VEC MECH 180-DAT EBOOK ACCESS(STAT+DYNA)
VEC MECH 180-DAT EBOOK ACCESS(STAT+DYNA)
12th Edition
ISBN: 9781260916942
Author: BEER
Publisher: MCG
bartleby

Videos

Question
Book Icon
Chapter 18.3, Problem 18.129P
To determine

The precession axis, rates of precession, and the spin rate of the satellite after the impact.

Expert Solution & Answer
Check Mark

Answer to Problem 18.129P

The precession along x, y, and z axis (θx,θy,andθz) is 125°_, 36.4°_, and 80.7°_ respectively.

The precession rate (ϕ˙) is 0.949rad/s_.

The spin rate (ψ˙) is 0.16rad/s_.

Explanation of Solution

Given information:

The weight of geostationary satellite (W) is 800 lb.

The angular velocity of the satellite (ω0) is (1.5rad/s)j.

The weight of a meteorite W is 6 oz.

The travelling velocity of the meteorite v0 is (1,600ft/s)i+(1,300ft/s)j+(4,000ft/s)k.

The distance value b is 20 in..

The radii of gyration of the satellite along x, y, and z direction (k¯x, k¯y, and k¯z) is 28.8 in., 32.4 in., and 28.8 in. respectively.

Calculation:

Determine the mass of the satellite (m).

m=Wg

Here, g is the acceleration due to gravity.

Substitute 800 lb for W and 32.2ft/s2 for g.

m=80032.2=24.845lbs2/ft

Determine the principal moment of inertia along x axis.

I¯x=mk¯x2

Substitute 24.845lbs2/ft for m and 28.8 in. for k¯x.

I¯x=24.845×(28.8in.×1ft12in.)2=143.11lbs2ft

Determine the principal moment of inertia along y axis.

I¯y=mk¯y2

Substitute 24.845lbs2/ft for m and 32.4 in. for k¯y.

I¯y=24.845×(32.4in.×1ft12in.)2=181.12lbs2ft

Determine the principal moment of inertia along z axis.

I¯z=mk¯z2

Substitute 24.845lbs2/ft for m and 28.8 in. for k¯z.

I¯z=24.845×(28.8in.×1ft12in.)2=143.11lbs2ft

Determine the mass of the meteorite m.

m=Wg

Substitute 6 oz for W and 32.2ft/s2 for g.

m=6oz×0.0625lb1oz32.2=0.0116lbs2/ft

Determine the initial moment of meteorite (p0).

p0=mv0

Substitute 0.0116lbs2/ft for m and (1,600ft/s)i+(1,300ft/s)j+(4,000ft/s)k for v0.

p0=0.01164×((1,600ft/s)i+(1,300ft/s)j+(4,000ft/s)k)=(18.62lbs)i+(15.13lbs)j+(46.56lbs)k

Consider that the position of the satellite mass center plus the meteorite is essentially that of the satellite alone.

Determine the position of the point B relative to the mass center.

rB/G=xiyj

Here, x is the horizontal distance and y is the vertical distance.

Substitute 42 in. for x and 20 in. for y.

rB/G=(42in.×1ft12in.)i(20in.×1ft12in.)j=(3.5ft)i(1.667ft)j

The angular velocity of satellite before impact (ω0) is (1.5rad/s)j.

The angular velocity of satellite before impact along x, y, and z axis is (ω0)x=0, (ω0)y=1.5rad/s, and (ω0)z=0.

Determine the angular momentum of satellite–meteorite system before impact (HG)0.

(HG)0=I¯yω0j+rB/G×p0

Substitute 181.12lbs2ft for I¯y, 1.5rad/s for ω0, (3.5ft)i+(1.667ft)j for rB/G, and (18.62lbs)i+(15.13lbs)j+(46.56lbs)k for p0.

(HG)0=(181.12×1.5)j+|ijk3.51.667018.6215.1346.56|={271.68j+i(1.667×46.560)j(3.5×46.560)+k(3.5×15.13(1.667×18.62))}=271.68j77.61i162.96j+21.92k=(77.61i+108.72j+21.92k)lbsft

Principle of impulse and momentum for satellite–meteorite system:

The value of moments about G is (HG)1=(HG)0=HG.

The expression for HG is HG=I¯xωxi+I¯yωyj+I¯zωzk.

Determine the angular velocity about x axis.

ωx=(HG)xIx

Substitute 77.61lbsft for (HG)x and 143.11lbs2ft for Ix.

ωx=77.61143.11=0.5423rad/s

Determine the angular velocity about y axis.

ωy=(HG)yIy

Substitute 108.72lbsft for (HG)y and 181.12lbs2ft for I¯y.

ωy=108.72181.12=0.6rad/s

Determine the angular velocity about z axis.

ωz=(HG)zIz

Substitute 21.92lbsft for (HG)z and 143.11lbs2ft for I¯z.

ωz=21.92143.11=0.153rad/s

Determine the vector format of angular velocity using the relation;

ω=ωxi+ωyj+ωzk

Substitute 0.5423rad/s for ωx, 0.6rad/s for ωy, and 0.153rad/s for ωz.

ω=(0.5423rad/s)i+(0.6rad/s)j+(0.153rad/s)k

Determine the magnitude of the angular velocity ω.

ω=ωx2+ωy2+ωz2

Substitute 0.5423rad/s for ωx, 0.6rad/s for ωy, and 0.153rad/s for ωz.

ω=(0.5423)2+(0.6)2+(0.153)2=0.823rad/s

Determine the magnitude of angular momentum HG using the relation.

HG=(HG)x2+(HG)y2+(HG)z2

Substitute 77.61lbsft for (HG)x, 108.72lbsft for (HG)y, and 21.92lbsft for (HG)z.

HG=(77.61)2+(108.72)2+(21.92)2=135lbsft

Motion after impact:

The moment of inertia about x and y axis is equal, the body moves as an axisymmetrical body with the y axis as the symmetry axis.

The moment of inertia about the symmetry axis is I=I¯y=181.12lbs2ft.

The moment of inertia about a transverse axis through G is I=I¯x=I¯z=143.11lbs2ft.

The precession is retrograde when the value of I>I.

Determine the angle θ about x axis.

cosθx=(HG)xHG

Substitute 77.61lbsft for (HG)x and 135lbsft for HG.

cosθx=77.61135θx=cos1(0.575)θx=125°

Determine the angle θ about y axis.

cosθy=(HG)yHG

Substitute 108.72lbsft for (HG)y and 135lbsft for HG.

cosθy=108.72135θy=cos1(0.805)θy=36.4°

Determine the angle θ about z axis.

cosθz=(HG)zHG

Substitute 21.92lbsft for (HG)z and 135lbsft for HG.

cosθz=21.92135θz=cos1(0.162)θz=80.7°

Thus, the precession along x, y, and z axis (θx,θy,andθz) is 125°_, 36.4°_, and 80.7°_ respectively.

The angle θ between the spin axis (y–axis) and the precession axis remains constant θ=θy=36.4°.

Determine the angle γ between the angular velocity and the spin axis.

cosγ=ωyω

Substitute 0.6rad/s for ωy and 0.823rad/s for ω.

cosγ=0.60.823γ=cos1(0.729)γ=43.2°

Determine the value of (γθ).

Substitute 43.2° for γ and 36.4° for θ.

(γθ)=43.2°36.4°=6.8°

Draw the free body diagram of precession and spin axis as in Figure (1).

VEC MECH 180-DAT EBOOK ACCESS(STAT+DYNA), Chapter 18.3, Problem 18.129P , additional homework tip  1

Draw the free body diagram of triangle of vector addition as in Figure (2).

VEC MECH 180-DAT EBOOK ACCESS(STAT+DYNA), Chapter 18.3, Problem 18.129P , additional homework tip  2

Write the relation between the angles using the sine law.

ϕ˙sinγ=ψ˙sin(γθ)=ωsinθ

Determine the precession rate (ϕ˙) using law of sines.

ϕ˙=ωsinγsinθ

Substitute 0.823rad/s for ω, 43.2° for γ, and 36.4° for θ.

ϕ˙=0.823×sin43.2°sin36.4°=0.949rad/s

Therefore, the precession rate (ϕ˙) is 0.949rad/s_.

Determine the rate of spin ψ˙ using the relation.

ψ˙=ωsin(γθ)sinθ

Substitute 0.823rad/s for ω, 6.8° for (γθ), and 36.4° for θ.

ψ˙=0.823sin6.8°sin36.4°=0.16rad/s

The precession is retrograde due to value of γ is greater than the angle θ.

Therefore, the spin rate (ψ˙) is 0.16rad/s_.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
A 5.32-kg disk A of radius 0.445 m initially rotating counter-clockwise at 436 rev/min is engaged with a 6.72-kg disk B of radius 0.275 m initially rotating clockwise at 528 rev/min, where the moment of inertia of a disk is given as I = ½ mi?. Determine their combined angular speed (in rpm) and direction of rotation after the meshing of the two disks. Remember to show clearly the equations that you use!!'
A 200 kg satellite has its center of mass at point G. Its radii of gyration about the z', x', y' axes are k= 300 mm, kx = ky = 500 mm. At the instant shown, the satellite rotates about the x', y', and z' axes with the angular velocity shown, and its center of mass G has a velocity of VG =( -250i + 200j + 120k) m/s. Determine the kinetic energy of the satellite at this instant. z, z = 1250 rad/s D = 600 rad/s w,' = 300 rad/s 800 mm
A driver starts his car with the door on the passenger’s side wide open ( _ θ = 0). The 100-lb door has a centroidal radius of gyration k = 12 in. and its mass center is located at a distance r = 20 in. from its vertical axis of rotation. Knowing that the driver maintains a constant acceleration of 4 ft/s2 , determine the angular velocity of the door as it slams shut (θ = 90°).

Chapter 18 Solutions

VEC MECH 180-DAT EBOOK ACCESS(STAT+DYNA)

Ch. 18.1 - Prob. 18.12PCh. 18.1 - Prob. 18.13PCh. 18.1 - Two L-shaped arms each have a mass of 5 kg and are...Ch. 18.1 - For the assembly of Prob. 18.15, determine (a) the...Ch. 18.1 - Prob. 18.17PCh. 18.1 - Determine the angular momentum of the shaft of...Ch. 18.1 - Prob. 18.20PCh. 18.1 - Prob. 18.21PCh. 18.1 - Prob. 18.22PCh. 18.1 - Prob. 18.23PCh. 18.1 - Prob. 18.24PCh. 18.1 - Prob. 18.25PCh. 18.1 - Prob. 18.26PCh. 18.1 - Prob. 18.27PCh. 18.1 - Prob. 18.28PCh. 18.1 - A circular plate of mass m is falling with a...Ch. 18.1 - Prob. 18.30PCh. 18.1 - Prob. 18.31PCh. 18.1 - Determine the impulse exerted on the plate of...Ch. 18.1 - The coordinate axes shown represent the principal...Ch. 18.1 - Prob. 18.34PCh. 18.1 - Prob. 18.37PCh. 18.1 - Prob. 18.38PCh. 18.1 - Prob. 18.39PCh. 18.1 - Prob. 18.40PCh. 18.1 - Prob. 18.41PCh. 18.1 - Prob. 18.42PCh. 18.1 - Determine the kinetic energy of the disk of Prob....Ch. 18.1 - Determine the kinetic energy of the solid...Ch. 18.1 - Prob. 18.45PCh. 18.1 - Determine the kinetic energy of the disk of Prob....Ch. 18.1 - Determine the kinetic energy of the assembly of...Ch. 18.1 - Determine the kinetic energy of the shaft of Prob....Ch. 18.1 - Prob. 18.49PCh. 18.1 - Prob. 18.50PCh. 18.1 - Determine the kinetic energy lost when edge C of...Ch. 18.1 - Prob. 18.52PCh. 18.1 - Prob. 18.53PCh. 18.1 - Determine the kinetic energy of the space probe of...Ch. 18.2 - Determine the rate of change HG of the angular...Ch. 18.2 - Prob. 18.56PCh. 18.2 - Determine the rate of change HG of the angular...Ch. 18.2 - Prob. 18.58PCh. 18.2 - Prob. 18.59PCh. 18.2 - Determine the rate of change HG of the angular...Ch. 18.2 - Prob. 18.61PCh. 18.2 - Determine the rate of change HD of the angular...Ch. 18.2 - Prob. 18.63PCh. 18.2 - Prob. 18.64PCh. 18.2 - A slender, uniform rod AB of mass m and a vertical...Ch. 18.2 - Prob. 18.66PCh. 18.2 - The assembly shown consists of pieces of sheet...Ch. 18.2 - The 8-kg shaft shown has a uniform cross-section....Ch. 18.2 - Prob. 18.69PCh. 18.2 - Prob. 18.70PCh. 18.2 - Prob. 18.71PCh. 18.2 - Knowing that the plate of Prob. 18.66 is initially...Ch. 18.2 - Prob. 18.73PCh. 18.2 - The shaft of Prob. 18.68 is initially at rest ( =...Ch. 18.2 - The assembly shown weighs 12 lb and consists of 4...Ch. 18.2 - Prob. 18.76PCh. 18.2 - Prob. 18.79PCh. 18.2 - Prob. 18.80PCh. 18.2 - Prob. 18.81PCh. 18.2 - Prob. 18.82PCh. 18.2 - The uniform, thin 5-lb disk spins at a constant...Ch. 18.2 - The essential structure of a certain type of...Ch. 18.2 - A model of a type of crusher is shown. A disk of...Ch. 18.2 - Prob. 18.86PCh. 18.2 - Prob. 18.87PCh. 18.2 - The 2-lb gear A is constrained to roll on the...Ch. 18.2 - Prob. 18.89PCh. 18.2 - Prob. 18.90PCh. 18.2 - 18.90 and 18.91The slender rod AB is attached by a...Ch. 18.2 - The essential structure of a certain type of...Ch. 18.2 - The 10-oz disk shown spins at the rate 1 = 750...Ch. 18.2 - Prob. 18.94PCh. 18.2 - Prob. 18.95PCh. 18.2 - Two disks each have a mass of 5 kg and a radius of...Ch. 18.2 - Prob. 18.97PCh. 18.2 - Prob. 18.98PCh. 18.2 - A thin disk of mass m = 4 kg rotates with an...Ch. 18.2 - Prob. 18.101PCh. 18.2 - Prob. 18.102PCh. 18.2 - A 2.5-kg homogeneous disk of radius 80 mm rotates...Ch. 18.2 - A 2.5-kg homogeneous disk of radius 80 mm rotates...Ch. 18.2 - For the disk of Prob. 18.99, determine (a) the...Ch. 18.3 - A uniform thin disk with a 6-in. diameter is...Ch. 18.3 - A uniform thin disk with a 6-in. diameter is...Ch. 18.3 - Prob. 18.109PCh. 18.3 - The top shown is supported at the fixed point O...Ch. 18.3 - Prob. 18.111PCh. 18.3 - Prob. 18.112PCh. 18.3 - Prob. 18.113PCh. 18.3 - A homogeneous cone with a height of h = 12 in. and...Ch. 18.3 - Prob. 18.115PCh. 18.3 - Prob. 18.116PCh. 18.3 - Prob. 18.117PCh. 18.3 - The propeller of an air boat rotates at 1800 rpm....Ch. 18.3 - Prob. 18.119PCh. 18.3 - Prob. 18.120PCh. 18.3 - Prob. 18.121PCh. 18.3 - Prob. 18.122PCh. 18.3 - Prob. 18.123PCh. 18.3 - A coin is tossed into the air. It is observed to...Ch. 18.3 - Prob. 18.125PCh. 18.3 - Prob. 18.126PCh. 18.3 - Prob. 18.127PCh. 18.3 - Prob. 18.128PCh. 18.3 - Prob. 18.129PCh. 18.3 - Prob. 18.130PCh. 18.3 - Prob. 18.131PCh. 18.3 - Prob. 18.132PCh. 18.3 - Prob. 18.133PCh. 18.3 - Prob. 18.134PCh. 18.3 - Prob. 18.135PCh. 18.3 - A homogeneous disk with a radius of 9 in. is...Ch. 18.3 - The top shown is supported at the fixed point O....Ch. 18.3 - Prob. 18.138PCh. 18.3 - Prob. 18.139PCh. 18.3 - Prob. 18.140PCh. 18.3 - Prob. 18.141PCh. 18.3 - Prob. 18.142PCh. 18.3 - Consider a rigid body of arbitrary shape that is...Ch. 18.3 - Prob. 18.144PCh. 18.3 - Prob. 18.145PCh. 18 - Three 25-lb rotor disks are attached to a shaft...Ch. 18 - Prob. 18.148RPCh. 18 - Prob. 18.149RPCh. 18 - A uniform rod of mass m and length 5a is bent into...Ch. 18 - Prob. 18.151RPCh. 18 - Prob. 18.152RPCh. 18 - Prob. 18.153RPCh. 18 - Prob. 18.154RPCh. 18 - Prob. 18.155RPCh. 18 - The space capsule has no angular velocity when the...Ch. 18 - A homogeneous rectangular plate of mass m and...Ch. 18 - The essential features of the gyrocompass are...
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
Elements Of Electromagnetics
Mechanical Engineering
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Oxford University Press
Text book image
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:9780134319650
Author:Russell C. Hibbeler
Publisher:PEARSON
Text book image
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:9781259822674
Author:Yunus A. Cengel Dr., Michael A. Boles
Publisher:McGraw-Hill Education
Text book image
Control Systems Engineering
Mechanical Engineering
ISBN:9781118170519
Author:Norman S. Nise
Publisher:WILEY
Text book image
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:9781337093347
Author:Barry J. Goodno, James M. Gere
Publisher:Cengage Learning
Text book image
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:9781118807330
Author:James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:WILEY
Mechanical SPRING DESIGN Strategy and Restrictions in Under 15 Minutes!; Author: Less Boring Lectures;https://www.youtube.com/watch?v=dsWQrzfQt3s;License: Standard Youtube License