A beam ACB is supported by a collar at A and rest on a smooth surface at B. The collar is fixed to the rod and is free to slide over the fixed inclined rod. The beam is subjected to point force PC = 10 kips and distributed forces acting on the span AC as shown in the figure. The maximum magnitude of the distributed force is wo = 2 kips/ft. a. Draw the freebody diagram of the beam ACB. b. Calculate the reactions at A and B. Please neglect the depth/thickness of the beam. Length of AC is 10 ft, Length of CB is 3 ft

A beam ACB is supported by a collar at A and rest on a smooth surface at B. The collar is fixed to the rod and is free to slide over the fixed inclined rod. The beam is subjected to point force PC = 10 kips and distributed forces acting on the span AC as shown in the figure. The maximum magnitude of the distributed force is wo = 2 kips/ft. a. Draw the freebody diagram of the beam ACB. b. Calculate the reactions at A and B. Please neglect the depth/thickness of the beam. Length of AC is 10 ft, Length of CB is 3 ft

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The rigid bar BDE is supported by two links AB and CD. Link AB is made of steel (E=200 GPa) and has a cross sectional area of 700 mm'; link CD is made of aluminum (E=70 GPa) and has a cross- sectional area of 500 mm. For the 28 kN force shown, deflection at E. A 0.4 m 0.3 m 28 kN B E 0.25 m 0.60 m
EXAMPLE 4.2 The rigid bar BDE is supported by two links AB and CD. Link AB is made of aluminum (E = 70 GPa) and has a cross-sectional area of 500 mm²; link CD is made of steel (E = 200 GPa) and has a cross-sectional area of 600 mm?. For the 30-kN force shown, determine the deflection (a) of B, (b) of D, (c) of E. %3D 0.4 m 0.3 m 30 kN D E -0.4 m 0.2 m
The rigid bar BDE is supported by two links AB and CD. Link AB is made of steel (E=200 GPa) and has a cross sectionnal area of 700 mm; link CD is made of aluminum (E=70 GPa) and has a cross sectional area of 500 mm. For the 28 kN force shown, deflection at E. 0.4 m 0.3 m 28 kN B 0.25 m 0.60 m
The rigid bar BDE is supported by two links AB and CD. Link AB is made of aluminum (E = 70 GPa) and has a cross-sectional area of 500 mm^2; link CD is made of steel (E = 200 GPa) and has a cross-sectional area of 600 mm^2. For the 30 kN force shown, determine the deflection of B and E, respectively. 0.4 m 0.3 m B A 0.2 m OC -0.4 m 30 kN E
The value of M in the beam ABC shown in the figure is such that the joint B does not rotateThe value of support reaction (in kN) at B should be equal to
3. The rigid bar BDE is supported by two links AB and CD. Link AB is made of steel (E=200 GPa) and has a cross-sectional area of 700 mm'; link CD is made of aluminum (E=70 GPa) and has a cross sectional area of 500 mm. For the 28 kN force shown, deflection at E. A 0.4 m 0.3 m 28 kN D 0.25 m 0.60 m
The beam shown below is suspended from two steelrods as shown and is initially horizontal. The midpointB of the beam is deflected 15 mm downward byforce Q. The steel used for the rods has properties E= 200 GPa and  = 275 MPa, determinea. the required maximum value of Q.b. the deformation of rod AD.c. the deformation of rod CE.
B.2. Elementary beam theory predicts that the axial bending stress ox in a prismatic beam is given by: σ, X (M.1, M,1,)y+ (M, I. - M.1,-) z (1,1.-1²-) where My and M₂ are bending moments applied to a cross-section, and where ly, Iz and lyz are second moments of area in the usual notation (Oxyz is a Cartesian coordinate system in which the x axis corresponds to the centroidal axis of the beam). (i) What assumptions have been made in the derivation of the above expression? (ii) Indicate by means of a sketch the directions in which positive values of the bending moments My and M₂ act on a cut plane facing in the positive x direction.
Problem 3: For the beam shown in Figure 3. A. Find the reaction support B (R) B. Find the reaction support D (Rp)
A prismatic beam P-Q-R of flexural rigidity El = 1x104 kNm2 is subjected to a moment of 180 kNm at Q as shown in the figure. an 180 kNm R Q (einu n 5 m 4 m The rotation at Q (in rad, up to two decimal places) is
3. Two beams are supported as shown in the diagram below, each 150mm x 200mm x 4 meters. Beam CD is a cantilever beam carrying a uniformly distributed load of 4 KN/m freely supported on beam AB. Beam AB is freely supported on each ends. E = 13.8 GPa for both beam. Neglect the weight of the beam. a. Compute the reaction at D. b. Compute the deflection at D. c. Compute the bending stress of beam CD. 4kN Im 4m 4m
Find: 1. The magnitude of the horizontal component of the reaction force at Support-A is kips. 2. The direction of the horizontal component of the reaction force at Support-A is 3. The magnitude of the vertical component of the reaction force at Support-A is, 4. The direction of the vertical component of the reaction force at Support-A is 5. The magnitude of the reaction force at Support-B is_ 6. The direction of the reaction force at Support-B is 7. The magnitude of the horizontal component of the force carried by Pin-C is. 8. The magnitude of the vertical component of the force carried by Pin-C is kips. kips. kips. kips. 5 kips 4 kips -10 ft 6 ft 10 ft 15 ft 15 ft