3) A 40 kg uniform disk rolls without slipping up an inclined plane. In the configuration shown, the angular speed of the disk is o = 1.5 rad /s?. The moment of inertia about the center of mass G is IG = mr2 | 2. Determine the maximum distance the disk travels up the plane and the friction force at that maximum- distance location. What happens after the disk reaches that location? 200 mm 60°

The 214-kg wheel has a radius of gyration about its center O of ko = 260 mm, and radius r = 0.4 m. When the wheel is subjected to the constant couple moment M = 94 N•m, it starts rolling from rest. Determine the average friction force that the ground applies to the wheel if it has been rolling without slipping. Please pay attention: the numbers may change since they are randomized. Your answer must include 2 places after the decimal point, and proper Sl unit. Take g = 9.81 m/s². M Your Answer: Answer units

Circle final answer with the correct units unit should be rad/s 

Can anyone help me with this question

The spool has a mass of 105 kg and a radius of gyration of kg = 200 mm about its center of mass G. Assume the spool rolls without slipping. If a vertical force of P = 215 N is applied to the cable, determine the acceleration of G. (Figure 1) Express your answer with the appropriate units. HẢ ? Value m/s aG = Determine the angular acceleration of the spool. Express your answer with the appropriate units. HA Value rad /s? 300 mm a = G 150 mm

The mass of gear A is 25 kg and its centroidal radius of gyration is 105 mm. The mass of gear B is 13 kg and its centroidal radius of gyration is 85 mm. Calculate the angular acceleration of gear B when a torque of 16 N-m is applied to the shaft of gear A. Neglect friction. The angular acceleration is positive if counterclockwise, negative if clockwise. TA = 165 mm TB = 125 mm

The 29-kg wheel is rolling under the constant moment of M = 85 N·m. The wheel has radius r = 0.57 m, has mass center at point G, and the radius of gyration is kg = 0.25 m. The coefficients of friction between the wheel and the ground is g = 0.37 and μk = 0.16. If the wheel rolls while slipping, determine the magnitude of the linear acceleration of point G (in m/s²). Please pay attention: the numbers may change since they are randomized. Your answer must include 2 places after the decimal point. Take g = 9.81 m/s². M Your Answer: Answer

The 16-kg wheel is rolling under the constant moment of M = 60 N-m. The wheel has radius r= 0.50 m, has mass center at point G, and the radius of gyration is kg = 0.23 m. The coefficients of friction between the wheel and the ground is ls = 0.28 and Uk = 0.14. If the wheel rolls without slipping, determine the angular acceleration of the wheel (in rad/s?). Please pay attention: the numbers may change since they are randomized. Your answer must include 2 places after the decimal point. Take g = 9.81 m/s?. M

The 150-kg wheel shown in Fig. In the initial position shown, the velocity of Gis 2 m/s down the plane, and the spring is stretched 150 mm. If the spring modulus is 1000 N/m, what will be the maximum stretch of the spring? has a radius of gyration of 360 mm with respect to its center of mass G. www 150 kg 30°

The 23-kg uniform thin hollow square plate is pinned at point O, and its side L = 0.3 m. If it is subjected to the constant moment M = 82 N·m and is released from rest from the position as shown, determine its angular velocity W (in rad/s) when it has rotated 45 Please pay attention: the numbers may change since they are randomized. Your answer must include 2 places after the decimal point. Take g = 9.81 m/s². M Your Answer: Answer