Homework Help is Here – Start Your Trial Now!
Engineering
Computer Engineering
3. Three motors (M1, M2 and M3) will be run in a system. Two start (NO) and one stop (NC) button will be used to operate the system. When the first start button is pressed, the first motor (M1) and the second motor (M2) will start to run, but when the first start button is released the first motor (M1) will stop and the second motor (M2) will continue to run. When the second start button is pressed, the third motor (M3) will start to run, but even if the second start button is pressed before the second motor (M2) is running, the third motor (M3) will not be able to start. The system will be stopped at any time with the stop button.Design a PLC ladder logic program that will correctly execute the operation of the three motors. 4. Write the PLC ladder program of the periodic operation of a motor (M) that can rotate in right-left directions according to the criteria given below. The engine starts with the Start button (NO), and stops at any time with the Stop button (NC). (Turn right 5 seconds, stop 3 seconds, turn left 5 seconds and stop 3 seconds)

3. Three motors (M1, M2 and M3) will be run in a system. Two start (NO) and one stop (NC) button will be used to operate the system. When the first start button is pressed, the first motor (M1) and the second motor (M2) will start to run, but when the first start button is released the first motor (M1) will stop and the second motor (M2) will continue to run. When the second start button is pressed, the third motor (M3) will start to run, but even if the second start button is pressed before the second motor (M2) is running, the third motor (M3) will not be able to start. The system will be stopped at any time with the stop button.Design a PLC ladder logic program that will correctly execute the operation of the three motors. 4. Write the PLC ladder program of the periodic operation of a motor (M) that can rotate in right-left directions according to the criteria given below. The engine starts with the Start button (NO), and stops at any time with the Stop button (NC). (Turn right 5 seconds, stop 3 seconds, turn left 5 seconds and stop 3 seconds)

Computer Networking: A Top-Down Approach (7th Edition)
Computer Networking: A Top-Down Approach (7th Edition)
7th Edition
ISBN:9780133594140
Author:James Kurose, Keith Ross
Publisher:James Kurose, Keith Ross
Chapter1: Computer Networks And The Internet
Section: Chapter Questions
Problem R1RQ: What is the difference between a host and an end system? List several different types of end...
See similar textbooks
icon
Related questions
Question
MENG444 Programmable language controller Please help me in 3 and 4 ???
2. Design a PLC program and prepare a typical I/O connection diagram and ladder logic program that will correctly execute the hardwired control circuit shown below. L1 L2 FWD Stop REV РВ З PB1 PB 2 R-1 OL PL1 F-2 F-1 PL2 R-2 Assume: PB1 pushbutton used is an NC type. PB2 and PB3 are each wired using one set of NO contacts. OL contact is hardwired. 3. Three motors (M1, M2 and M3) will be run in a system. Two start (NO) and one stop (NC) button will be used to operate the system. When the first start button is pressed, the first motor (M1) and the second motor (M2) will start to run, but when the first start button is released the first motor (M1) will stop and the second motor (M2) will continue to run. When the second start button is pressed, the third motor (M3) will start to run, but even if the second start button is pressed before the second motor (M2) is running, the third motor (M3) will not be able to start. The system will be stopped at any time with the stop button.Design a PLC ladder logic program that will correctly execute the operation of the three motors. 4. Write the PLC ladder program of the periodic operation of a motor (M) that can rotate in right-left directions according to the criteria given below. The engine starts with the Start button (NO), and stops at any time with the Stop button (NC). (Turn right 5 seconds, stop 3 seconds, turn left 5 seconds and stop 3 seconds)
Transcribed Image Text:2. Design a PLC program and prepare a typical I/O connection diagram and ladder logic program that will correctly execute the hardwired control circuit shown below. L1 L2 FWD Stop REV РВ З PB1 PB 2 R-1 OL PL1 F-2 F-1 PL2 R-2 Assume: PB1 pushbutton used is an NC type. PB2 and PB3 are each wired using one set of NO contacts. OL contact is hardwired. 3. Three motors (M1, M2 and M3) will be run in a system. Two start (NO) and one stop (NC) button will be used to operate the system. When the first start button is pressed, the first motor (M1) and the second motor (M2) will start to run, but when the first start button is released the first motor (M1) will stop and the second motor (M2) will continue to run. When the second start button is pressed, the third motor (M3) will start to run, but even if the second start button is pressed before the second motor (M2) is running, the third motor (M3) will not be able to start. The system will be stopped at any time with the stop button.Design a PLC ladder logic program that will correctly execute the operation of the three motors. 4. Write the PLC ladder program of the periodic operation of a motor (M) that can rotate in right-left directions according to the criteria given below. The engine starts with the Start button (NO), and stops at any time with the Stop button (NC). (Turn right 5 seconds, stop 3 seconds, turn left 5 seconds and stop 3 seconds)
Expert Solution
trending now

Trending now

This is a popular solution!

steps

Step by step

Solved in 3 steps with 2 images

SEE SOLUTIONCheck out a sample Q&A here
Blurred answer
Recommended textbooks for you
Computer Networking: A Top-Down Approach (7th Edi…
Computer Networking: A Top-Down Approach (7th Edi…
Computer Engineering
ISBN:
9780133594140
Author:
James Kurose, Keith Ross
Publisher:
PEARSON
Computer Organization and Design MIPS Edition, Fi…
Computer Organization and Design MIPS Edition, Fi…
Computer Engineering
ISBN:
9780124077263
Author:
David A. Patterson, John L. Hennessy
Publisher:
Elsevier Science
Network+ Guide to Networks (MindTap Course List)
Network+ Guide to Networks (MindTap Course List)
Computer Engineering
ISBN:
9781337569330
Author:
Jill West, Tamara Dean, Jean Andrews
Publisher:
Cengage Learning
Concepts of Database Management
Concepts of Database Management
Computer Engineering
ISBN:
9781337093422
Author:
Joy L. Starks, Philip J. Pratt, Mary Z. Last
Publisher:
Cengage Learning
Prelude to Programming
Prelude to Programming
Computer Engineering
ISBN:
9780133750423
Author:
VENIT, Stewart
Publisher:
Pearson Education
Sc Business Data Communications and Networking, T…
Sc Business Data Communications and Networking, T…
Computer Engineering
ISBN:
9781119368830
Author:
FITZGERALD
Publisher:
WILEY
SEE MORE TEXTBOOKS