A 651.152 N painter needs to climb d=4.59 m up a ladder (measured along its length from the point where the ladder contacting the ground), without the ladder slipping. The uniform ladder is 15.594 m long and weighs 250 N. It rests with one end on the ground and the other end against a perfectly smooth vertical wall. The ladder rises at an angle of theta=72.379 degrees above the horizontal floor. What is  friction force in unit of N that the floor must exert on the ladder? Use g = 10 m/s2 if you need to.

Review Conceptual Example 7 before starting this problem. A uniform plank of length 5.0 m and weight 225 N rests horizontally on two supports, with 1.1 m of the plank hanging over the right support (see the drawing). To what distance x can a person who weighs 462 N walk on the overhanging part of the plank before it just begins to tip? 41.1 ma

A hinged beam, 92.5 kg, is supported by a horizontal cable as in the figure. The length of the cable is 2.00 m and the length of the beam is 3.00 m. Find: (a) the torque produced by gravity on the beam, (b) the tension in the cable, (c) the horizontal and vertical components of the force from the hinge, and (d) the magnitude and direction of the force from the hinge.

A beam resting on two pivots has a length of L = 6.00 m and mass M = 77.0 kg. The pivot under the left end exerts a normal force n1 on the beam, and the second pivot placed a distance ℓ = 4.00 m from the left end exerts a normal force n2. A woman of mass m = 61.5 kg steps onto the left end of the beam and begins walking to the right as in the figure below. The goal is to find the woman's position when the beam begins to tip. (a) Use the force equation of equilibrium to find the value of n2 when the beam is about to tip. (b) Using the result of part (c) and the torque equilibrium equation, with torques computed around the second pivot point, find the woman's position when the beam is about to tip.x = (c) Check the answer to part (e) by computing torques around the first pivot point.x = (d)Except for possible slight differences due to rounding, is the answer the same for F and E?