ital recording system samples each of two stereo input signals with a 16bit ADC at 44.1k sample per second. (a) Determine the output peak SNR for a full- scale sinusoid. (b) The bit stream of digitized data is augment by the addition of error-correcting, clock extraction, display and control bit fields. These additional bits represent 100 percent overhead. Determine the out put bit rate of this system. (c) If we would like to store an hour's worth of music using this system, determine the memory size required. (d) for a comparison, a high-grade collegiate dictionary may contain 1500 pages, 2 columns per page, 100 lines per column, 8 words per line, 6 letters per word and 7 bits per letter (all on average) Determine the

ital recording system samples each of two stereo input signals with a 16bit ADC at 44.1k sample per second. (a) Determine the output peak SNR for a full- scale sinusoid. (b) The bit stream of digitized data is augment by the addition of error-correcting, clock extraction, display and control bit fields. These additional bits represent 100 percent overhead. Determine the out put bit rate of this system. (c) If we would like to store an hour's worth of music using this system, determine the memory size required. (d) for a comparison, a high-grade collegiate dictionary may contain 1500 pages, 2 columns per page, 100 lines per column, 8 words per line, 6 letters per word and 7 bits per letter (all on average) Determine the

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

ChapterS: Safety, Basic Electricity And Ohm's Law

Section: Chapter Questions

Problem 8RQ: What is an MSDS?

See similar textbooks

Similar questions

What do you mean by fractional sampling rate conversion? Explain with an example of converting 48 kHz signal to 44.1 kHz signal using multi-stage fractional sampling rate converter
What do you mean by fractional sampling rate conversion? Explain with an example of converting 48 kHz signal to 44.1 kHz signal using multi-stage fractional sampling rate converter. (ii) What are the effects of finite word length in digital filters
Exampic Bandwidth of the input to pulse code modulator is restricted to 4 kHz. The input varies from -3.8V to 3.8 V and has the average power of 30 mW, the required signal to quantization noise power ratio is 20 dB. The modulator produces binary output. Assume uniform quantization Calculate the number of bits required per sample.
Choose the correct answer low HDOP (Horizontal Dilution of Precision) number such as2 indicates a ........................... a.poor fix b.good fix c.poor signal quality d. good signal quality
The information in an analog signal voltage waveform is to be transmitted over a PCM system with an accuracy of : 0.1 % of the peak-to-peak analog signal. The analog voltage waveform has a bandwidth of 43 Hz and an amplitude range of - 10 to 10 Vots. Determine the minimum bit rate fin bps) required in the PCM system? O a 688 O 774 O c 387 O d 86 Oe 258
Q2/ The information in an analog signal voltage waveform is to be transmitted over a PCM system with an accuracy of ±0.1% (full scale). The analog voltage waveform has a bandwidth of 100 Hz and an amplitude range of -10 to +10 volts. Find the minimum sampling rate required. i) ii) Find minimum bit rate required in the PCM signal. Find the number of bits in each PCM word. iii) iv) Find the minimum absolute channel bandwidth required for the transmission of the PCM signal.
13. The purpose of the __________ is to periodically sample the continuallychanging analog signal and covert those samples to a series of constantamplitude pulses that can more easily be converted to binary PCM.14. In ___________, the input analog waveform is sampled by a sampling pulsewith an output waveform that is flattened at the top.15. The simplest form of pulse modulation is ______________.
The information in an analog voltage waveform is to be transmitted over a PCM system with a 10.1% accuracy (full scale). The analog waveform has an absolute bandwidth of 100 Hz and an amplitude range of -10 to +10 V. (a) Determine the minimum sampling rate needed. (b) Determine the number of bits needed in each PCM word. (c) Determine the minimum bit rate required in the PCM signal. (d) Determine the minimum absolute channel bandwidth required for transmission of this PCM signal.
What is the effect of over-modulation on the output signal? How one can avoid the over- modulation case?
In a certain pulse code modulated system, the number of bits associated with the quantizer is 5 and the amplitude of the input sinusoidal signal is 10 V. Estimate the quantization noise power.
1.) Determine the bit rate and quantization step of the ADC in the sampling of analog signal with x[n] of 1.02 Vpp, sampling rate of 20 samples per second, and 8-bit binary code 2.) An analog signal is to be coded by an ADC. The signal contains significant frequencies up to 6MHz. The quantization error in any one sample value must be within (plus-minus sign) 0.5% of the peak-to-peak amplitude range of the ADC. How many binary digits must each sample contain?
An analog signal is to be coded by an ADC. The signal contains significant frequencies up to 6MHz. The quantization error in any one sample value must be within ± 0.5% of the peak-to-peak amplitude range of the ADC. How many binary digits must each sample contain?