A 10-µF (C1) and a 15-µF (C2) capacitor are connected in series to a 230-V, 60-Hz source. Determine the value of the voltage drop across each capacitor.

An RC circuit is connected to a 120-V, 60-Hz power source. The resistor is 25 ohms and has a voltage drop of 65 volts. What is the capacitance of the capacitor?

Describe in words how the charges behave on capacitors which are in a parallel circuit. How do the individual capacitor charges compare to the charge of the equivalent capacitor?

10 V sine 90 kHz 1 kQ C1 1 nF 2. Using a Square function with 90,000 Hz in your function-generator, a 1000-ohm resistor, and a 1 nano-Farad capacitor, determine the charging time for the capacitor. Show your calculations and show the charging-discharge curve with an oscilloscope in TINKERCAD.

Find the equivalent inductance as seen from the terminals shown in the figure.

Find the Equivalent Capacitance between P and Q from the figure below

What is the maximum inductance that can be obtained by connecting four 2-H inductors in series and/or parallel? What is the minimum inductance?

A utility company plans to connected a total of 20uF of capacitance to a 7,200 volt line. To make this connection, four capacitors will be connected in series. What is the capacitance of each capacitor?

An initially uncharged parallel plate capacitor is connected to a circuit containing a battery with emf -15V and a resistor, R = 8.5MN as shown in the figure to below. The capacitor whose plates have an area of A = 3.1mm² are separated by a distance of d = 3.4mm and one third of the capacitor is filled with a dielectric material, K₁= 1.1 and the rest (two thirds) is filled with another dielectric material, K₂=4.5. At t=0 the switch is closed. 7.1 seconds after the switch is closed the electric field within the first dielectric material (₁) is observed to be 15 x 10³ N/C. Find the potential difference across the capacitor at this instant (t = 7.1 s) in terms of permitivity of free space €0? Express your answer using zero decimal place. R S K₁ K₂