Two spheres, each 1.2 m in diameter, weigh 4 kN and 12 kN, respectively. They are connected with a short rope and placed in water. What is the tension in the rope and what portion of the lighter sphere protrudes from the water.

Two spheres, each 1.2 m in diameter, weigh 4 kN and 12 kN, respectively. They are connected with a short rope and placed in water. What is the tension in the rope and what portion of the lighter sphere protrudes from the water.

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.116P: Each of the three gates has a constant width 1: (perpendicular to the paper). Calculate the force P...

See similar textbooks

Related questions

Q: Determine the hydrostatic force and its location by (a)integration method and (b)formula method. 3m ...

Q: 1. Make a control volume around the whole power plant in Fig. 1.1 and list the flows of mass and ene...

A: Given Power plant To find Control volume Mass flow Energy flow

Q: In the process of charging XT the accumulator piston (diameter D=120 mm and mass m=0,6 kg) moved upw...

A: Given:D=120 mmm=0.6 Kgx=120 mmP=10 MPa

Q: Steam at 200 deg. C and with an entropy oF 5. G105 kjlkg-k expands isothermally to 0.515 Mpa. For 5k...

Q: Air enters a compressor operating at steady-state at 1 atm with a specific enthalpy of h1 = 224 kJ/k...

Q: or gas R When the gas is taken from state P to state R by stages PQ and QR, 8 kJ of heat are absorbe...

Q: interpolations/extrapolations: NO Calculator Technique and Applications. 1. Five kilo of water vapou...

A: As per the guidelines of BARTLEBY we are subjected to solve only one question at a time. Please repo...

Q: Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown...

Q: Saponification is a process wherein soap is added to a certain type of oil to produce grease. One su...

Q: A central heating system from a house consists of 50m of 15mm outside diameter copper pipe with a wa...

Q: A jet of water from a fixed nozzle has a diameter of 25 mm and strikes a flat plate at an angle of 3...

Q: A reducing elbow is used to deflect water at a rate of 14kg/s in a horizontal pipe upwards through 3...

Q: EXAMPLE 1: DETERMINE THE RESULTANT COUPLE MOMENT 15 10 3 m 5 4 3 30 3 m A 1m 30 4 3 10 15 B.

A: Moment = Force X Perpendicular Distance Let Clockwise moment is positive. Counter clockwise moment i...

Q: Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown...

Q: report about gas turbines in racing cars. I need more information for (powerpoint).

A: TURBINE: A turbine (/ˈtɜːrbaɪn/or/ˈtɜːrbɪn/) (from the Greek τύρβη, tyrbē, or Latin super, meaning v...

Q: The point of application where the total weight can be expected to be concentrated if the gravitatio...

A: As per given We have to choose option and explain it

Q: at is the final temperature after compression of a diesel cycle if the initial temperature is 30.74 ...

A: Given:T1=30.74°C=0.08r

Q: Problem 2: The figure below shows a fabricated assembly made from three different sizes of standard ...

A: The flow rate through larger pipe, Q=0.072 m3/sThe velocity in 50mm tube, V1=12.0 m/sWall thickness ...

Q: Calculate the hourly energy cost for pumping riverwater at 288.706K, from a river to a hilltop, thro...

Q: A cylindrical storage tank with diameter of 4m and a length of 10 m will hold a fluid whose temperat...

Q: 14. For certain ideal gas, R = 0.32 KJ and c,= 1160 kgm-K - (a) Find c, and k. (b) kgm-K If 6 kg of ...

A: Given:R=0.32 KJ/Kg.KCp=1.160 KJ/Kg.Km=6 KgV1=2.1 m3P1=0.7 MPaT2=830 K

Q: A 3.0m-long, 0.45-cm-diameter electrical wire extends across a room at 61°F, as shown. Heat is gener...

A: Given data: L=3 md=0.45 cmT1=61°F=289.26 KT2=306°F=425.37 KV=70 VI=1.73 A Need to determine the heat...

Q: The cross-sectional area of a wide-flange I-beam has the dimensions shown. Obtain a close approximat...

A: Given: The approximated value of moment of inertia about x-axis, Ix = 654 in^4

Q: am at 9000 kPa and 600°C passes through a throttling process so that the pressure is suddenly reduce...

A: at 9000 KPa 600 Celcius from superheated steam table we get H1 3634.1 kJ/kg V1 0.0428610 m3...

Q: A 2459 lb car is moving up a 13 degree incline as shown. If it took 7.1 s for the car to decelerate ...

Q: Steam at 200 deg. C and with isothemally to 0.515 Mpa. For 5kg. Find : a. As, AH, AU b. Q an entropy...

Q: Air at 200 kPa, 100°C, and Mach number Ma = 0.8 lows through a duct. Calculate the velocity and the ...

Q: a reaction turbine is

A: NEED TO FIND SPECIFIC SPEED ( REACTION TURBINE)

Q: Determine the bending moment acting at each of the following locations: (a) x = 3.5- m (i.e., just t...

Q: 4. Using the figure below, find the time it takes for tank 2 to increase water level by 2m. (C = 0.6...

A: Given data: Area of tank 1 = π a b = π x 2 x 3 = 6πArea of tank 2 = π4 x 42 = 4πInitial height diffe...

Q: Derive the translational and rotational kinematics equations for a 3-2-3 rotation sequence. The angl...

A: TRANSLATIONAL AND ROTIONAL MOTION translational Motion: Translational movement is movement that incl...

Q: Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown...

Q: Determine the moments of inertia of the shaded area about the x- and y-axes. Also determine the pola...

A: Calculating Moment of inertia with respect to X axis tan(α) = 0.49 h/h α= 26.10 °=0.455 radians Mom...

Q: Steam is contained in a 2-L volume at a pressure of 2.0 MPa and a temperature of 400°C. If the press...

A: Givenvolume of the steam v=2ltr=2×10-3 m3pressure, P=2MPatemperature T=400oCheat added Q=20kJ

Q: Determine the shear force acting at each of the following locations: (a) x = 0+ m (i.e., just to the...

Q: 4. The cross sectional area of each member of the truss is 1.6 in?. Calculate the stresses in member...

Q: In a single pass drilling operation, a through hole of 15mm diameter is to be drilled in a steel pla...

A: Given: The diameter of hole, d = 15 mm The thickness of plate, h = 50 mm The spindle speed, N = 500 ...

Q: Crude oil has a density of 856kg/m3 and dynamic viscosity of 0.0072Pa-s flow through a 60-mm diamete...

Q: On a weather station, an altimeter was calibrated to 35 in Hg while the documented density at sea le...

A: The conrinuity equation gives-A1V1=A2V2A1=inlet AreaV1=inlet velocityA2=exit areaV2=exit velocityA1=...

Q: Determine the hydrostatic force and its location by (a)integration method and (b)formula method.

Q: Details pertaining to an orthogonal metal cutting process are given below Chip thickness ratio 0.4 U...

Q: Consider two autonomous vehicles driving in two adjacent lanes as shown in the figure. One is at the...

A: Since we will solve the up to 3 subparts so we will solve first 3. Please resubmit the question by s...

Q: Alm that He Cafle

Q: Determine the magnitude and direction of the force on the radial gate of Figure 6a. AB has a length ...

A: The resultant force created by the pressure loading of a liquid acting on submerged surfaces is know...

Q: PROBLEM 1: Determine the resultant (magnitude and direction) of the three forces acting on the gusse...

Q: he beginning of compression in an ideal dual combustion cycle, the working fluid is 2 lbs. of air at...

Q: find The reactions at Aand B & Nim 12盤ん1 30 1.Sm 个

A: The free body diagram of the beam is given below,

Q: •4-101. Determine the magnitudes of couple moments M1, M2, and M3 so that the resultant couple momen...

Q: Find discharge velocity

A: Given; A large with a nozzle attached contains three immiscible inviscid fluids as shown.Assuming t...

Q: 1 kg of an ideal gas is heated at constant pressure p. Given that this results in an increase in vol...

A: To select the correct option.

Concept explainers

Slope and Deflection

The slope in a deflected beam is described as an angle in radians made by the tangent of the section with the original axis of the beam. The deflection at any point on the axis of the beam is defined as the lateral displacement of the point before and after loading.

Question

Two spheres, each 1.2 m in diameter, weigh 4 kN
and 12 kN, respectively. They are connected with a
short rope and placed in water. What is the tension
in the rope and what portion of the lighter sphere
protrudes from the water.

NOTE: CLEAR HANDWRITTEN SOLUTION

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The weight of the cylindrical tank is negligible in comparison to the weight of water it contains (water weighs 62.4lb/ft3). The coefficient of static friction between the tank and the horizontal surface is s. (a) Assuming a full tank, find the smallest force P required to tip the tank, and the smallest s that would allow tipping to take place. (b) If the force P = 200 lb initiates tipping, determine the depth of water in the tank.
Each of the three gates has a constant width 1: (perpendicular to the paper). Calculate the force P required to maintain each gate in the position shown. Express your answers in terms of b, c, h, and (the weight density of the fluid).
3. Determine the vertical and horizontal forces on the cylinder shown in Fig. below. The cylinder is in equilibrium .The horizontal force can be calculated as the sum of forces length. The due to the oil and due to the water on projected area. Consider 1 m horizontal force on AB and BC are equal and opposite. F D E Oil 1.25 m S-0.91 1.25 m Water C
NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part A long trough is supported by a continuous hinge along its lower edge and by a series of horizontal cables attached to its upper edge. 20 in. 20 in. The tension in each cable is [ Problem 05.094.b - Find the tension in the support cables Determine the tension in each of the cables when the trough is completely full of water if r-27 in. 20 in. lb.
The instrument package shown below weighs 254.4 N. Calculate the tension in the cable in kN if the package is completely submerged in seawater having a specific weight of 10.58 kN/m3. Water surface 300- mm 600mm 450 mm Cable Sea bottom
3. The linkage for a hydraulic jack is shown. If the load on the jack is 2000 lb, determine the pressure acting on the fluid when the jack is in the position shown. All lettered points are pins. The piston at H has a cross-sectional area of A = 2 in?. Hint: First find the force F acting along link EH. The pressure in the fluid is p=F/A. | 2000 lb 2 in. 2 in. 30 in. 60° 5 in.
Two spheres, each 1.20 m in diameter, weighs 4kN and 12kN respectively. They are connected with a short rope and placed in water. Find the tension in the rope in kN
I need help finding the force on a flat door at the bottom of the vessel that has a cross-sectional area of 0.5 m2.
1. In the set-up shown, a rectangular gate, ABCD, is used to store layers of oil and water. The weight of the gate is 4 kN and the force exerted by the stopper on the gate is measured to be 80 kN. Sketch the pressure diagram on the rectangular gate. No need to put the expressions for pressures. Draw the free body diagram of the rectangular gate. Label all external forces. Calculate the moment done by the resultant hydrostatic force about the hinge. What is the pressure on the oil-water interface? Determine the weight of the block. Pressurized air Block 0.5 m ...... Oil, SG = 0.8 1 m ...... 0.8 m Water Hinge 1.2 SG = 1.26 2.4 m 130 degrees stopper 2 m
The wooden board is hinged to the wall of the tank.
In the set-up shown, a rectangular gate, ABCD, is used to store layers of oil and water. Theweight of the gate is 4 kN and the force exerted by the stopper on the gate is measured tobe 30 kN.Draw the free body diagram of the rectangular gate.
Find the force P required to hold the gate in the position as shown in the figure. The gate is 5 meters wide.