900 m3/min of recirculated air at 23°C DBT and 13°C dew point temperature is to be mixedwith 400 m3/min of fresh air at 32°C DET and 50% RH. Determine the enthalpy, specificvolume, humidity ratio and dew point temperature of the mixture. Q1The atmospheric air at 24°C dry bulb temperature and 13°C wet bulb temperature is flowingat the rate of 150 m³ / min through the duct. The dry saturated steam at 100°C is injected into theair steam at the rate of 100 kg per hour. Calculate the specific humidity and enthalpy of theleaving air. Also determine the dry bulb temperature, wet bulb temperature and relativehumidity of the leaving air.

Answered: Image /qna-images/answer/9032b94d-a357-49b7-b14a-adb3cd4ed6c1.jpg

900 m3/min of recirculated air at 23°C DBT and 13°C dew point temperature is to be mixed with 400 m3/min of fresh air at 32°C DET and 50% RH. Determine the enthalpy, specific volume, humidity ratio and dew point temperature of the mixture.

900 m3/min of recirculated air at 23°C DBT and 13°C dew point temperature is to be mixed with 400 m3/min of fresh air at 32°C DET and 50% RH. Determine the enthalpy, specific volume, humidity ratio and dew point temperature of the mixture.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

the question below is already answered in the photos that I provided I only want to ask how did it find the answersSaturated steam at a pressure of 25 psia is sprayed into a stream of moist air. The initial condition of the air is 55 dry-bulb temperature and 35 F de-point temperature. The mass rate of air flow is 2000 lb per min. Barometric pressure is 14.696 psia. Determine how much steam must be added in lb per min to produce a saturated air condition, b) the resulting temperature of the saturated air.my question here is:regarding of the solution pls elaborate how did it get w1 and h1 is it given in the psychrometric chart or it has a specific solution to follow
Moist air at 21 C° DBT and 15 C° WBT and standard atmospheric pressure is humid by water spray. If for each one kg of dry air passing through the duct 0.002 kg of wa 100 C° is injected and totally evaporated. Draw the psychometric and schematic figu process and calculate for the air leaving the a- The moisture content. spray chamber: b- The enthalpy c- Dry bulb temperature.
VAPORIZATIONPROBB....................A c0mpressed air tank having a v0lume 0f 0.42m3 is filled with air at gauge pressure 0f 200psi and 27oC and saturated with water vap0r. The tank wasfilled by c0mpressing air at 14.5 psia at 24oC with 80% humidity. Calculate the weight 0f water vap0r c0ndensed.
Winter air is heated & humidified thru steam heated coil and humidified using water sprayer. Air is flowing at a rate of 750 cubic meter per minute. Winter air is initially at 10 C dry bulb and 90 % RH. The final condition of air after the process is 30 C dry bulb & 60 % RH. Consider normal atmospheric pressure. Determine: rate of saturated steam injected in the sprayer per second with steam temperature of 30 C (INCLUDE THE PYCHROMETRIC CHART PLS)
air at dry ball temperature is 35 ° C and RH 30%, air is heated to dry ball temperature 85 ° C. The heated air is then flowed through a humidifier to reduce RH to 25%. Determine the change in absolute humidity of air in initial to final conditions and change in air enthalpy in initial to final conditions
A winter air-conditioning system adds for humidification 0.0025kg/s of saturated steam at 101 kPa pressure to an airflow of 0.36 kg/s.The air is initially at a temperature of 6.2019123751 C DB with a relativehumidity of 20 percent. What are the dry-bulb and wet-bulb temperaturesof the air leaving the humidifier?Kindly graph it on the given image
A winter air-conditioning system adds for humidification 0.0025kg/s of saturated steam at 101 kPa pressure to an airflow of 0.36 kg/s.The air is initially at a temperature of 7 C DB with a relativehumidity of 20 percent. What are the dry-bulb and wet-bulb temperaturesof the air leaving the humidifier?
Atmospheric air, which is a mixture of dry air and water vapour, is supplied into ducting with a cooling coil. Initially it has a relative humidity of 0.57, volumetric flow rate of 0.72 mis and temperature of 17°C. The atmospheric air is then passed over a cooling coil such that the temperature drops to 6°C. As this is below the dew point, the water vapour condensates after cooling coll and the air leaves in a saturated state. Assuming the barometric pressure of atmosphenic air to be 1.01325 bar, determine the folowing quantities in question parts () to (vi): (1) Partial pressure of water vapour in the air and water vapour mixture entering, Pul
Determine the expression for the final temperature of the mixture in terms of the rate of heat transfer to the mixing chamber and the inlet and exit mass flow rates.
An air conditioning plant supplies air to a room at a rate of 1.26 kg/s, the supply air being made up of equal parts by weight of outdoor and recirculated air. The mixed air passes through a cooler coil fitted with a by-pass duct, face-and-by-pass dampers being used for humidity control. The air then passes through an after-heater and supply fan. In a test on the plant, the following conditions were measured: a. Make neat sketches showing the plant arrangement and the psychrometric cycle and identify corresponding points on both diagrams. b. Show on the plant arrangement diagram the controls required to maintain the desired room condition. c. Ignoring any temperature rise through the supply fan calculate the mass flowrate of air through the cooler coil, and the cooler coil and heater battery loads, in kW.
3. An evaporative cooling tower with an induced draft fan at the air exit is used by a large air- conditioning facility located in a City. The circulating water flow rate is 7.57 m³/min and the water enter the cooling tower at 38 °C. The air inlet conditions are 27 °C dry bulb and 16 ° C wet bulb. The exit air is at 32°C and 90% relative humidity. Determine the air flow rate required to cool the water to 27°C and the quantity of water evaporated. The makeup water is available at 27°C.
The air has a dry ball temperature of 40 ℃ and a wet bulb temperature of 26 ℃ initially heated in the heater so that the dry ball temperature increases to 90 ℃. then the air is passed through the pile of corn kernels to dry. Then this air is passed to the dehumidifier to reduce the RH to 10 ℃. Draw the course of the air change process on a psychometric diagram. The airflow rate through the corn kernels pile and dehumidifier was 6.0 m / s and the pile cross-sectional diameter was 0.5 m a. Determine the amount of water lost from the pile of corn kernels (in grams of water / second) = b. Determine the amount of water lost from the air when passing through the dehumidifier (in grams of water / second) =