A beam is simply support at the ends and is continuous over two spans. The left-hand span is 16 ft and the right-hand span is 20 ft. The beam supports a uniform load of 900 plf, which includes its own weight, over the entire 36 ft and also a concentrated load of 10,000 lb applied at a point that is 5 ft from the left-hand end of the beam. Determine the bending moment at the in intermediate support due to the uniform load only. A. -38,600 ft-lb B. -37,800 ft-lb C. -36,500 ft-lb D. -35,200 ft-lb

A beam is simply support at the ends and is continuous over two spans. The left-hand span is 16 ft and the right-hand span is 20 ft. The beam supports a uniform load of 900 plf, which includes its own weight, over the entire 36 ft and also a concentrated load of 10,000 lb applied at a point that is 5 ft from the left-hand end of the beam. Determine the bending moment at the in intermediate support due to the uniform load only. A. -38,600 ft-lb B. -37,800 ft-lb C. -36,500 ft-lb D. -35,200 ft-lb

Steel Design (Activate Learning with these NEW titles from Engineering!)

6th Edition

ISBN:9781337094740

Author:Segui, William T.

Publisher:Segui, William T.

Chapter10: Plate Girders

Section: Chapter Questions

Problem 10.7.9P

See similar textbooks

Similar questions

ANALYZE THE STRUCTURE USING CANTILEVER METHOD COMPUTE AXIAL LOAD OF CF MOMENT AT SUPPORT G 50 KN A E 25 KN D G Com H 8m 3m 4m
A vertical load of W is supported by the tripod shown. a. Which of the following is the most stressed leg(s)?b. If the capacity of each leg is 25 kn, what is the safe valueof W?c. Determine the axial force on leg AD if the maximum safe valueof W is applied.
A beam is made up of two identical bars AB and BC, by hinging them together at B. The end A is built-in (cantilevered) and the end C is simply- supported. With the load P acting as shown, the bending moment at A is 14 L B O L/2 P 4 L
STATICS OF RIGID BODIES Three wheel loads rail as a unit across a 12m span. The loads are A-10kn, B-20kN to the right of A; and C-40kN to the right of B. Determine the magnitude of the resultant and show the distance from point A.
A 290 N/m light crane rail sits on and is securely fastened to a W400 mm x 67 kg/m crane girder. The girder is simply supported on a span of 9m. Crane wheel loads: V = 80kN, H = 8kN Assume full transfer of lateral load to the top flange of the girder. Girder properties are: A =8580 mm2 d= 400mm tw = 8.5mm bf = 179mm tf =14mm Ix = 2.44 x 108 mm4 Iy = 0.14 x 108 mm4 a) What is the maximum bending stress, fbx (MPa), in the girder? b) What is the maximum bending stress, fby (MPa), in the girder? c) Using the interaction formula, fbx/Fbx + fby/Fby, determine the maximum span of the girder so that the section shall be adequate for the given loads if the allowable stresses are: Fbx = 207 MPa; Fby = 258 MPa.
A 290 kg/m light crane rail sits on and is securely fastened to a W400mmx67kg/m crane girder.The girder is simply supported on a span of 9m.Assume full transfer of lateral load to the top flange of the girder. Crane wheel loads: Vertical load at the centroid (V)=80kN Horizontal load at the top flange (H)=8kN Properties: A=8580 mm^2 d=400 mm bf=179 mm tf=14 mm Ix=244 x 10^6 mm^4 Iy=14 x 10^6 mm^4 tw=8.5 mm a.what is the maximum bending stress fbx(MPa) in the girder? b.determine the maximum bending stress fby(MPa) in the girder c.Using the interaction formula fbx/Fbx + fby/Fby
Refer to the beam loaded as shown. (a)What is the Value of horizontal reaction at the fixed support?(b)What is the value of resulting couple at A?
A three-span continuous beam has an internal hinge at B. Section B is at the mid-span of AC. Section E is at the mid-span of CG. The 20 kN load is applied at section B whereas 10 kN loads are applied at sections D and F as shown in the 20 kN 10 kN 10 kN 5 kN/m C H B A D FAG 4 m 4 m 4 m In the figure, CD = DE = EF= FG=1m figure. Span GH is subjected to uniformly distributed load of magnitude 5 kN/m. For the loading shown, shear force immediate to the right of section E is 9.84 kN upwards and the sagging moment at section E is 10.31 kN-m. The magnitude of the shear force left and immediate to immediate to the right of section B are
Determine the force in member CE of the truss below. Indicate as positive if the member is in tension and negative (-) if the member is in compression. Provide the answer in kN G 3 m 1981 A E 1839 B -2 m- ce po C 5 kN -2 m- -2 m- 5 kN D 5 kN
the car is located on the span CD as shown. it impresses a load of 4000 lb which is equally distributed on all four wheels. since there are two identical trusses to support the rails, the load is 1000 lb at C and 1000 lb at D. What are the forces in the members of the truss?
A steel channel is used as a purlin of a truss. The top chord of the truss is inclined at a slope of 1 vertical to 4 horizontal and the distance between the trusses is equal to 6m. The purlin has a weight of 79 N/m and is spaced at 1.2m on centers. The dead load including the roof materials is 720 Pa, the live load is known to be 1000 Pa and it is subjected to a wind load of 1440 Pa. The coefficient of pressure at leeward and windward are 0.6 and 0.2 respectively. Properties of C200 x 76mm Sx = 6.19x10^4 mm^3 Sy = 1.38x10^4 mm^3 W = 79 N/m Allowable bending stress • Fbx = Fby = 207 MPa Assume all loads passes through the centroid. Determine the maximum bending stress for a load combination of 0.75(D + L+W) 127.11 256.17 181.15 129.06 Determine the maximum ratio of the actual to the allowable bending stress for load combination of 0.75(D + L + W). 0.90 O 1.25 1.54 1.38 Determine the bending stress along the weaker axis for a load combination of 0.75(D+ L + W). 127.11 170.73 169.48…
3. A single moving load of 120 kN is moves along a simply supported girder of 28 m span. The absolute maximum bending moment will be ----- kN*m. (a) 1680 (b) 840 (c) 420 (d) none of them