A 0.05 mM solution of DCPIP was placed in a 1 cm spectrophotometer cuvette and a beam of light at 600nm was passed through the cuvette. The extinction coefficient for DCPIP is 3500 L/mole/cm under the specific conditions used. What proportion (as a percentage) of light would emerge from the other side of the cuvette?

A 0.05 mM solution of DCPIP was placed in a 1 cm spectrophotometer cuvette and a beam of light at 600nm was passed through the cuvette. The extinction coefficient for DCPIP is 3500 L/mole/cm under the specific conditions used. What proportion (as a percentage) of light would emerge from the other side of the cuvette?

Principles of Instrumental Analysis

7th Edition

ISBN:9781305577213

Author:Douglas A. Skoog, F. James Holler, Stanley R. Crouch

Publisher:Douglas A. Skoog, F. James Holler, Stanley R. Crouch

Chapter6: An Introduction To Spectrometric Methods

Section: Chapter Questions

Problem 6.18QAP

See similar textbooks

Similar questions

3.) The accuracy of a spectrophotometer is evaluated by preparing a solution of 60.06 ppm K2Cr2O7 and measuring its absorbance at a wavelength of 350 nm in a cell with a pathlength of 1.00 cm. The expected absorbance is 0.640. What is the expected molar absorptivity of K2Cr2O7 at this wavelength? 4.) A solution’s transmittance is 35.0%. What is the transmittance if you dilute the solution to half of its initial concentration?
Q4) (a) Explain how the components of a mixture are separated in gas chromatography. (b) An aqueous solution whose concentration is 0.00356 M was analyzed using spectrophotometer with a molar absorptivity of 412 cm-1 mol-1 L in a cell with a 2.00 cm pathlength. Calculate the absorbance and transmittance for the above solution. (c) Analyze the reasons why a dropping mercury electrode is better as compared to a conventional electrode.
Suppose a student is preparing a set of standard solutions for use in a spectrophotometric study. If percent transmittance, %T, were measured in the standard solutions before the color had a chance to fully develop, the measured value would be compared with solutions that have allowed the color to fully develop.
(a) You measure the percent transmittance of a solution containing chromophore X at 400nm in a 1-cm path length cuvette and find it to be 50%. What is the absorbance of this solution? (b) What is the molar absorptivity of chromophore X if the concentration of X in the solution measured in question (a) is 0.5mM? (c) What is the concentration range of chromophore X that can be assayed if, when using a sample cell of path length 1, you are required to keep the aborbance between 0.2 and 0.8?
Exactly 5.00 mL aliquots of a solution containing analyte X were transferred into 50.00-mL volumetric flasks and the pH of the solution is adjusted to 9.0. The following volumes of a standard solution containing 2.00 µg/mL of X were then added into each flask and the mixture was diluted to volume: 0.000, 0.500, 1.00, 1.50 and 2.00 mL. The fluorescence of each of these solutions was measured with a fluorometer, and the following values were obtained: 3.26, 4.80, 6.42, 8.02 and 9.56, respectively. ii. Using relevant functions in Excel, derive a least-squares equation for the data, and use the parameters of this equation to find the concentration of the phenobarbital in the unknown solution.
Quinine in a 1.553-g antimalarial tablet was dissolved in sufficient 0.10 M HCl to give 250 mL of solution.A 10.00-mL aliquot was then diluted to 50.00 mL with the acid. The fluorescence intensity for the dilutedsample at 347.5 nm provided a reading of 196 on an arbitrary scale. A standard 100-ppm quinine solutionregistered 125 when measured under conditions identical to those for the diluted sample. Calculate the massin milligrams of quinine in the tablet.
The transmittance of a solution measured at 590 nm in a 1.5-cm cuvette was 76.2%. (a) What is the corresponding absorbance?(b) If the concentration is 0.0802 M, what is the absorptivity of this species at this wavelength? (c) If the absorptivity is 10,000 L mol-1 cm-1, what is the concentration?
A Dubosq colorimeter consists of a cell of fixed path length and a cell of variable path length. By adjusting the length of the latter until the transmission through the two cells is the same. the concentration of the second solution can be inferred from that of the former. Suppose that a plantdye of concentration 25 μg dm-3 is added to the fixed cell. the length of which is 1.55 em. Then a solution of the same dye. but of unknown concentration. is added to the second cel l. It is found that the same t ransmittance is obtained when the length of the second cel l is adjusted to 1.18 em. What is the concentration of the second solution?