 4 Sketch bending moment diagram for the loading acting on the beam as shown in Figure Q4. From your results, calculate area required for tensile reinforcement using M the formula 4, You may use fyk = 500 MPa and z = 1400 mm. 0.87 fyk 90 kN/m 30 kN/m 200 KN 20 kN/m Danim 100 kNm 2m 5m 3m Figure Q4
Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Let a=4.0 ft, b-9.0 ft. c=4.0 ft, d=3.0ft, w=8 kips/ft and P = 66 kips. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. B B ÎÎÎÎÎÎ Answers: Ay=i b d For this loading, calculate the reaction forces Ay and Ey acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Ax = 0, it has been omitted from the free-body diagram.) W C b C C D E kips, Ey = i E X Ey kips.