ASAP A 1.8-kg collar is attached to a spring with unstretched length of 1.03 m. The collar moves in thevertical plane around a circular ring, which has a radius of 1.03 m. The collar has a speed of 13 m/s atposition 1, where 0 =45°. The spring has stiffness of 120 N/mPosition 1V₁ m/sPosition 2Choose...Choose...Position 32RA-Calculate collar speed at position 2 where 0 = 30°B-Knowing the collar reaches position 3, (where 0 = 0°) with a speed of 11.43 m/S,calculate the magnitude of the normal reaction (in N) between the collar and the ringat position 3ww0₂0₁

Given: Mass of the collar→m=1.8 Kg Radius of the ring→r=1.03 m Unstretched length of the…

A 1.8-kg collar is attached to a spring with unstretched length of 1.03 m. The collar moves in the vertical plane around a circular ring, which has a radius of 1.03 m. The collar has a speed of 13 m/s at position 1, where 0-45°. The spring has stiffness of 120 N/m Position I V₁ m/s Position 2 WAM Choose... Choose... Position 3 2R A-Calculate collar speed at position 2 where 0 = 30⁰ B-Knowing the collar reaches position 3, (where 0 = 0°) with a speed of 11.43 m/S, calculate the magnitude of the normal reaction (in N) between the collar and the ring at position 3 ww AP

A 1.8-kg collar is attached to a spring with unstretched length of 1.03 m. The collar moves in the vertical plane around a circular ring, which has a radius of 1.03 m. The collar has a speed of 13 m/s at position 1, where 0-45°. The spring has stiffness of 120 N/m Position I V₁ m/s Position 2 WAM Choose... Choose... Position 3 2R A-Calculate collar speed at position 2 where 0 = 30⁰ B-Knowing the collar reaches position 3, (where 0 = 0°) with a speed of 11.43 m/S, calculate the magnitude of the normal reaction (in N) between the collar and the ring at position 3 ww AP

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

F2 Problem 2. EOM Derivation Derive the equation of motion for the following system: F3 F4 Dry Friction= Fµ m Q Search DII % y(t) F5 ☀ F6 A F7 7 PrtScn F8 * M Home F9 B E
Situation 5: Suppose the coefficient of kinetic friction between me and the plane as shown in figure is µ = 0.2 and that m = 20 kg and m² = 20 kg 53. What is the acceleration of Block A 0.605 -0.605 0.303 -0.303 60° 54. What is the tension on the chord? 80.31 N 72.12 N 78.17 N 66.71 N 1.1 m/s 52. What is mass of block B in order to move 1m up in an inclined when the block initially at rest 18.83 kg 20.41 kg 15.61 kg 25.12 kg 30° 55. What is the time required for block B to reach the top assuming it is initially 2.5 m away. 4.06 S 1.07 s 2.87 s 3.24 s
The 544g collar is free to slide on the smooth rod OA. The rod rotates about pin O at constant angular velocity, é. a =en + še, = a = RÔ?e, + RÖe, for a circular path, R = radius 2.1 Use N-T coordinates, draw a FBD and a kinetic diagram to determine the minimum value of é for which the collar will maintain contact with the stop at A throughout the rotation. 2.2 Would friction between the collar and the rod affect your result in 2.1?
6. A spool of cable (mass = 50 kg, kg = 1 m) rests on an inclined slope (μs = μ = 0.2), with the cable end secured to a wall as shown. The spool is released from rest and slips at a contact point A. Find the initial cable tension T and the angular acceleration of the spool. 0.3 m 30° B -0.6 m
Q3. In the position shown in Figure, the system is in the rest. Cylinder B is considered solid and moves in frictionless bearings. The spring is originally unstretched and has a modulus of 10000 N/m. Assuming that the coefficient of friction is 0.25, what will be the speed V of block A after dropping 20 cm. k=10000 N/m mc= 40 kg A=0.25 20 cm mB= 40 ka לדלק RB= 20 cm mA= 100 kg
The figure below shows two blocks A and B connected by a massless rope that passes over a massless, frictionless pulley. Block A has mass 10 kg and is held stationary on a frictionless 40°. Block B has a mass 3.0 kg and hangs vertically from the other end of the rope. Block A is released and allowed to move along the incline. What is the acceleration of incline with 0 = block B? Frictionless, massless pulley A B
The Block with a mass of 4-Kg is hung with a spring. The stiffness constant of the spring K = 10 N/cm. The block is at rest position at point A with a 4-cm stretched of spring. Block is pulled down immediately with a force F=100-N Calculate the velocity of block when it passes point B which is 5-cm away from point A. K. 10 N/cm. 4 kg. VA- O A 5.cm. F = 100-N ---- --- VB = ?
The crate with a mass of 80 kg is being towed by a chain which is directed at 20°. Find the crate acceleration in t = 2 s if the force P = 90t² N, normal force of 661.67 N and the coefficient of kinetic friction = 0.3. O a. 7.51 m/s² O b. 1.75 m/s² O c. 3.50 m/s² d. 2.44 m/s² 20° P
A ball governor of the vertical compression spring type runs at a mean speed of N = 189.228 rev/min. The bell crank lever arms are a = 0.158 m and b = 0.063 m and the rotating balls have a mass of m = 2.793 kg each, and the ball radius is r = 0.114 m at the mean speed. Part A: If the speed range of the governor at the mean speed is A = 1.287 rev/min, determine the friction force Fu at the sleeve (neglect the effect of gravity on the balls). Part B: Determine the spring stiffness S that would be required to make the governor isochronous if the sleeve lift is y = 0.013 m from the mean position (assume the ball arm is vertical at the mean position).
The mass blocks m1 = m2 = 1kg are connected by a light rope passing through a poea. An outsoon F x 20N is applied to m2, at 30 degrees above the horizontal, which moves over the rough horizontal plane. Calculate the acceleration of the blques and the tensioning on the rope on each side of the pulley, if it has a radius of 0.05m and ineria of 0.025 kgm^2 with respect to its axis of rotation. Consider the coefficient of friction between m2 and the plane as uk = 0.4
The 10 N cylinder moves in a friction tube. Spring constants are k1 = 150 N / m and k2 = 200 N / m. When the system is at rest, d = 0.5 m. The system rotates around a fixed z-axis. In the case where d = 0.12 m, what is the coefficient of friction for the cylinder to have a constant velocity of 9.825 m / s?
block C mass = 99 kg block D mass = 66kg horizontal force (H) = 555N and is applied at block D. Angle = 32.779 degrees note: Ignore friction. Computations must follow D'Alembert's Principle or else the solution is null and void. And answers should be in Newtons or KiloNewtons 1.) Calculate the Normal Force of Contact between blocks D and C. 2.) Determine the Block D Acceleration 3.) Determine the Block C Acceleration