5. Two C310x45 channels are latticed together so they have equal moments of inertia about the principal axes. Determine the minimum length of column having this section, assuming pinned ends, E = 200 GPa, and a proportional limit of 240 MPa. What safe load will the column carry for the length of 12 m with a factor of safety of 2.5? For C310x45, take 1 = 67.3x10-6 m4 Ans L = 9.89 m, F = 738 kN 6. Repeat problem 5 assuming that one end is fixed and the other hinged.

5. Two C310x45 channels are latticed together so they have equal moments of inertia about the principal axes. Determine the minimum length of column having this section, assuming pinned ends, E = 200 GPa, and a proportional limit of 240 MPa. What safe load will the column carry for the length of 12 m with a factor of safety of 2.5? For C310x45, take 1 = 67.3x10-6 m4 Ans L = 9.89 m, F = 738 kN 6. Repeat problem 5 assuming that one end is fixed and the other hinged.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Compute the maximum tensile and comprsive stresses devloped in the beam that is loaded and has the cross-sectional properties shown in fig 8 KN 120 mm 10 KN/m ΝΑ A 1=20 x10 6 mm4 4m B C 1m 50 mm
A Given the FLEXURAL RIGIDITY of the beam shown=6000 KN.m^2, find the :deflection at the roller support 2m B 3m C 3m 50 kN ID -0.025 m O No deflection O -0.125 m O +0.025 m O +0.125 m O Non of them O
3: Analysis the structure shown in figure, El is constant W=20 KN/m P-40 KN B4 4m
In 1, why if we separate the CD column, all the R1 force is in the column? But in 2, if we separate the CD column, half of the force F is in the column ... #structure_analysis
Problem 5.9 A solid steel bar has a cross section of side b and is supported as shown. Knowing that for steel p = 7860 kg/m3, determine the dimension b for which the maximum normal stress due to bending is 10 MPa. b А C D В O000 -1.2 m- -1.2 m- <1.2 m-
7. Distributed Loads A beam supports a distributed load as shown. (a) Determine the equivalent concentrated load (b) Determine the reactions at the supports. wB = 4500 N/m WA = 1500 N/m %3D A -L 6 m-
The ratio of reactions Ra and Rgof the simply supported beam, as shown in figure below, will be 5t 3t 2t/m A. B E R, R, - 2 m 2 m 2 m 2 m
Q.1: A shaft composed of segments AB, BC is fixed between the two walls at 4 and C and loaded as shown in Figure below. For steel has a 25 mm circular cross section, shearing modulus G = 83 GPa. For aluminum has a 30 mm circular cross section, shearing modulus G = 28 GPa Determine: The two torques at supports A and C 2 N.m B 3m 4m Steel aluminum Di-30mm Di-25mm G-83GPA G-28GPA
The cantilever T- beam is loaded as shown in the figure. 80 mm 40 kN/m NA 120 mm 2.0 m INa = 30x106 mm* What is the momwnr reaction at the support in kN.m?
A steel column of length 6 m forms part of a support structure and is subjected toan axial compressive load ‘P’ as shown in Figure Q3(b). Both ends of the columnare fixed. The column has the ‘I’ cross-section also detailed in Figure Q3(b). TheYoung’s modulus (E) for the steel is 210 GN/m2.i) Determine the slenderness ratio for the column and show that Eulertheory is valid. ii) Calculate the critical buckling load using Euler theory. iii) Evaluate the safe working load for the column if a load factor of3 is required.
Question 3) The AB rigid beam in the figure rests on AC and BD supports. The length of the AC cross-sectional area A is L support 244 mm 2 and the elasticity : 210 GPa. The support BD has a length L BD = 7 m, the AC AC module E AC 2 :267 mm and elasticity = 4 m, cross-sectional area A modulus E BD 9 m and point E is in the middle of the AB rigid beam. According to this; To AB rigid beamWhen a distributed load of magnitude w = BD 74 GPa. The length of the AB rigid beam is АВ 105 kN/m is in effect; LAB w kN/m A •E В LBD LẠC D Question 3-A) vertical displacement of the point (8 A) to find. Write your result in mm. Question 3- B) Find the vertical displacement (8 B ) of point В. Write your result in mm. Question 3-C) vertical displacement of the point E ( SM) to find. Write your result in mm.
14. A steel column carries an axial load of 800 kN and a moment of 69 kN-m at the top and moment at the bottom which is only70% of the moment at the top. The two moments are in opposite direction and applied about the x-axis and the steel section has the following properties: A = 12886 mm2 rx is 109 mm ry = 94 mm Sx = 1200 x 103 mm3 K = 1.0 L= 3.6 m E = 200,000 Mpa Fy = 248 Mpa Use NSCP specification for compressive stress and Fb =148 Mpa. Determine the Bending Stress if Bending alone existed. Round your answer to 2 decimal places.