Q1: The horizontal rigid beam ABCD is supported byvertical bars BE and CF and is loaded by vertical forcesP, = 400 kN and P2 = 360 kN acting at points A and D,respectively (see figure). Bars BE and CF are made ofsteel (E = 200 GPa) and have cross-sectional areasABE = 11,100 mm and Acr = 9,280 mm. The distancesbetween various points on the bars are shown in the figure.Determine the vertical displacements & and &p ofpoints A and D, respectively.15m 1.5 m 2.1 m-P1 = 400 kN2.4 mP2 = 360 kN0.6 ml

Answered: Image /qna-images/answer/0bb302df-e175-47e5-90cb-21be8bf20f58.jpg

Q1: The horizontal rigid beam ABCD is supported by vertical bars BE and CF and is loaded by vertical forces P 400 kN and P 360 kN acting at points A and D, respectively (see figure). Bars BE and CF are made of steel (E ARE between various points on the bars are shown in the figure. Determine the vertical displacements and op of points A and D, respectively. 200 GPa) and have cross-sectional areas 11,100 mm and Acr-9,280 mm. The distances 15m 1.5 m –2.1 m - B

Q1: The horizontal rigid beam ABCD is supported by vertical bars BE and CF and is loaded by vertical forces P 400 kN and P 360 kN acting at points A and D, respectively (see figure). Bars BE and CF are made of steel (E ARE between various points on the bars are shown in the figure. Determine the vertical displacements and op of points A and D, respectively. 200 GPa) and have cross-sectional areas 11,100 mm and Acr-9,280 mm. The distances 15m 1.5 m –2.1 m - B

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Please read and follow the direction. Solve only Beam 3.
Consider the pin-jointed plane truss shown in the figure (not drawn to scale). Let Rp, Ro, and R denote the vertical reactions (upward positive) applied by the supports at P, Q, and R, respectively, on the truss. The correct combination of (Rp, Ro, RR) is represented by 2 m 3 m TIÌTT 7TTTT Q 30 kN 3 m 3 m 3 m P.
Use the method of virtual work and determine the vertical displacement of joint B of the truss. Each steel member has a cross-sectional area of 300 mm2 E = 200 GPa. 5 m 3 m 80 kN 3 m -4 m-
18. Replace the two forces shown by a force-couple system with the force acting at O. 360 mm 270 mm 50 N A 300 90 N
Problem 1 An angle bracket ABC is restrained by a high strength steel wire CD, and it supports a load P at A, as shown in figure. The strength properties of the wire and the shear pin at B are o, = 350 MPa (wire), and t,=300 MPa (pin at B). If the wire and pin are to be sized to provide a factor of safety of the wire F.S = 3.3 and a factor of safety of the pin F.S = 3.5. What are the required diameters of the wire (to the nearest mm) and the pin (to the nearest mm)? dw D 90 mm B 20° 100 mm View a-a of B P = 2 kN
nt Paragraph Styles Ec A beam ACB is supported by a collar at A and rest on a smooth surface at B. The collar is fixed to the rod and is free to slide over the fixed inclined rod. The beam is subjected to point force PC = 10 kips and distributed forces acting on the span AC as shown in the figure. The maximum magnitude of the distributed force is wo = 2 kips/ft. a. Draw the freebody diagram of the beam ACB. b. Calculate the reactions at A and B. Please neglect the depth/thickness of the beam. Length of AC is 10 ft, Length of CB is 3 ft D. Focus
A vertical bar consists of three prismatic segments A₁ (between A and B), A₂ (between B and D), and A3 (between D and E) with cross-sectional areas of 6000 mm², 5000 mm², and 4000 mm², respectively. The bar is made of steel with E = 200 GPa. Ignore the weight of the bar, and determine: (a) Reaction force at the fixed support. (b) Axial force between A and B. (c) Axial force between B and C. (d) Axial force between C and D. (e) Axial force between D and E.. (f) Calculate the displacements at points B, D, and E. (Show work below in detail; No points will be given if detailed derivations were not provided.) 500 mm PB = 50 N B 250 mm + Pc=250 N 250 mm D 500 mm E PE=350 N
Compute vertical displacement of E if: 100 kips acts dowmward at A A unit force acts down at E
Determine the horizontal and vertical deflections at D for the frame shown below (consider E, I constant and neglect axial deformation). P |2L A В C 4L
Find the support reactions at joints A and D, then solve for internal forces at the top of member BC. Use numerical properties given. Use attached Table 1-1 for your reference. 90 D C 91 E b d 4 В a FB MA A a = 4 m b = 2m C = 3.5m d = 3 m MA = 380 N.m FB = 250 N 9o = 100 N/m 91 = 150 N/m %3D 3.
An extruded beam has the cross-section shown in the figure. A vertical shear force, V of 110 kN is acting at the shear center of the section. Uniform thickness is 9mm. 72 50 192 50 Use I = 22.055484 × 10° mm' Estimate the total vertical shear (kN) resisted by the web CD. A 117 B 110 C 103 D 96 The distance from the axis of the web to the shear center is most nearly equal to. A 35 mm B 20 mm 15 mm D 40 mm
The cantilever beam shown is subjected to a concentrated load of P. The cross-sectional dimensions of the wide-flange shape are also shown, where b = 6.50 in., h = 15.0 in., ty = 0.550 in., t₂ = 0.325 in. (a) Compute the value of Q that is associated with point K, which is located d = 4.0 in. above the centroid of the wide-flange shape. (b) If the allowable shear stress for the wide-flange shape is Tallow = 13 ksi, determine the maximum concentrated load P than can be applied to the cantilever beam. b 4 Answer: Omay= the tolerance is +/-3% in.3. 9 Answer: Pmax=1 (1) (2) kips. (3) The maximum value of Q for the cross-section is at the z centroidal axis. Break the calculation into two parts. First, consider only the portion of the web between the z centroidal axis and the bottom of the top flange, and calculate Q₁ for this portion of the cross-section. Then, consider only the top flange, and calculate Q₂ for this portion of the cross-section. The value of Qmax is then the sum of Q₁ and…