Novak Fashions needs to replace a beltloop attacher that currently costs the company $58,000 in annual cash operating costs. This machine is of no use to another company, but it could be sold as scrap for $3,128. Managers have identified a potential replacement machine, Euromat's Model HD-435. The HD-435 is priced at $93,000 and would cost Novak Fashions $38,000 in annual cash operating costs. The machine has a useful life of 8 years, and it is not expected to have any salvage value at the end of that time.
Q: Starling Co. is considering disposing of a machine with a book value of $20,200 and estimated…
A: Total saving in variable manufacturing costs = Annual savings x no. of years = ($23000 - $19000) x 5…
Q: Novak Fashions needs to replace a beltloop attacher that currently costs the company $58,000 in…
A: Net Present Value It is the method under which cash inflows that are received during the lifetime…
Q: Pappy's Potato has come up with a new product, the Potato Pet (they are freeze-dried to last…
A: The payback period is the time taken to recoup the initial investment net present value is the…
Q: Refer to the problem given in answering the following questions:(a) How long does it take to recover…
A: The pay-back period is a capital budgeting technique that is used to find out the period when…
Q: Flowton Products enjoys a steady demand for stainless steel infiltrators used in a number of…
A: The time it takes to recoup the value of an investment is mentioned because of the payback period.…
Q: . Fancy Foods is considering replacing all 12 of its meat scales with new, digital ones. The old…
A: Net Present Value (NPV): NPV is a technique used in capital budgeting to see the project is…
Q: Angelus Press is considering replacing all of its old cash registers with new ones. The old…
A: Note: Hi! Thank you for the question, As per the honor code, we are allowed to answer three…
Q: The Johnson Company pays $1700 a month to a trucker to haul wastepaper and cardboard to the city…
A: Given information:Monthly expenditure on hauling=$1,700Cost of hydraulic press…
Q: Waterways is considering the replacement of an antiquated machine that has been slowing down…
A: Cost accounting is the combination of two words, cost, and accounting. Cost is nothing but the…
Q: Waterways is considering the replacement of an antiquated machine that has been slowing down…
A: The question is based on the concept of Cost Accounting.
Q: Garrett Boone, Ayayai Enterprises’ vice president of operations, needs to replace an automatic lathe…
A: (a) Calculate the present value of annuity factor of $ 1: present value of annuity factor of $ 1 =…
Q: Denny Corporation is considering replacing a technologically obsolete machine with a new…
A: Simple rate of return = Annual incremental net operating income/Initial investment
Q: Dwight Donovan, the president of Donovan Enterprises, is considering two investment opportunities.…
A:
Q: The Tingey Company has 500 obsolete microcomputers that are carried in inventory at a total cost of…
A: The selling price is the amount that is received from the sale of the product. The total sales…
Q: Delaware Chemicals is considering the installation of a computer process control system in one of…
A: Workings:
Q: Which project should the firm choose?
A: Net Present Value is a capital budgeting method to evaluate the better project. It is the excess of…
Q: Shine Co. is looking at expanding its business to include Bitcoin Mining, and change their name to…
A: Since you have posted a question with multiple sub-parts, we will solve the first three sub-parts…
Q: A large food-processing corporation is considering using laser technology to speed up and eliminate…
A: MARR stands for Minimum acceptable rate of return.It reflects this opportunity cost of capital.
Q: All equipment costs will continue to be depreciated on a straight-line basis. For simplicity, ignore…
A: Given information is: Suppose the one-time equipment cost to replace the production equipment is…
Q: Management of NUBD Corporation is considering whether to purchase a new model L37 machine costing…
A: SOLUTION- OPPORTUNITY COST IS THE PROFIT LOST WHEN ONE ALTERNATIVE IS SELECTED OVER ANOTHER.
Q: Delaware Chemicals is considering the installation of a computer process control system in one of…
A: a) Computation of cash inflows over the life of the project: Hence, the cash inflows over the life…
Q: Axdew Limited is considering whether to manufacture an improved, more expensive version of their…
A: Maintenance cost is the cost incurred by a business to keep its products in well working condition.…
Q: The management of Kimco is evaluating the possibility of replacing their large mainframe computer…
A: Net present value is the difference between the present value of cash inflows and present value of…
Q: A logistic company is considering using automated guided vehicles (AGVS) system to speed up the…
A: Maximum Price of an equipment is the present value of free cash flows generated by the equipment.
Q: Matta Manufacturing is trying to decide between two different conveyor belt systems. System A costs…
A: EAC or equivalent annual cost is the annual cost of owning and maintaining the asset over its entire…
Q: t cash flows of P5,000 per year for 2 years. Process Y will cost P11,500 and will produce cash flows…
A:
Q: . Fancy Foods is considering replacing all 12 of its meat scales with new, digital ones. The old…
A: As we are given real rate of return and real rate of return, we can simply calculate the NPV
Q: Rolston Music Company is considering the sale of a new sound board used in recording studios. The…
A: Computation:
Q: . Fancy Foods is considering replacing all 12 of its meat scales with new, digital ones. The old…
A: Net present value method (NPV): Net present value method is the method which is used to compare the…
Q: . Fancy Foods is considering replacing all 12 of its meat scales with new, digital ones. The old…
A: Net Present Value (NPV): NPV is a technique used in capital budgeting to see the project is…
Q: NUBD Inc. is considering two average-risk alternative ways of producing its patented polo shirts.…
A:
Q: 3. Assume that management can identify several intangible benefits associated with the new machine,…
A: 1. Net annual savings can be calculated as follows: It would come out to be:
Q: Nagle Electric, Inc., of Lincoln, Nebraska, must replace a robotic Mig welder and is evaluating…
A: Formula: Total cost = Variable cost + Fixed cost Sum of both variable and fixed cost derives the…
Q: Alson Enterprises needs someone to supply it with 185,000 cartons of machine screw per year to…
A: Under the straight-line method, the depreciation is computed by dividing the initial cost by the…
Q: edavoy Company is considering a new project that complements its existing business. The machine…
A: NPV stands for net present value. It is the sum of present values of all future cash flows from a…
Q: Dwight Donovan, the president of Perez Enterprises, is considering two investment opportunities.…
A: Given Project A initial cost = $103000 Project B initial cost = $48000 Cash inflows of…
Q: A salad oil bottling plant can either buy caps for the glass bottles at 5 cents each or install…
A: Pay-Back period is traditional tool used to measure viability of investment proposal. PB Period…
Q: Management of National Co. is considering whether to purchase a new model MX1 machine costing…
A: Here in this question, we are required to calculate the differential cost between the two…
Q: Pappy’s Potato has come up with a new product, the Potato Pet (they are freeze-dried to last…
A: GIVEN, initial cost = $950,000 fixed cost = $244,000 sales= $935,000 variable cost = 24% of sales=…
Q: NUBD Inc. is considering two average-risk alternative ways of producing its patented polo shirts.…
A: NPV refers to net present value and is it calculated as the present value of all future cash flows…
Q: Management of Plascencia Corporation is considering whether to purchase a new model 370 machine…
A: Differential cost: Differential cost means the difference between cost of two alternatives.…
Q: Mountain Gear has been using the same machines to make its name-brand clothing for the last five…
A: Machines are generally replaced for various reasons, the machine gets obsolete due to advancement in…
Q: Your company has been approached to bid on a contract to sell 5,200 voice recognition (VR) computer…
A: Here, Tax Rate is 25% Required Return is 13% Variable Cost is $165 Required NPV is $100,000
Q: Garrett Boone, Grouper Enterprises’ vice president of operations, needs to replace an automatic…
A: Calculating the total cash inflow from the new automatic lathe machine. We have,
Q: quickly
A: Note: $121,000 that has been spent on marketing survey can be considered as a sunk cost & need…
Q: Whispering Winds Industries is considering the purchase of new equipment costing $1,500,000 to…
A: Price of New equiment = 1500000 SAlvage Value of equipment = 120000 Initial Investment =…
Trending now
This is a popular solution!
Step by step
Solved in 3 steps
- The Aubey Coffee Company is evaluating the within-plant distribution system for its new roasting, grinding, and packing plant. The two alternatives are (1) a conveyor system with a high initial cost but low annual operating costs and (2) several forklift trucks, which cost less but have considerably higher operating costs. The decision to construct the plant has already been made, and the choice here will have no effect on the overall revenues of the project. The cost of capital for the plant is 8%, and the projects’ expected net costs are listed in the following table: What is the IRR of each alternative? What is the present value of the costs of each alternative? Which method should be chosen?Jonfran Company manufactures three different models of paper shredders including the waste container, which serves as the base. While the shredder heads are different for all three models, the waste container is the same. The number of waste containers that Jonfran will need during the following years is estimated as follows: The equipment used to manufacture the waste container must be replaced because it is broken and cannot be repaired. The new equipment would have a purchase price of 945,000 with terms of 2/10, n/30; the companys policy is to take all purchase discounts. The freight on the equipment would be 11,000, and installation costs would total 22,900. The equipment would be purchased in December 20x4 and placed into service on January 1, 20x5. It would have a five-year economic life and would be treated as three-year property under MACRS. This equipment is expected to have a salvage value of 12,000 at the end of its economic life in 20x9. The new equipment would be more efficient than the old equipment, resulting in a 25 percent reduction in both direct materials and variable overhead. The savings in direct materials would result in an additional one-time decrease in working capital requirements of 2,500, resulting from a reduction in direct material inventories. This working capital reduction would be recognized at the time of equipment acquisition. The old equipment is fully depreciated and is not included in the fixed overhead. The old equipment from the plant can be sold for a salvage amount of 1,500. Rather than replace the equipment, one of Jonfrans production managers has suggested that the waste containers be purchased. One supplier has quoted a price of 27 per container. This price is 8 less than Jonfrans current manufacturing cost, which is as follows: Jonfran uses a plantwide fixed overhead rate in its operations. If the waste containers are purchased outside, the salary and benefits of one supervisor, included in fixed overhead at 45,000, would be eliminated. There would be no other changes in the other cash and noncash items included in fixed overhead except depreciation on the new equipment. Jonfran is subject to a 40 percent tax rate. Management assumes that all cash flows occur at the end of the year and uses a 12 percent after-tax discount rate. Required: 1. Prepare a schedule of cash flows for the make alternative. Calculate the NPV of the make alternative. 2. Prepare a schedule of cash flows for the buy alternative. Calculate the NPV of the buy alternative. 3. Which should Jonfran domake or buy the containers? What qualitative factors should be considered? (CMA adapted)Hudson Corporation is considering three options for managing its data warehouse: continuing with its own staff, hiring an outside vendor to do the managing, or using a combination of its own staff and an outside vendor. The cost of the operation depends on future demand. The annual cost of each option (in thousands of dollars) depends on demand as follows: If the demand probabilities are 0.2, 0.5, and 0.3, which decision alternative will minimize the expected cost of the data warehouse? What is the expected annual cost associated with that recommendation? Construct a risk profile for the optimal decision in part (a). What is the probability of the cost exceeding $700,000?
- Novak Fashions needs to replace a beltloop attacher that currently costs the company $58,000 in annual cash operating costs. This machine is of no use to another company, but it could be sold as scrap for $3,128. Managers have identified a potential replacement machine, Euromat's Model HD-435. The HD-435 is priced at $93,000 and would cost Novak Fashions $38,000 in annual cash operating costs. The machine has a useful life of 8 years, and it is not expected to have any salvage value at the end of that time. Click here to view the factor table. (a) Calculate the net present value of purchasing the HD-435, assuming Novak Fashions uses a 12% discount rate. (For calculation purposes, use 4 decimal places as displayed in the factor table provided and round final answer to 0 decimal place, e.g. 58,971.) Net present value (b) Calculate the internal rate of return on the HD-435. (Round answer to 0 decimal places, eg. 25%.) Internal rate of return % (c) Calculate the payback period of the…Difend Cleaners has been considering the purchase of an industrial dry-cleaning machine. The existing machine is operable for three more years and will have a zero disposal price. If the machine is disposed now, it may be sold for $170,000. The new machine will cost $360,000 and an additional cash investment in working capital of $170,000 will be required. The new machine will reduce the average amount of time required to wash clothing and will decrease labor costs. The investment is expected to net $130,000 in additional cash inflows during the first year of acquisition and $290,000 each additional year of use. The new machine has a three-year life, and zero disposal value. These cash flows will generally occur throughout the year and are recognized at the end of each year. Income taxes are not considered in this problem. The working capital investment will not be recovered at the end of the asset's life. What is the net present value of the investment, assuming the required rate of…Axdew Limited is considering whether to manufacture an improved, more expensive version of their current line of best-selling lava lamps. Axdew currently spends $15,000 per year on maintenance and $80,000 on full-time salaries for staff. Maintenance costs are expected to remain the same but an additional labourer will need to be hired at an annual cost of $30,000. Manufacture of the newer version will require re-tooling of its existing machinery at a cost of $40,000. Axdew paid consultants a fee of $30,000 for a feasibility study to determine the viability of the new product. Which of the costs discussed above need to be considered by management in deciding whether to proceed with the new product? Justify your answer.
- A small company that manufactures vibration isolation platforms is trying to decide whether it should replace the current assembly system (D), which is rather labor intensive, now or 1 year from now with a system that is more automated (C). Some components of the current system can be sold immediately for $9000, but they will be worthless hereafter. The operating cost of the existing system is $192,000 per year. System C will cost $320,000 with a $50,000 salvage value after 4 years. Its operating cost will be $68,000 per year. If you are told to do a replacement analysis using an interest rate of 10% per year, which system do you recommend?A small company that manufactures vibration isolation platforms is trying to decide whether it should immediately upgrade the current assemblysystem D, which is rather labor-intensive, with the more highly automated system C one year from now. Some components of the current system canbe sold now for $9000, but they will be worthless hereafter. The operating cost of the existing system is $192,000 per year. System C will cost $320,000 with a $50,000 salvage value after four years. Its operating cost will be $68,000 per year. If you are told to do a replacement analysis using an interest rate of 10% per year, which system do you recommend?Garrett Boone, Bridgeport Enterprises’ vice president of operations, needs to replace an automatic lathe on the production line. The model he is considering has a sales price of $233,282 and will last for 15 years. It will have no salvage value at the end of its useful life. Garrett estimates the new lathe will reduce raw materials scrap by $24,000 per year. He also believes the lathe will reduce energy costs by $6,000 per year. If he purchases the new lathe, he will be able to sell the old lathe for $5,100.Click here to view the factor table.(a) Calculate the lathe’s internal rate of return. (Round answer to 0 decimal places, e.g. 25%.) Internal rate of return enter the internal rate of return in percentages rounded to 0 decimal places %
- Poisson Calculators has found that it is indifferent between purchasing a high-capacity vacuum component assembly machine or a lower capacity machine as long as sales are above 1,900 units per month. The price of each calculator is $70. The high-capacity machine has cash expenses of $100,000 per month and depreciation and amortisation expenses of $30,000 per month, while the alternative has cash expenses of $30,000 per month and depreciation and amortisation expenses of $5,000 per month. Under the low-capacity alternative, variable costs per unit are $60. If the company bases its decisions on the Accounting Operating Profit Break-even, then what is the variable cost per unit under the high-capacity alternative? a. $10 b. $47 c. $60 d. $70Garrett Boone, Ayayai Enterprises’ vice president of operations, needs to replace an automatic lathe on the production line. The model he is considering has a sales price of $395,900 and will last for 12 years. It will have no salvage value at the end of its useful life. Garrett estimates the new lathe will reduce raw materials scrap by $42,500 per year. He also believes the lathe will reduce energy costs by $23,500 per year. If he purchases the new lathe, he will be able to sell the old lathe for $5,338.Click here to view the factor table.(a) Calculate the lathe’s internal rate of return. Internal rate of return $ % (b) If Ayayai Enterprises uses a 10% hurdle rate, should Garrett purchase the lathe? YesNoYour company has been approached to bid on a contract to sell 19,000 voice recognition (VR) computer keyboards per year for four years. Due to technological improvements, beyond that time they will be outdated and no sales will be possible. The equipment necessary for the production will cost $4,000,000 and will be depreciated on a straight- line basis to a zero salvage value. Production will require an investment in net working capital of $140,000 to be returned at the end of the project, and the equipment can be sold for $260,000 at the end of production. Fixed costs are $795,000 per year and variable costs are $43 per unit. In addition to the contract, you feel your company can sell 4,600, 12,200, 14,200, and 7,500 additional units to companies in other countries over the next four years, respectively, at a price of $140. This price is fixed. The tax rate is 23 percent, and the required return is 12 percent. Additionally, the president of the company will undertake the project only…