11.9 A reinforced concrete T-beam carries a uniformly distributed super-load on a simply- supported span of 8 m. The stresses in the steel and concrete are not to exceed 125 MN/m and 7 MN/m², respectively. The modular ratio is 15, and the density of concrete is 2400 kg/m'. Determine the permissible super-load. (Nottingham) -100 cm- 5cm 15cm O 00- Three 2.25cm bars 60cm Six 2.25 cm bars 000 O 00 7.5cm 25cm

11.9 A reinforced concrete T-beam carries a uniformly distributed super-load on a simply- supported span of 8 m. The stresses in the steel and concrete are not to exceed 125 MN/m and 7 MN/m², respectively. The modular ratio is 15, and the density of concrete is 2400 kg/m'. Determine the permissible super-load. (Nottingham) -100 cm- 5cm 15cm O 00- Three 2.25cm bars 60cm Six 2.25 cm bars 000 O 00 7.5cm 25cm

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A T beam has a concrete and steel strengths of 28 MPa and 420 MPa. The live load is 3830 Pa. while the dead load in addition to concrete's weight is to be 4097. The density of concrete is 2400 kg/m³. The slab is 125 mm thick while the effective depth is 600 mm, the total height of T-beam of 675 mm and the bottom width of T beam is 375 mm. The length of the beam is 7 meters. The center-to-center spacing of beams is 330 cm. Determine the arrangement of main reinforcement bars. Check for clear spacing.
A cast iron tube 3m long is completely filled with concrete and used as a vertical strut. if the external diameter of the tube is 450mm and the wall is 35mm thick, determine the maximum compressive load the composite strut can support if the stress in the concrete is not exceed 2N/mm². By how much should the strut shorten under this load. For cat iron EA= 100GN/m² and for concrete Eb = 10GN/m².
A rectangular beam has a width of 258mm and an effective depth of 600mm. It is reinforced with 4-36mm bars. The compressive strength of the concrete is 28MPa and the yield strength of the steel is 279MPa. The depth of the concrete stress block is ___ mm.
A rectangular beam has a width of 269mm and an effective depth of 600mm. It is reinforced with 4-36mm bars. The compressive strength of the concrete is 28MPa and the yield strength of the steel is 285MPa. The depth of the concrete stress block is ___.
A reinforced concrete beam having a width of 350mm and a overall depth of 600 mm is reinforced with 3-25mm compression bars & 8-25mm tension bars. Concrete covering is 60 mm from the centroid of the bar group. Unit weight of concrete is 23.60 Kn/M3. Concrete Strength, fc’ = 21 MPa, Steel Strength, fy = 415 MPa. Other than the weight of the beam, the beam will support a uniform live load. A. Determine the balanced tension steel area. B. Determine the Ultimate Moment Capacity of the beam. C. Determine the maximum uniform service Live Load that the beam can carry 6.0m and 2.0m
A rectangular cantilever beam has a width of 250mm and an effective depth of 480mm. It is reinforced with 7-25mm bars. The beam is carrying a uniformly distributed dead load of 15kN/m. The compressive strength of the concrete is 21MPa and the yield strength of the steel is 415MPa. The depth of the concrete stress block is?
A doubly reinforced concrete beam of size 250 mm x 500 mm overall depth is reinforced with 2-12 mm dia. bars in compression zone and 3-20 mm dia. bars in tension zone, each at an effective cover of 40 mm. The grade of concrete and steel are M20 and Fe415 respectively. The strain in compression steel will be [Take stress in compression steel as 345 MPa]
A cast iron 3m long is completely filled with concrete and used as a vertical strut. If the externaldiameter of the tube is 450mm and the wall is 35mm thick, determine the maximum compressiveload the composite strut can support if the stress in the concrete is not 2N/mm2? By how muchshould the strut shorten under this load? For cast iron EA= 100GN/m2 and for the concrete EB=10GN/m2?
A cast iron 3m long is completely filled with concrete and used as vertical strut. If the external diameter of a tube is 450mm and the wall is 35mm thick, determine the maximum compressive load, the composite strut can support, if the stress in the concrete is not to exceed 2N/mm2. By how much should the strut shorten under this load. For cast iron EA=100GN/m2 and for concrete EB=10G/m2 9:12 AM /
1.2m 10 cm O 7cm -7cm O This concrete beam has four A-35 steel rods of one centimeter diameter and a square cross section. It experiences a compressive axial load of 200kN. You must calculate the stresses developed in the two components in the figure.
S Areinforced concrete column contains longitudinal steel equal to 1 per cent of net cross-sectional area of the column. Assume modular ratio as 10. The loads carried (using the elastic theory) by the longitudinal steel and the net area of concrete, are P and P, respectively. The ratio expressed as per cent is PdPc C
The maximum load of 200 KN was applied on a cylindrical specimen of concrete. Find the split tensile strength in MPa. Take depth as 150 mm and length as 300 mm.