6,000 ft of 7-in C-75 grade of casing string will be run in a borehole having a diameter of 8.5-1m. The casing has a unit weight of 38 Ibm/ft and a wall thickness of 0.540-in. Mud weight used to run the casing into the borehole is 10 lbm/gal (ppg). a) Calculate the weight of casing string in the air. b) Calculate the hook load when the casing is in the borehole. c) Calculate the borehole capacity in terms of bbl/ft. d) Calculate the borehole capacity in terms of bbl. e) Calculate the displacement of the casing in terms of bbl/ft. ) Calculate the displacement of the casing in terms of bbl, g) Calculate the volume of cement slurry to fill the annulus in terms of bbl and cuft assuming a excess volume factor of 1.5) h) Calculate the maximum length of the casing if the rig used for this operation can handle 250,000 Ibf of hook load.

6,000 ft of 7-in C-75 grade of casing string will be run in a borehole having a diameter of 8.5-1m. The casing has a unit weight of 38 Ibm/ft and a wall thickness of 0.540-in. Mud weight used to run the casing into the borehole is 10 lbm/gal (ppg). a) Calculate the weight of casing string in the air. b) Calculate the hook load when the casing is in the borehole. c) Calculate the borehole capacity in terms of bbl/ft. d) Calculate the borehole capacity in terms of bbl. e) Calculate the displacement of the casing in terms of bbl/ft. ) Calculate the displacement of the casing in terms of bbl, g) Calculate the volume of cement slurry to fill the annulus in terms of bbl and cuft assuming a excess volume factor of 1.5) h) Calculate the maximum length of the casing if the rig used for this operation can handle 250,000 Ibf of hook load.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Ql:- A 80 mm diameter of pipes and 300 mm long slides by its own weight of 1.7 kN inside a large cylinder of 80.2 diameter. The clearance between the eylinder and pipe is filled with oil of 5 stokes viscosity and s.g 0.92, find the velocity of sliding the pipe.
HYDRAULICS Support your answer with the appropriate solution and diagram. 1. An oil of viscosity 5 poise is used for lubrication between a shaft and sleeve. The diameter of the shaft is 0.5 m and it rotates at 200 rpm. Calculate the kW power lost in the oil for a sleeve length of 100 mm. The thickness of the oil film is 1.0 mm. A. 2.15 B. 8.45 C. 4.76 D. 8.42
A glass tubing consist of 5 vertical stems which are 500 mm apart connected to a single horizontal tube. The tube is filled with water to a depth of 500 mm in the vertical stems. How fast should it be rotated about an axis through the middle stem to just zero the depth of water in that stem? Ans: o = 42.3 rpm %3D
A petrol engine has a cylinder diameter and stroke of 120mm and 235 mm respectively. The clearance volume is 0.00029 m3. Find the total volume of the cylinder in m3? The total volume in m3?
7. One (1) statute mile is equivalent to: a. 73,360in. b. 1962yards c. 1609.7561m d. 5580ft 8. Convert one (1) US gallon in ft. c. 3782.4936 a. 230.8219 b. 0.0038 d. 0.1336 9. Compute the probable density of a fluid inside a floating spherical balloon having a 2m diameter if the tension in the balloon's tie rope is observed to be 2kgf. Assume that the density of air is 1.20kg/m?. a. 0.7225kg/m 10. A piece of unknown material has an intricate shape and weighs 126g in free air and 83g when submerged into water. What is the relative density of the piece? a. 3.3243 b. 0.6225kg/m? c. 0.7025kg/m³ d. 0.5848kg/m³ b. 2.9302 c. 3.5143 d. 3.3158 11. Is a working substance whose chemical composition remains but 'assumed' that there is no change of phase all throughout the working process of such substance. a. Surroundings b. Working Substance c. Ideal gas d. Pure Substance
A Huston turbine impeller with a diameter of 0.217 m is used in a tank with a diameter of 0.65 m filled with liquid to a height of 0.65 m. Four baffles (baffles) are used to avoid vortex, all with a width of 0.01 m. The turbine operates at 275 rpm with a liquid that has a density of 1000 kg/m³ and a viscosity of 0.020Pa.s. a) Considering that the mechanical efficiency is 50%, what is the power in HP of the commercial engine that you should specify?
A Huston turbine impeller with a diameter of 0.217 m is used in a tank with a diameter of 0.65 m filled with liquid to a height of 0.65 m. Four baffles (baffles) are used to avoid vortex, all with a width of 0.01 m. The turbine operates at 275 rpm with a liquid that has a density of 1000 kg/m³ and a viscosity of 0.020Pa.s. a) Calculate the power required in KWatts by the agitation system.
2 plates move as indicated with oil on top and water underneath V_T -> h_1 = 1mm h_2 = 2mm V_B = 8 m/s V_T = 2 m/s plate area = 5m^2 liquids SAE-30W Water a) draw velocity profile on vertical dotted line in... b) create a parametric equation for Vw and Vo c) calculate τ between liquids d) calculate force (F=τA)
3. What is the volume change in cm of a hydraulic oil when subjected to a pressure of magnitude 6 MPa? The original volume of the oil is 1500 cm3 and its bulk modulus of elasticity is 2.1x10 PA. Select one: a. DVol=-7.14 cm3. b. DVol=-8.57 cm3. c. DVol=-4.29 cm3. O d. DVol=-2.49 cm3. e. DVol=-5.71 cm3.
5. A tank contains two substance oil (A) and water (B) subject to variable air pressure; the dimension is shown below and corresponds to 1atm. If air is slowly added from a pump to bring pressure p up to 1MPA gage, what will be the total downward movement of the free surface of oil and air? Take average values of bulk moduli of elasticity of the liquids as 2050MPA for oil and 2075MPA for water. Assume the container does not change volume. Neglect hydrostatic pressures. Air 200 mm 600mm Oil- Water 700 mm 300 mm
a) Is it true that if a flow doesn’t change its magnitude or direction, there will be no net momentum imposed by the flow? Please explain.
heights for oil= 1.5m water=2.5m glycerin=1m