5. The drinking water needs of an office are met by large water bottles. One end of a 0.25-in diameter plastic hose is inserted into the bottle placed on a high stand, while the other end with an on/ off valve is maintained 2 ft below the bottom of the bottle. If the water level in the bottle is 1.5 ft when it is full, determine how long it will take at the minimum to fill an 8-oz glass (= 0.00835 ft³) (a) when the bottle is first opened and (b) when the bottle is almost empty.

5. The drinking water needs of an office are met by large water bottles. One end of a 0.25-in diameter plastic hose is inserted into the bottle placed on a high stand, while the other end with an on/ off valve is maintained 2 ft below the bottom of the bottle. If the water level in the bottle is 1.5 ft when it is full, determine how long it will take at the minimum to fill an 8-oz glass (= 0.00835 ft³) (a) when the bottle is first opened and (b) when the bottle is almost empty.

Name: 5. The drinking water needs of an office are met bylarge water bottle
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: 5. The drinking water needs of an office are met bylarge water bottles. One end of a 0.25-in diameterplastic hose is inserted into the bottle placed on ahigh stand, while the other end with an on / off valveis maintained 2 ft below the bottom of the

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The water level in a tank is 34 ft above the ground. A hose is connected to the bottom of the tank at the ground level and the nozzle at the end of the hose is pointed straight up. The tank cover is airtight, but the pressure over the water surface is unkown. Determine the minimum tank air pressure (gage) that will cause a water stream from the nozzle to rise 72 ft from the ground. A. 13.5 psi B. 14.4 psi C. 16.5 psi D. 15.5 psi With F.B.D.
The water level in a tank is 34 ft above the ground. A hose is connected to the bottom of the tank at the ground level and the nozzle at the end of the hose is pointed straight up. The tank cover is airtight, but the pressure over the water surface is unkown. Determine the minimum tank air pressure (gage) that will cause a water stream from the nozzle to rise 72 ft from the ground. (WITH FREE BODY DIAGRAM) CHOICES: A.16.5 psi B.15.5 psi C.13.5 psi D.14.4 psi
A 22 L kerosene tank is filled with 2 cm diameter hose equipped with a 1.5 cm nozzle meter If it takes 20 s to fill the tank, determine the pressure differnce indicated by the nozzle if Cd= 0.96. The specific gravity of kerosene is 0.82. a.12.8 kPa b.11.8 kPa c.9.8 kPa d.10.8 kPa
The pressure loss through the pipe and the minimum power required to overcome the resistance to flow.
Problem 1 : A water tower holds a total volume of 100,000 L of water (10oC). The diameter of the tank is 6 m. The bottom of the tank (elevation 1030 m) connects to an outlet pipe (diameter 1/2 m) for supplying water to the water main (elevation 990 m). According to the local guidelines, pressure at any point along the water main must be between 30 and 60 psi (including the junction point with the outlet pipe). How will be water tower’s discharge rate (in gpm) be designed?
Q1. A trapezoid-shaped tank used to supply potable water to a small area which includes 8 villas (Figure 1). The tank bottom base is 3 m, while the top base is 5 m. The tank is partially submerged vertically in water so that the top is 1 m above the surface and the bottom is 3 m below the surface. Determine the total force exerted on the trapezoidal wall by the water. Vertical Pipe line from overhear tank Main distribution line Overhead tank Secondary distribution line Villa Villa Valve Villa Villa G.L. Venturimeter Villa Villa Villa Villa Junction Figure 1. Water Supply and Distribution System Q2. The water flows through a horizontal Venturi-meter at section 2 in Figure 1. The inlet and throat diameters are shown in Fig. 2 below. A mercury filled a U-tube manometer connected to the inlet and throat shows a difference in mercury level of 300 mm. The specific gravity of mercury is 13.6. Determine the flow rate, and the difference in pressure between the inlet and throat. Throat Area, AT…
a. A U tube differential manometer containing mercury was used to measure the difference of pressures in two pipes containing ethylene glycol. The difference in mercury level is 0.8 m, the level of ethylene glycol in left limb from mercury level to center of the left pipe is 1.8 m and the level of ethylene glycol in right limb from mercury level to center of the left pipe is 0.8 m. Find the head difference in m. S for ethylene glycol = 1.1, S for mercury 13.6. b. Draw a neat diagram shows all parameters. c. Discuss the differences between normal U tube and differential U tube manometers. (sub divisions b and c, upload the document) Difference in heads in m
An orifice of diameter 150 mm is fitted at the bottom of a boiler drum lenth 6 m and of diameter 2 m. The drum is horizontal and contains water up to height of 1.8 m. Find the time required to empty the boiler. Take Cd=o 0.60. Include FBD. a. 127 seconds b. 217 seconds c. 467 seconds d. 175 seconds
The longest pipe run for a hot water system is 100 m. If the pressure rise through the pump is 35 kPa, then the pressure drop per one meter in system is إختر أحد الخيارات: Pa/m 233.3 .a O Pa/m 400 .bO Pa/m 250 .c O Pa/m 375 .d O
34. Determine water jet velocity at the bottom hole of the tank if the column of water inside the tank is 100ft. a. 76.1315ft/s b. 74.4204ft/s c. 78.6282ft/s d. 80.2496ft/s
An engineering student has been given the assignment of designing a hydraulic holding system for a hay-baling system. The system has four cylinders with 120 mm diameter pistons with a stroke of 0.320 m. The lines connecting the system are 1 cm id (inside diameter). There are 15.5 m of lines in the system. For proper design, the reserve tank should hold a minimum of 50 percent more than the amount of hydraulic fluid in the system. If the diameter of the reserve tank is 30.48 cm, what is the shortest height it should be?
Q1: In a venturemeter used for measuring the flow ofoil (-0.85) through a horizontal pipeline, the pipe diameter is 2.4 times the diameter at the throat. Connections are made from the entrance to the meter and the throat to a vertical L tube containing mercury If the difference level between the fluids in the U - tube arms is (x +) in em, where S.N. is student serial number. Neglect friction in the pipe. Find an expression in terms of x for the velocity of the oil in the pipe.