A nozzle discharges 100 L/s with a velocity of 24 m/s and is inclined 45° downwards. The jetcoming out of the nozzle strikes an unsymmetrical two-cusped vane that is moving at avelocity of 6 m/s along the horizontal plane. Half of the jet is deflected upwards 45°and theother half is deflected downwards 90°. Determine the x- and y-components of the forceexerted by the jet on the vane.vane

Answered: Image /qna-images/answer/5f414499-c51a-47df-a050-ddf997ac7cd0.jpg

hozzle discharges 100 L/s with a velocity of 24 m/s and is inclined 45° downwards. The jet ming out of the nozzle strikes an unsymmetrical two-cusped vane that is moving at a ocity of 6 m/s along the horizontal plane. Half of the jet is deflected upwards 45°and the er half is deflected downwards 90°. Determine the x- and y-components of the force erted by the jet on the vane.

hozzle discharges 100 L/s with a velocity of 24 m/s and is inclined 45° downwards. The jet ming out of the nozzle strikes an unsymmetrical two-cusped vane that is moving at a ocity of 6 m/s along the horizontal plane. Half of the jet is deflected upwards 45°and the er half is deflected downwards 90°. Determine the x- and y-components of the force erted by the jet on the vane.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A 60° bend occurs in a water pipeline that reduces from 600 mm diameter to 300 mm diameter at the bend (inside bend angle 120). If the gauge pressure at the inlet is 172 KPa, determine the magnitude ad angle of the thrust on the bend when the flow is 0.85 m3/s. Hint: start by calculating the initial and final velocities, then the final pressure. Next, analyze the pressure and momentum forces in the x and y planes.
4. A water jet of diameter 2.5 cm flows freely into the atmosphere in a horizontal plane with an initial velocity of 6.5 m/s and is deflected by a curved vane of 90o as shown in FIGURE. Analyze and locate the resulted forces exerted on the water by the vane in the x and y directions. Given the density of water is 1000 kg/m3 ?
The water enters the sprinkler nozzles with a flow rate of 50 liters / hour in the vertical axis direction and leaves the sprinkler nozzles as 25mm diameter jets and making θ angle with the tangential direction as shown in the figure. The length of the sprinkler arms is 0.45 m. Without considering friction effects; For θ = 75 °, set the rotational speed in rpm.
A 60 degrees bend occurs in a water pipeline that reduces from 600 mm diameter to 300 mm diameter at the bend (inside bend angle 120 degrees). If the gauge pressure at the inlet is 172 kPa, determine the magnitude and angle of the thrust on the bend when the flow is 0.85 m3 /s. Hint: start by calculating the initial and final velocities, then the final pressure. Next, analyse the pressure and momentum forces in the x and y planes.
A jet strikes a stationery curved vane without shock and is deflected 150° from its original direction. The discharge from the jet is 0.68kg/s and the velocity is 24m/s. Assume that there is no reduction of relative velocity due to friction and determine the magnitude and direction of the resultant force on the vane. If the vane is allowed to move with velocity of 8m/s in the direction of the jet, calculate the power developed
Water is flowing into and discharging from a pipe U-section as shown . At flange (1), the total absolute pressure is 200 kPa, and 55 kg/s flows into the pipe. At flange (2), the total pressure is 150 kPa. At location (3), 15 kg/s of water discharges to the atmosphere, which is at 100 kPa. Determine the total x- and z-forces at the two flanges connecting the pipe. Discuss the significance of gravity force for this problem. Take the momentum-flux correction factor to be 1.03 throughout the pipes
The pump in the figure draws water from an 8-in. suction pipe and discharges through a 6-in. pipe in which the velocity is 12 ft per second. The pressure is -5 psi at A in the suction pipe. The 6-in pipe discharges horizontally into air at C. To what height h above B can the water be raised if B is 6 ft above A and 20 horsepower is delivered to the pump? Assume that the pump operates at 70 percent efficiency and that the frictional loss in the pipe between A and C is 10 ft.
Consider the bend shown in . The total mass of the bend and the water within it is 20 kg, with a mass center at point G. The pressure of the water at A is 50 kPa Assume that no force is transferred to the flanges at A and B. Suppose the velocity through the pipe to be 4.5 m/s. 100 mm By 60 100 mm 600 mm 150 mm- 100 mm D Part A Determine the horizontal component of force exerted on the fixed support D. Express your answer to three significant figures and include the appropriate units.
A water jet of 80 mm in diameter with a velocity of 15 m/s strikes a vane having a linear veolcity of 5 m/s in the direction of the jet. The jet enters the vane horizontally and glides over it tangentially and is deflected through 120 degree angle. Find the approximate value of the force experienced by the vane in the direction of jet. (Hint: Force rate of the cahinge of momentum) 500 N 750 N 1000 N 1250 N
3 liter per 26 sec is discharged from nozzle to impact 60°target if the distance between nozzle and target equal four times a nozzle's diameter and the diameter for nozzle equal 1cm depend on this information to answer following questions: 1. determine the velocity at nozzle 2. determine the impact force 3. if we change the target to hemispherical, determine the ration between two forces
The drawing shows a centrifugal fan. The fan draws 25 m^3/s of air from the room through the 0.75 diameter bellmouth inlet. The air is discharged into a 0.5 m diameter pipe which is connected to the downstream piping by a flexible connector. Note that the flexible connector does not transmit any forces or momentum between the connected components. Determine the forces in the x and y directions which the floor must apply to hold the fan in place. Assume incompressible flow with p=1.3 kg/m^3. Atmospheric pressure is 101 kPa.
oI water from a fixed nozzle has a diameter d of 30 mm and strikes a flat plate at angle u of 30° to the normal to the plate. The velocity of the jet v is 5m/s, and the surface of the plate can be assumed to be frictionless. Calculate the force exerted normal to the plate if the plate is moving with velocity u of 4m/s in the same direction as the jet. 30 F. T. Air flows from a reservoir where p 300 Q/2 kPa and T 500 K through a throat to section 1 in Figure where there is a normal-shock wave. Compute (a) pr, (b) p2, (c) po2. (d) Až, (e) posa (f) A3, (g) p3, (h) T03, and (i) T3. 12 39- I m? 2 m2 A- Aes 3 m2