An initially uncharged parallel plate capacitor is connected to a circuit containing a battery with emf-15V and a resistor, R = 8.5MN as shown in the figure to below. The capacitor whose plates have an area of A = 3.1mm² are separated by a distance of d = 3.4mm and one third of the capacitor is filled with a dielectric material, K₁= 1.1 and the rest (two thirds) is filled with another dielectric material, K₂ = 4.5. At t=0 the switch is closed. 7.1 seconds after the switch is closed the electric field within the first dielectric material (₁) is observed to be 15 x 10³ N/C. Find the potential difference across the capacitor at this instant (t = 7.1 s) in terms of permitivity of free space €0? Express your answer using zero decimal place. R E K1 K₂

An initially uncharged parallel plate capacitor is connected to a circuit containing a battery with emf-15V and a resistor, R = 8.5MN as shown in the figure to below. The capacitor whose plates have an area of A = 3.1mm² are separated by a distance of d = 3.4mm and one third of the capacitor is filled with a dielectric material, K₁= 1.1 and the rest (two thirds) is filled with another dielectric material, K₂ = 4.5. At t=0 the switch is closed. 7.1 seconds after the switch is closed the electric field within the first dielectric material (₁) is observed to be 15 x 10³ N/C. Find the potential difference across the capacitor at this instant (t = 7.1 s) in terms of permitivity of free space €0? Express your answer using zero decimal place. R E K1 K₂

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

Chapter19: Capacitors

Section: Chapter Questions

Problem 3PA: You find that a 25-F capacitor connected to 480 VAC is defective. The storeroom has no capacitors...

See similar textbooks

Similar questions

A 15-F AC capacitor is connected in series with a 50 resistor. The capacitor has a voltage rating of 600 WVDC. The capacitor and resistor are connected to a 480-V, 60-Hz circuit. Is the voltage rating of the capacitor sufficient for this connection?
List the five capacitor replacement rules.
A postage stamp mica capacitor has the following color marks starting at the upper left dot: yellow, violet, brown, green, no color, and blue. What are the capacitance value, tolerance, and voltage rating of this capacitor?
Three capacitors having capacitance values of 20F,40F, and 50F are connected in parallel to a 60 - Hz power line. An ammeter indicates a circuit current of 8.6 amperes. How much current is flowing through the 40F capacitor?
A capacitor uses air as a dielectric and has a capacitance of 3 F. A dielectric material is inserted between the plates without changing the spacing, and the capacitance becomes 15 F. What is the dielectric constant of this material?
You are an electrician working in an industrial plant. You discover that the problem with a certain machine is a defective capacitor. The capacitor is connected to a 240-volt AC circuit. The information on the capacitor reveals that it has a capacitance value of 10 mF and a voltage rating of 240 VAC. The only 10-mF AC capacitor in the storeroom is marked with a voltage rating of 350 WVDC. Can this capacitor be used to replace the defective capacitor? Explain your answer.
Two capacitors having values of 80 F and 60 F are connected in series. What is the total capacitance?
An RC series circuit is connected to a 120-V, 60-Hz power source. The resistor is 25 and has a voltage drop of 65 volts. What is the capacitance of the capacitor?
You find that a 25-F capacitor connected to 480 VAC is defective. The storeroom has no capacitors with a 480-VAC rating. However, you find two capacitors rated at 50 F and 370 VAC. Can these two capacitors be connected in such a manner that they can replace the defective capacitor? If yes, explain how they are connected and why the capacitors will not be damaged by the lower voltage rating. If no, explain why they cannot be used without damaging the capacitor.
What frequency must be applied to a 33-mH inductor to produce an inductive reactance of 99.526 ?
You are working in an industrial plant. You have been instructed to double the capacitance connected to a machine. The markings on the capacitor, however, are not visible. The capacitor is connected to 560 volts and an ammeter indicates a current of 6 amperes flowing to the capacitor. What size capacitor should be connected in parallel with the existing capacitor? What is the minimum AC voltage rating of the new capacitor? What is the minimum DC voltage rating of the new capacitor? What is the minimum KVAR size that can be used in this installation?
How should four 2.0 (F capacitors be connected (draw and name the circuit type) to have a total capacitance of (a) 8uF, (b) 2uF, (c) 1.5uF (d) 0.5uF?