6. Actual Rankine cycle efficiency using pump and turbine work % Answer: If the generator efficiency = 95%, brake engine efficiency = 90% what is the combined work in KW? Answer: 8. If Cp water = 4.187 KJ/kg-K; cooling water enters the condenser at 12 deg C and leaves at 21 deg C,
Q: Water is the working fluid in an ideal Rankine cycle. Steam enters the turbine at 1400 lbf/in2 and…
A: as per guideline i have to solve only three subpart of your question
Q: Water is the working fluid in an ideal Rankine cycle. The saturated vapor enters the turbine at 18…
A: GivenP1=18MPa saturated vapourP2=6kPa
Q: 5. In a Rankine cycle, the steam at inlet to turbine is saturated at a pressure of 30 bar and the…
A: Concept of Rankine Cycle And Formula Is Used
Q: n ideal rankine cycle. Steam is generated at 4.1 mpa and 480c. The condenser is at 32c.Considering…
A: Given:P1=4.1 MPaT1=480°CT2=32°Cηb=0.78ηg=0.92m=163,600 Kg/hr
Q: In a Rankine cycle, the steam at inlet to turbine is saturated at a pressure of 30 bar and the…
A: At turbine inlet P1=30 bar =3 MPa At P=3 Mpa h1=hg=2803.2 KJ/Kg S1=Sg=6.1856 KJ/Kg-K At state 2 and…
Q: Rankine cycle, the pressure and the temperature entering the turbine is 1800 Kpa at 380 Degrees…
A:
Q: A vapor-compression refrigeration cycle using ammonia as working fluid has a refrigerating capacity…
A:
Q: Q1/ Steam enters the turbine at 30 bar, 400°C, amount of steam is extracted at 5 bar to a single…
A:
Q: In a power plant working on Rankine cycle, the enthalpy at the end of conenser is 20 kl and the end…
A: Given data: Enthalpy at the inlet of the turbine (hiT) = 100 kJ Enthalpy at the outlet of the…
Q: How does reheating allow for improved Rankine cycle performance?
A: step by step solution is given below,
Q: 9- Which of the following cycle consists of two isothermal and constant pressure processes? a) Joule…
A: Correct answer: 9. (e) Ericsson cycle 10. (c) Brayton cycle
Q: An engine operating on air standard Otto cycle, the clearance volume is 10 % of the swept volume.…
A:
Q: The open cycle gas turbines provides more flexibility when compare to closed cycle O a. FALSE O b.…
A: In open cycle gas turbine fuel is fired directly in the gas turbine. But in the case of close cycle…
Q: The thermal efficiency of an actual Rankine cycle is 85%. What is the heat input rate if the net…
A: Rankine cycle is used in steam power plants. Rankine cycle comprises the following process 1)…
Q: A vapor-compression refrigeration cycle using ammonia as working fluid has a refrigerating capacity…
A:
Q: 04: A) Prove that the ratio of work to the petrol engine works according to the Otto cycle equal: rw…
A:
Q: Water is the working fluid in an ideal Rankine cycle. Steam enters the turbine at 1400 lbf/in2 and…
A:
Q: What is the ideal reheat Rankine cycle
A:
Q: A steam power plant operates between a boiler pressure of 58 bar and a condenser pressure of 0.05…
A:
Q: P7. Water is the working fluid in an ideal Rankine cycle. The saturated vapor enters the turbine at…
A: Answer: (a) The net work per unit mass of steam flowing is 923.6288 kJ/kg. (b) The heat transfer to…
Q: . Explain at least 3 ways on how to improve the Rankine cycle efficiency
A: Given data At least 3 ways on how to improve the Rankine cycle efficiency.
Q: Q1/ Steam enters the turbine at 30 bar, 400°C, amount of steam is extracted at 5 bar to a single…
A:
Q: Combined cycle power plant consists of Rankine and Brayton cycles the data for Rankine cycle are;…
A:
Q: Your answer is correct. Determine the rate of heat transfer, in Btu/h, to the working fluid passing…
A: The solution is attached
Q: c) Sketch a P-V diagram overlaying the approximated actual Diesel cycle and idealised Diesel cycle…
A: C.
Q: Water is the working fluid in an ideal Rankine cycle. Steam enters the turbine at 1400 lbf/in2 and…
A: Given data Conditions of steam at turbine entry : 1400 lbf/in2 and 1200°F Condenser Pressure = 2…
Q: Superheated steam at 11,200 kPa and 615°C, enters the 1st stage turbine and expands to 150 kPa. It…
A: A turbine converts the thermal energy of steam obtained from a boiler and converts it to mechanical…
Q: Explain the mechanical efficiency for an ideal diesel cycle of two and four stroke engines
A: The mechanical efficiency of two stroke diesel engine is higher than that of four stroke diesel…
Q: 1. In a steam power cycle, steam enters the turbine at 30bar with the following different conditions…
A: Rankine cycle : Rankine cycle is used in steam power plants. The main component of steam power plant…
Q: - Ex Determine the efficiency of a Rankine cycle using steam as the working flaid in which the…
A: Given: The boiler pressure, Pb = 1.5 MPa The condenser pressure, Pc = 10 kPa
Q: List out the methods to improve the efficiency of the Rankine cycle.
A: Rankine cycle is a power cycle that is used in the power plant.
Q: Instructions: solve problems under the concept of Reheat, Regenerative and Reheat-Regenerative Cycle…
A: Steam at 10 MPa, 600 degrees C, enters the first-stage turbine of an ideal Rankine cycle with reheat
Q: 2-a Explain the effect of pressure ratio on the net work and the efficiency of a steam power cycle.
A: To determine: Effect of pressure ratio on Wnet and ηcycle of steam power plant
Q: What is the cycle efficency?
A: The given cycle is diesel cycle . For finding thermal efficiency of cycle we need to find…
Q: Give at least 3 Dis-advantages of Reheat Regenerative Cycle in Thermal Power Plant
A: Please refer to the detailed solution given below,
Q: In a Rankine cycle, the steam at inlet to turbine is saturated at a pressure of 30 bar and the…
A: Given Data At turbine inlet state (1) P1=3 bar= 3 MPa h1=2803.2 KJ/kg S1=Sg=6.1856 KJ/Kg-K At state…
Q: 1-A steam power plant operates between boiler pressure of (42 bar) and condenser pressure of (0.035…
A:
Q: Explain ideal regenerative cycle and actual regenerative cycle
A: Explanation about the ideal regenerative cycle and actual regenerative cycle
Q: In an ideal regenerative cycle, the steam expands in the turbine from 1100 psia and 1100 F to 80…
A:
Q: Determine the maximum cycle temperature of a diesel cycle workir The cycle has a compression ratio…
A: GivenCompression ratio rc=V1V2=16Cut-off ratio rcut=V3V2=2.5
Q: A Rankine cycle with reheating has a throttle pressure of 135 bars at the turbine inlet and 28 bars…
A:
Q: Gas turbines of a more complicated design with intermediate cooling in the compressor are most…
A: We are suppose to solve only one question. Please post other question as a separate question.
Q: Water is the working fluid in an ideal Rankine cycle. Steam enters the turbine at 1400 lbf/in2 and…
A:
Q: Dual cycle's four processess . efficiency derivation, advantages and disadvantages
A: Dual cycle The dual cycle is a mixture of two cycles, namely Otto and diesel cycle. In this heat…
please answer 6 to 10
Step by step
Solved in 4 steps with 1 images
- A Rankine cycle is executed with steam expanding initially from 20 MPaa and 100 deg SH. Condensation occurs at 300 mm HG vac. All expansion and compression efficiencies are 90 %. Sketch the equipment layout and the TS diagram. Answer the following for 10 kg/sec of steam circulated and fill up the blanks in the items below: TS diagram with the cycle showing correct location of points with respect to saturation dome line with ne and nc = 90%. Ideal heat rate in KJ/KW-hr Answer: Heat rejected at the condenser in KW (Actual) Answer: Actual Rankine engine efficiency % Answer: Ideal Rankine cycle efficiency % Answer:PROBLEM: A Rankine cycle is executed with steam expanding initially from 20 MPaa and 100 deg SH. Condensation occurs at 300 mm HG vac. All expansion and compression efficiencies are 90 %. Sketch the equipment layout and the TS diagram. Answer the following for 10 kg/sec of steam circulated and fill up the blanks in the items below: 1. TS diagram with the cycle showing correct location of points with respect to saturation dome line with ne and nc = 90%. 2. Ideal heat rate in KJ/KW-hr Answer: 3. Heat rejected at the condenser in KW (Actual) Answer: Actual Rankine engine efficiency % Answer: 5. Ideal Rankine cycle efficiency % Answer: 6. Actual Rankine cycle efficiency using pump and turbine work % Answer: 7. If the generator efficiency = 95%, brake engine efficiency = 90% what is the combined work in KW? Answer: 8. If Cp water = 4.187 KJ/kg-K; cooling water enters the condenser at 12 deg C and leaves at 21 deg C, find amount of cooling water needed by the condenser in kg/sec. (ACTUAL)…A Rankine cycle is executed with steam expanding initially from 20 MPaa and 100 deg SH. Condensation occurs at T = 86.49 degree Celsius. All expansion and compression efficiencies are 90 %. Sketch the equipment layout and the TS diagram. Answer the following for (m = 10 + 25/10 ) kg/sec of steam circulated and fill up the blanks in theitems below:1. TS diagram with the cycle showing correct location of points with respect to saturation domeline with ne and nc = 90%.2. If the generator efficiency = 95%, brake engine efficiency = 90% what is the brake work in KW?Answer: ______________________3. Actual Steam Rate for the engine in Kg/KW-hr with efficiency values at item 2. Answer: _________________________
- A Rankine cycle is executed with steam expanding initially from 20 MPaa and 100 deg SH. Condensation occurs at 399.967 millibars vac. All expansion and compression efficiencies are 90 %. Sketch the equipment layout and the TS diagram. Answer the following for (m = 10 + (SN/5) ) kg/sec of steam circulate and fill up the blanks in the items below: 1. TS diagram with the cycle showing correct location of points with respect to saturation dome line with ne and nc = 90%. 1. Ideal Rankine engine efficiency % Answer: _______________________ 2. Ideal Rankine cycle efficiency % Answer: _______________________ 3. Actual Rankine cycle efficiency using pump and turbine work % Answer: _______________ 7. Actual Rankine cycle efficiency using Qa and Qr values % Answer: _______________ 4. If the generator efficiency = 95%, brake engine efficiency = 90% what is the combined work in KW? Answer: ____________________ 5. If Cp water = 4.187 KJ/kg-K; cooling water enters the condenser at 12 deg C and leaves…A Rankine cycle is executed with steam expanding initially from 20 MPaa and 100 deg SH. Condensation occurs at 399.967 millibars vac. All expansion and compression efficiencies are 90 %. Sketch the equipment layout and the TS diagram. Answer the following for (m = 10 + (SN/5) ) kg/sec of steam circulated and fill up the blanks in the items below: 1. TS diagram with the cycle showing correct location of points with respect to saturation dome line with ne and nc = 90%. 2. Actual heat rate in KJ/KW-hr Answer: _______________________ 3. Heat rejected at the condenser in KW (Ideal) Answer: _____________________ 4. Ideal Rankine engine efficiency % Answer: _______________________ 5. Ideal Rankine cycle efficiency % Answer: _______________________ 6. Actual Rankine cycle efficiency using pump and turbine work % Answer: _______________ 7. Actual Rankine cycle efficiency using Qa and Qr values % Answer: _______________ 8. If the generator efficiency = 95%, brake engine efficiency = 90% what is…A Rankine cycle is executed with steam expanding initially from 20 MPaa and 100 deg SH. Condensation occurs at T = 86.49 degree Celsius. All expansion and compression efficiencies are 90 %. Sketch the equipment layout and the TS diagram. Answer the following for (m = 10 + SN/10 ) kg/sec of steam circulated and fill up the blanks in the items below: 1. TS diagram with the cycle showing correct location of points with respect to saturation dome line with ne and nc = 90%. 2. If the generator efficiency = 95%, brake engine efficiency = 90% what is the brake work in KW? Answer: 3. Actual Steam Rate for the engine in Kg/KW-hr with efficiency values at item 2. Answer: 4. Heat rejected at the condenser in KW (Ideal) Answer: 5. Ideal Rankine engine efficiency (% ) Answer: 6. Ideal Rankine cycle efficiency using work of the pump and turbine values % Answer: 7. Actual Rankine cycle efficiency using pump and turbine work % Answer: 8. Actual Rankine cycle efficiency using Qa and Or values % Answer:…
- A reheater cycle with two stages of reheating is executed with steam expandinginitially from 20.544 Mpa and 540oC. The pressures of two reheaters are 3.2544 Mpaand 0.85544 Mpa, and the steam leaves each reheater at 540 oC. Condensation occursat 70 oC. Calculate W, ec and ee.A reheater cycle with two stages of reheating is executed with steam expandinginitially from 20.547 Mpa and 540 oC. The pressures of two reheaters are 3.2547 Mpaand 0.85547 Mpa, and the steam leaves each reheater at 540oC. Condensation occurs at 70oC. Calculate W, ec and ee. Put state 1, 2 and so on, the cycle analysis. Make it clear format.The condensing pressure for a Rankine engine is 0.001325 MPavac. Calculate the following for steam flow rate = 1 kg/sec of steam when the steam at the beginning of expansion is at 119.6 deg SH and 4.0 Mpaa. Draw the TS and equipment diagrams for the ideal and actual case and find for the following for the ideal case:
- 3.) An ammonia compressor operates at evaporator pressure of 316.02 kPa and a condenser pressure of 1557 kPa. A twin-cylinder compressor with bore to stroke ratio of 0.85 is to used at 1200 rpm. The actual volumetric efficiency is 92% and compression and mechanical efficiency is 78% and 80% respectively. For a cooling capacity of 25 TR, (a) the sketch the p-h diagram labeling the evaporating and condensing temperature and pressures (b) define the all properties of ammonia taken from saturation table. Determine (c) the quantity of cooling water in the condenser in kg/min if the increase in temperature is 8°C, (d) the bore and stroke expressed in cm and (e) the size of the driving motor in hp. Given: h2 = h at 1557 kPa and s2 = s1 1695 kJ/kg4. The condensing pressure for a Rankıne engine Is I Calculate the net work for 1 kg of steam and the thermal efficiency when the steam at the beginning of expansion is at 50 bar and (a) saturated, (b) 350°C, and (c) 640°C. Ans. (a) 627.2 kJ/kg, 26.4%; (b) 727.3 kJ/kg, 27.5%; (c) 1079.49 kJ/kg, 32.35% ot 2 15 MPàA Rankine cycle is executed with steam expanding initially from 20 MPaa and 100 deg SH. Condensation occurs at T = 86.49 degree Celsius. All expansion and compression efficiencies are 90 %. Sketch the equipment layout and the TS diagram. Answer the following for (m = 10 + 25/10 ) kg/sec of steam circulated and fill up the blanks in theitems below: 4. Heat rejected at the condenser in KW (Ideal) Answer: ___________________5. Ideal Rankine engine efficiency (% ) Answer: _________________________6. Ideal Rankine cycle efficiency using work of the pump and turbine values % Answer: _________________________