7

what is the difference between the terms fluid power and hydraulics and pneumatics?

### Fluid-Mechanical Circuits   Develop the circuit of a drill in the FluidSim, observing the following requirements:   1.        The design and assembly of the Hydraulic Circuit drive (clamping and working), with the following characteristics:   a.        Sequential operation, put pressure, for the advance and return of the cylinders (according to the proper operation for the device) controlled by a directional 4x3 electric drive way;     2.        The circuit must provide for different speed ranges for drilling work in order to allow different materials to be processed.     Note: Set the safety valve to 55 bar.   *The drill is attached in a figure

Noun Explanation (a)Pressure Control Circuits (b)Hydraulic System of Manipulators (c)The Approach for Design of Hydraulic System

SUBJECT :DJJ40153 PNEUMATIC & HYDRAULIC POLITEKNIK MALAYSIA COURSE:DIPLOMA IN MECHANICAL ENGINEERING Draw the electro hydraulic circuit to controlled two double-acting cylinders and two hydraulic motors fixed displacement and the cylinder is electrically controlled with a single solenoid 4/2 valve THANK YOU SO MUCH

Develop a Technology activity for your Grade 8 technology learners that will develop their understanding of and ability to use the principles of pneumatic/hydraulic systems.

Process Dynamic and Control Question

What would an isometric of the oxygen piping system below look like, where PSA GEN = Pressure Swing Adsorption Oxygen Generator (PSA) COMPs = Compressors POMPs = Pumps HEAT = Heat Exchanger PV = Flow Valves ST TANK = Storage Tank VENT = Vent DR = Drains PSV = Pressure Relief Valve In addition, what would be the possible problems that would require flexibility correction by adding expansion joints, spring supports, anchors and brackets?

Energy Star Washing Machine Model #: GTW500ASN Style: Top Loader Cubic Feet: 4.5 cubic feet Yearly Energy Usage (from Energy Guide): 210 kWh/y Non-Energy Star Washing Machine Model #: GTW465ASN Style: Top Loader Cubic Feet: 4.5 cubic feet Yearly Energy Usage (from Energy Guide): 175 kWh/yr Picture of Appliance: Website Link to Retail Store Purchase Price: (1) $498.00 Yearly Energy Use (in kWh): 175 kWh/yr Energy Cost per Year (Energy usage in kWh from above x .1111 cents/kWh): (3) Cost Recuperation Estimation 1 Picture of Appliance: Website Link to Retail Store Purchase Price: (2) $478.00 Yearly Energy Use (in kWh): 210 kWh/yr Energy Cost per Year (Energy usage in kWh from above x.1111 cents/kWh): (4) Initial Cost Difference: Energy Star Appliance Price (1) - Non-Energy Star Appliance Price (2) Calculation (Show Your Work): This is the original upfront price difference. In other words, how much more money the Energy-Star Appliance costs. 2. Cost Per Year Difference: Non-Energy Star…

Explain the different fluids or systems in an aircraft that needs fluid lines?

Topic: Pneumatic Systems   What are the 7 components of Pneumatic Systems? Explain each with 5 sentences each component at least.

1. Using a sorting device (shown in figure 5), parts are to be transferred from a conveyor belt. By pressing the pushbutton S, the piston rod of a single-acting cylinder pushes the part off the conveyor belt. When the pushbutton is released, the piston rod returns to the retracted end position. (The parts are large). A Fig.5 Sorting Device. 2. Discuss the advantages and disadvantages of hydraulic control system with respect to pneumatics control system. 3. Compare between indirect and direct control circuits.

Analyse operation of the following pneumatic system components specifically without plagiarism from internet: Air compressor, Air receiver tank, Filter, air dryer, Direction control Valve, Regulator, Lubricator

1V2 4 1V1 2 1S12 2 1S2 153 2 Fig. 1(b) (c) Identify two reasons why indirect control would be used instead of direct control in electropneumatics. (d) Name the different types of hydraulic relief valves and state the main operation difference between the two types. Page 2 of 14 SECTION A

Q11. Below are the safety precautions before conducting hydraulic workshop except: a. Ensuring the all the equipment are available and in good condition. b. Ensuring lab-sheet with instruction is given. c. Ensuring the air-conditional system is working during conducting the lab works. d. Ensuring there are enough lighting and air ventilation when conducting the lab works Q12. Below are the advantages of hydraulic system, please select the best advantage when you applied hydraulic system at a bulldozer? a. Ability to cater heavy load b. Slow and precision motion. c. Easy to spot leakages of a hydraulic system d. Simpler and easier to maintain due to less system Q13. Which statement belowis the best to explain the application of pressure relief valve in automotive braking system. When braking, pressure relief valve is used to release the force to the braking pad b. When braking, the pressure relief value is used to increase the force to the braking pad c. When braking, the pressure…

Match the correct advantage with the fluid power system.

i)Explain the types of components used to control the leakage of fluid in internal and externaloperations of the hydraulic system?

Briefly describe pump selection using characteristic curves provided by the pump manufacturer.

State 5 main faults and hazards in the pressurized system andthe way to avoid them. Also, state the different steps withpictures if possible the way the vane pump can be repaired. Thencompare the different safety issues between pneumatic and hydraulicas there are differences in the pressure. Finally, use thefault-finding technique to show how to solve the lack of pressureto the cylinder for a pneumatic circuit and the importance of maintenance to avoid these problems in the future.

Compare Mechanical Hydraulic and Electrical Hydraulic?

1. Write in detail about working of any one hydraulic system application in construction area with neat diagram. 2. Illustrate the comparison between Electro-Pneumatic and Electro-Hydraulic Power system with application examples.

15

Instrumentation & Measurements This homework measures your capability to design/analyze various components/variables of ameasurement system based on what you have studied. Question 1 Attached.

What makes turbulent mixing complicated?A. The Reynolds number cannot be calculated when the flow is turbulent.B. The large eddies formed during mixing is part of the distorted laminar fluid elements.C. Low frequency velocity fluctuations contribute to the complexity of such analysis.D. There are no available correlations that can relate the Reynolds number and friction factor.

I can emphasize that I can wait as long as possible, you don't have to worry about the time. if you think you need any extra information, let me know, but please do not cancel the question. ------ Company Z has the following historical information about sales for one of its hydraulic pump models. (PICTURE OF THE PERIOD AND YEARS) On the other hand, the manufacturing process used by Company Z is sequential* and has the following characteristics: (THE OTHER IMAGE) * Sequential; in the sense that the output of Mi is the input of Mi+1.** In any order; in the sense that they can be interchanged, e.g. MA -> MB or MB -> MA. The company's operating costs are as follows: Cost per final unit produced "defect free": $100 Cost per final unit produced "with defects": $150 Cost per excess inventory (units "free of defects"): $50 Cost per inventory shortage ("defect free" units): $200 Revenue per final "defect free" unit produced and sold: $250 We have the following operating conditions: - Any…

i need the answer quickly

Answer it pls.

(b) Give one example of a ratchet & pawl in design of any mechanical system? Give insight regarding application areas of hydraulic and pneumatic actuators?

1.A technician is  traversing a duct and obtains the following 8 velocity readings: 500 fpm, 400 fpm, 375 fpm, 625 fpm, 275 fpm,360 fpm,420 fpm, and 575 fpm. What is the velocity value that will be used for system calculations?

Example procedure of Level, Flow, Pressure and Temperature control system in mechanical engineering

when would you use a pressure transducer coupled to an oscilloscope