Please help with number 2. Thanks 2. An uncharged 30.0-uF capacitor is connected in series with a 25.0-0 resistor, a DCbattery, and an open switch. The battery has an internal resistance of 10.0 O andthe open-circuit voltage across its terminals is 50.0 V. The leads have noappreciable resistance. At time t 0, the switch is suddenly closed.a. What is the maximum current through the 25.0-Q resistor and when does it occur(immediately after closing the switch or after the switch has been closed for a longtime)?b. What is the maximum charge that the capacitor receives?c. When the current in the circuit is 0.850 A, how much charge is onthe plates of theсaрacitor?25010050V30 AFaAnswer =

The charge across a capacitor is given by: Where, The voltage across the capacitor is “VC”, The…

2. An uncharged 30.0-uF capacitor is connected in series with a 25.0-0 resistor, a DC battery, and an open switch. The battery has an internal resistance of 10.0 and the open-circuit voltage across its terminals is 50.0 V. The leads have no appreciable resistance. At time t-0, the switch is suddenly closed. What is the maximum current through the 25.0-Q resistor and when does it occur (immediately after closing the switch or after the switch has been closed for a long time)? What is the maximum charge that the capacitor receives? When the current in the circuit is 0.850 A, how much charge is orthe plates of the capacitor? 250 ww 100 50V 30AF

2. An uncharged 30.0-uF capacitor is connected in series with a 25.0-0 resistor, a DC battery, and an open switch. The battery has an internal resistance of 10.0 and the open-circuit voltage across its terminals is 50.0 V. The leads have no appreciable resistance. At time t-0, the switch is suddenly closed. What is the maximum current through the 25.0-Q resistor and when does it occur (immediately after closing the switch or after the switch has been closed for a long time)? What is the maximum charge that the capacitor receives? When the current in the circuit is 0.850 A, how much charge is orthe plates of the capacitor? 250 ww 100 50V 30AF

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

Chapter21: Resistive-capacitive Series Circuits

Section: Chapter Questions

Problem 6RQ: A 15-F AC capacitor is connected in series with a 50 resistor. The capacitor has a voltage rating...

See similar textbooks

Similar questions

A 15-F AC capacitor is connected in series with a 50 resistor. The capacitor has a voltage rating of 600 WVDC. The capacitor and resistor are connected to a 480-V, 60-Hz circuit. Is the voltage rating of the capacitor sufficient for this connection?
You find that a 25-F capacitor connected to 480 VAC is defective. The storeroom has no capacitors with a 480-VAC rating. However, you find two capacitors rated at 50 F and 370 VAC. Can these two capacitors be connected in such a manner that they can replace the defective capacitor? If yes, explain how they are connected and why the capacitors will not be damaged by the lower voltage rating. If no, explain why they cannot be used without damaging the capacitor.
You are an electrician working in an industrial plant. You discover that the problem with a certain machine is a defective capacitor. The capacitor is connected to a 240-volt AC circuit. The information on the capacitor reveals that it has a capacitance value of 10 mF and a voltage rating of 240 VAC. The only 10-mF AC capacitor in the storeroom is marked with a voltage rating of 350 WVDC. Can this capacitor be used to replace the defective capacitor? Explain your answer.
With V1, voltage peak to peak is 10 volts, R1=200 Ohm, R2=1000 Ohm and C1= 300 nF. Find Vx, voltage across the the capacitor, C1 and R2 when the frequency is 1000 Hz and 10000 Hz
The anode of a diode is connected to one terminal of a 1-KΩ resistor. The other terminal of the resistor is connected to the ground and the negative terminal of a 12-volt DC source is also grounded. The three components are connected in series. How much is the load current with the ideal diode?
1. 1-5 K 30v a. what is tue T CTime constant) ? b. How long will it take for the capacutor TO rtach s0% op charge? C. What is tne voltage of capa citor apter 1 seconds? d. How many tíme constants will it take for the soltage to reach 23 v? C. Gweng that the capacitor is fully changed, how will it take por it to be 20% ? long 120v + BF what is the. T ? b. what is the voltage capacitor apter 10 sec? a. C. How many time constants will it take for Tue Vo Itage to reach 80 v.? d. Given that the capaator is Fully charged, how time constants will it be to reau many GOV!
The output for the following clamping circuit is shown below assuming ideal diode calculate the avarege value and r.m.s value for the output circuit Vm-10. V-5 (V+ V) V. RL (d) Figure 7-1 simple series clippers (Ideal diodes)
At DC operating point, a capacitor behaves like an open a wire O a resistor
What is the minimum size the capacitor can be if we want to keep the ripple voltage at the output to 0.5 V or less?
6. A varactor diode exhibits (a) a variable capacitance that depends on reverse voltage (b) a variable resistance that depends on reverse voltage (c) a variable capacitance that depends on forward current (d) a constant capacitance over a range of reverse voltages
PROBLEM: The diode (blue line) should be at -10V not -8V SOFTWARE USED: LTspice XVII---Figure 1 is my work, and figure 2 is the correct sample. Please tell me what I did wrong. Thank you :))---Below is the .asc filehttps://www.mediafire.com/file/zxauoh86zi79nfu/EXPERIMENT_01.asc/file
In the following circuit the diodes are 0.7 constant voltage model 10V Select one: C. m 10K a. None of the answers b. 2 diodes are reversely biased the 10K resistor can not have currents d. 2 diodes are forwardly biased