Considering fins with adiabatic tips, plot the fin efficiency, n,, as a function of length (from 1 to 20 cm) for fins made of Inconel 625 (a high temperature alloy of k = 20 W/m-K) with the following geometries: a. A rectangular straight fin with a width of 5 cm and a thickness of 0.5 cm b. A parabolic straight fin with a width of 5 cm and a thickness of 0.5 cm at the base. c. A rectangular pin fin (cylindrical) with a diameter of 1.8 cm. d. A triangular pin fin with a diameter of 1.8 cm at the base. For (a-d) assume that the convection coefficient is h= 8 W/m²-K in all circumstances. For better comparison, please plot all four cases in the same graph. Comment on the general rules for fin selection if you need to design a fin system.

Considering fins with adiabatic tips, plot the fin efficiency, n,, as a function of length (from 1 to 20 cm) for fins made of Inconel 625 (a high temperature alloy of k = 20 W/m-K) with the following geometries: a. A rectangular straight fin with a width of 5 cm and a thickness of 0.5 cm b. A parabolic straight fin with a width of 5 cm and a thickness of 0.5 cm at the base. c. A rectangular pin fin (cylindrical) with a diameter of 1.8 cm. d. A triangular pin fin with a diameter of 1.8 cm at the base. For (a-d) assume that the convection coefficient is h= 8 W/m²-K in all circumstances. For better comparison, please plot all four cases in the same graph. Comment on the general rules for fin selection if you need to design a fin system.

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter2: Steady Heat Conduction

Section: Chapter Questions

Problem 2.38P: 2.38 The addition of aluminum fins has been suggested to increase the rate of heat dissipation from...

See similar textbooks

Similar questions

Consider a very long rectangular fin attached to a flat surface such that the temperature at the end of the fin is essentially that of the surrounding air, i.e., 20°C. Its width is 5.0 cm; thickness is 1.0 mm; thermal conductivity is 200 W/m-K, and its base temperature is 40°C. The heat transfer coefficient is 20 W/m2.K. Estimate: (a) fin temperature (in °C) at a distance of 5.0 cm from the base, Round your answer to 2 decimal places. Add your answer (b) the rate of heat loss (in W) from the entire fin. Round your answer to 2 decimal places. Add your answer
What do you mean by fins? What is its significance. What are its applications. Explain it by giving three examples in details. This question is based on heat transfer.
You would like to use straight pin fins, with a diameter of 6 mm and length of 4 cm, to cool a device. The baseplate that the pins will be attached to has dimensions of 10 cm by 12 cm. The pins are made out of aluminum, which has a thermal conductivity of 205 W/m-°C, and the convection coefficient of the flow around the pins is 25 W/m².°C. What is the overall efficiency of the the finned baseplate if there are 25 pins. Assume the tips to be adiabatic. Neglect radiation. 0ʻ974
An aluminum fins 1.5 cm wide and 1 mm thick are placed on a 2.5 cm diameter tube to dissipate the heat . The tube surface temperature is 170 oC . Calculate the heat loss per fin for h= 130 W/m2 .oC for aluminum.
The outer surface of an oil heater at a uniform temperature of 100°C is to be filled with straight rectangular fins having a uniform thermal conductivity of 180 W/m.K. The ambient air temperature is 25°C and the heat transfer coefficient is 100 W/m².K. The fin thickness t-1mm, width w= 1m and its length is L= 10mm. If the heat transfer from the tip of the fin by convection, calculate fin efficiency and effectiveness. Tь =100 с Too = 25°C h = 100 W/m2-K L = 10 mm Air k= 180 W/m-K t = 1 mm
A hot surface at 100 °C is to be cooled by attaching 3-cm-long, 0.25-cm-diameter aluminum pin fins to it, with a center-to-center distance of 0.6 cm, as shown in Fig. 2. The temperature of the surrounding medium is 30 °C, and the heat transfer coefficient on the surfaces is 35 W/m2 K. Determine: the rate of heat transfer from the surface for a 10-cm x 10-cm section of plate, the overall effectiveness of the fins. i ii 3 cm 0.6 cm 0.25 cm Fig. 2
Water flows at 67 C inside a 2.5 cm inside diameter tube such that hi = 3500 W/m² .C . The tube has a wall thickness 0.72 mm with a thermal conductivity of 18 W/m.C. The outside of the tube loses heat by free convection with ho= 7.6 W/m².C. Calculate the overall heat transfer coefficient and heat loss per unit length to surrounding air at 15 C.
A steel rod (k = 30 W/m degree) 1 cm in diameter and 7 cm long protrudes from a wall which is maintained at 100 degree Celsius. The rod is insulated at its tip and is exposed to an environment with h = 50 W/m2 degree and t a = 30 degree Celsius. Calculate the fin efficiency
The wall of a 5 m high cylinderical steel tank (ks= 20 W/mK) of inner diameter 1.5 m and 200 mm thick contains hot oil at 100 C. On the outside of the tank 12 mm of spray urethane insulation is added to stop the oil from cooling. If the worst outside temperature is -6 , (hi = 16 W/m^2 K) and (ho = 5 W/m^2 K) how much heat needs to be added to keep the tank at 100 C for pumping reasons and what are the overall heat transfer coefficients Uo and Ui?
Q3/ Circular fin of rectangular profile is attached to a 3.0-cm-diameter tube maintained at 100°C. The outside diameter of the fin is 9.0 cm and the fin thickness is 1.0 mm. The environment has a convection coefficient of 50 W/m2. °C and a temperature of 30°C. Calculate the thermal conductivity of the material for a fin efficiency of 60 percent. 1 0.9 L = r2-1 L= L + 0.8 P2 = +Le 0.7 A = tle 0.6 0.5 0.4 0.3 0.2 0.1 0.5 1 1.5 2 2.5 3. Finefficiency, ny
A hollow spherical steel has an inner diameter of 30cm and outer diameter of 37cm. It is covered with insulation of 5cm thick. The inner surface of the steel is kept at a constant temperature of 100°C and outside insulation is 30°C. The thermal conductivity of the material is 0.65 W/m-k. By what percentage will the rate of loss be decreased if the thickness of the insulation is increased by 4cm? O a. 16.65% O b. 83.35% O c. 79.57% O d. 20.43% O e. None
Q2 fin made of AL metal with thermal conductivity (199 W / mK). Fin dimensions 3 cm long and 2.5 mm thick, extending from a wall and exposed to air at the end. Wall temperature 420 ° C and air temperature 25 ° C. Calculate the heat loss from the fin and the fin efficiency. Assume the heat transfer coefficient of 10 W / m K and neglect the heat loss at the fin tip. Explain the importance of assuming isolated n fin end in practice