1- Using the Navier-Stokes equations, determine the pressure gradient along flow, the average velocity, and the discharge for an oil of viscosity 0.02 N.s/m² flowing between two stationary parallel plates 1 m wide maintained 10 mm apart. The velocity midway between the plates is 2 m/s. [-3200 N/m² per m; 1.33 m/s; 0.0133 m³/s]

1- Using the Navier-Stokes equations, determine the pressure gradient along flow, the average velocity, and the discharge for an oil of viscosity 0.02 N.s/m² flowing between two stationary parallel plates 1 m wide maintained 10 mm apart. The velocity midway between the plates is 2 m/s. [-3200 N/m² per m; 1.33 m/s; 0.0133 m³/s]

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

An incompressible fluid (kinematic viscosity, 7.4 x10-7 m²/s, specific gravity, 0.88) is held between two parallel plates. If the top plate is moved with a velocity of 0.5 m/s while the bottom one is held stationary, the fluid attains a linear velocity profile in the gap of 0.5 mm between these plates; the shear stress in Pascals on the surface of top plate is rt of this book may be repro
Determine the kinematic viscosity (Stokes) of oil having the relative density as 0.87. The shear stress at a point in oil is 1.72 N/m2 and the velocity gradient at that point is 0.28 per second. Solution: (i) Viscosity (in Ns/m²) = %3D (ii) Dynamic Viscosity (in poise) = (iii) Mass density of oil (in kg/m³) = %3D iv) Kinematic viscosity (in stokes) = %3D
Oil relation between the shear stress and rate of deformation is given in the figure, If the oil density is =270.5 kg/m what is its viscosity in (m /s)? Oil 20 Rate of deformation, duldy Lenovo K9 Note Al Dual Camera Shear stress, 7
An incompressible fluid (kinematic viscosity, 7.4 x10-7 m²/s, specific gravity, 0.88) is held between two parallel plates. If the top plate is moved with a velocity of 0.5 m/s while the bottom one is held stationary, the fluid attains a linear velocity profile in the gap of 0.5 mm between these plates; the shear stress in Pascals on the surface of top plate is (a) 0.651 x 10-3 (c) 6.51 (b) 0.651 (d) 0.651 x 103
What is the behavior of flow if water at 20 deg C is flowing through a pipe with a radius of 2.067 in at 20 gal/min. Viscosity of water at 20 deg C =1.005 cP Density of water at 20 deg C = 998.23 kg/m3
QA An incompressible fluid (kinematic viscosity, 7.4 x10-7 m2/s, specific gravity, 0.88) is held between two parallel plates. If the top plate is moved with a velocity of 0.5 m/s while the bottom one is held stationary, the fluid attains a linear velocity profile in the gap of 0.5 mm between these plates; the shear stress in Pascals on the surface of top plate is (a) 0.651 x 10-3 (c) 6.51 (b) 0.651 (d) 0.651 x 103
The viscosity of motor oil is 4.79× 10-³ N. s/m², motor oil is used as a lubricant between two machine parts. The variation in velocity of the oil is 1.6 m/s and a maximum shear stress is 62.8 N/m². What is the required spacing between machine parts in millimeter?
Two parallel plates, one moving at 4 m/s and the other fixed, are separated by a 5-mm-thick layer of oil of specific gravity 0.80 and kinematic viscosity 1.25ED4 m2/s. What is the average shear stress in the oil? (a) 80 Pa (b) 100 Pa (c) 125 Pa (d) 160 Pa (e) 200 Pa
2. The velocity distribution for flow over a flat plate is given by u = 3 y- y2, where u is the point velocity in metre per second at a distance y metre above the plate. Determine the shear stress at y = 9 cm. (Nagpur University) [Ans. 0.839 N/m2) distant form a fixed plate, moves at 50 cm/s and requires a force of 1.471 N/m to Assume dynamic viscosity as 8 poise.
At a point in a pipe that lay flat ノ water in the pipe flows at a speed of 9.0 mls and has 6-40x 104 Pa a gaoge pressure is Find the gauge pressure at point 2 of pipe that lower than the first point 8.0 m and the cvoss - se ctional| area of the pipe is double of first point . Answer [1.52x105 Pa]
Determine the kinematic viscosity (Stokes) of oil having the relative density as 0.92. The shear stress at a point in oil is 1.16 N/m2 and the velocity gradient at that point is 0.34 per second. Solution: (i) Viscosity (in Ns/m2) = (ii) Dynamic Viscosity (in poise) = (ii) Mass density of oil (in kg/m3) = iv) Kinematic viscosity (in stokes) =
Determine the pressure gradient (dp/dx) along flow, the average velocity, and the discharge for an oil of viscosity 0.02 N.s/m? flowing between two horizontally stationary parallel plates 1 m wide maintained 10 mm apart. The velocity midway between the plates is 2 m/s. 1-3200 N/m per m; 1.33 mis; 0.0133 m's]