As shown in the figures below, and the Video, a rectangular barge floats in a stable configuration provided the distance between the center of gravity, CG, of the object (boat and load) and the center of buoyancy, C, is less than a certain amount, H. If this distance is greater than H, the boat will tip over. Assume H is a function of the boat's width, b, length, I, and draft, h. The results of a set of experiments with a model barge with a width of 1.8 m are shown in the table. Plot these data in dimensionless form. Determine (a) D and (b) E in a power-law equation relating the dimensionless parameters: H/b = D(h/b). 1, m 2.0 4.0 2.0 4.0 2.0 4.0 h, m H, m 0.10 0.10 0.20 1.82 0.20 0.912 1.82 (b) E= i 0.912 0.35 0.521 0.35 0.521 (a) D= i 0.5668 0.9968327209213169 CG F Unstable 1 H CG Overturning couple CG

As shown in the figures below, and the Video, a rectangular barge floats in a stable configuration provided the distance between the center of gravity, CG, of the object (boat and load) and the center of buoyancy, C, is less than a certain amount, H. If this distance is greater than H, the boat will tip over. Assume H is a function of the boat's width, b, length, I, and draft, h. The results of a set of experiments with a model barge with a width of 1.8 m are shown in the table. Plot these data in dimensionless form. Determine (a) D and (b) E in a power-law equation relating the dimensionless parameters: H/b = D(h/b). 1, m 2.0 4.0 2.0 4.0 2.0 4.0 h, m H, m 0.10 0.10 0.20 1.82 0.20 0.912 1.82 (b) E= i 0.912 0.35 0.521 0.35 0.521 (a) D= i 0.5668 0.9968327209213169 CG F Unstable 1 H CG Overturning couple CG

Name: As shown in the figures below, and the Video, a rectangular barge flo
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: As shown in the figures below, and the Video, a rectangular barge floats in a stable configuration provided the distancebetween the center of gravity, CG, of the object (boat and load) and the center of buoyancy, C, is less than a certainamount, H.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A rectangular watertight box (of treasure) is 660mm long. 520mm wide and 310mm deep. It weighs 323N. A) If it floats with its sides and ends vertical in water of density 1030kg/?3 what depth of box will be submerged. B) If the box is held completely submerged in the water of density 1030kg/m2, by a vertical chain attached to the underside of the box, what is the force on the chain? Determine unknown forces by applying D'Alembert's principle to a free body diagram
1.When a double-bottom tank is full of fresh water it holds 120 tonnes.Find how many tonnes of ol of relative density 0.84 it will hold. 2. A tank measures 20 m. X 24m X 10.5 m. and contains oil of relative density 0.84.Find the mass of oll it contains when the ullage is 2.bm. (Ulage is the distance from the surface of the liquid in the tank to the top of the tank)
The bottle of champagne (specific gravity SG. mercury (specific gravity SGm = 13.6) manometer reading. Compute the net force (horizontal, FH, and vertical, Fv) on the hemispherical end cap at the bottom of the bottle (magnitude of each component and direction in which it is acting). Workout the force in symbolic fashion by defining appropriate symbols for variables and heights and then compute the numeric answer. 0.96) is under pressure as shown by the
Problem (4.9): A weight 100 kN is moved through a distance of 9 meters across the deck of pontoon of 7500 kN displacement, floating in water. This makes a pendulum 2.7 meters long, move through 0.13 m horizontally. Calculate the metacentric height of the pontoon. [Ans. 2.5 m] Solution:
A soliă, homogeneous sphere with a mass of mo, a radius of ro and a density of po is placed in a container of water. Initially the sphere floats and the water level is marked on the side of the container. What happens to the water level, when the original sphere is replaced with a new sphere which has different physical parameters? Notation: r means the water level rises in the container, f means falls, s means stays the same. Combination answers like 'f or s' are possible answers in some of the cases. v The new sphere has a radius of r = ro and a density of p Po and a mass of m = mo. The new sphere has a radius of r = ro and a mass of m < mo- Submit Answer Tries 0/12 Send Feedback Post Discussion
State Pascal’s principle and give one application of the principle. An object is dropped into a beaker of water. Two forces are operating on the object viz. the weight of object and the buoyant force FB due to the fluid. Explain, in terms of the forces when the object. a.) Sinks to the bottom of the beaker b.)Floats in the water A hydraulic press for compacting powdered samples has a large cylinder with a diameter of 10.0 cm and a small cylinder of diameter 2.0 cm. If a force of 350 N is applied to the small cylinder, what will be the force exerted by the fluid on the large cylinder? Be consistent with your units.
A 130 cc block has a piece of lead tied to it. Suppose that the SG of lead is 11.13 and SG of the block is 0.25 and it floats just submerged in the water, What is the weight of the lead? (Answer must be in grams) Water Surface Block Lead
The object shown below is stable and floating in the water. (1) Please match center of gravity cg, the center of buoyancy cb, and the metacenter mc with correct points A, B or C for Figure (b).
Consider a 16ft-long canoe (A-E) shown in Figure 3.1 with two individuals positioned at B and D. respectively. Assume that the buoyant force of the water (po) is uniformity distributed over the length of the canoe as shown below. The weight of the person at B is 200 lb. Assume that the canoe does not move and is in equilibrium. a) Determine the weight of the person at D (Reminder: The canoe is in equilibrium and perfectly horizonal). b) Determine the amplitude of po c) Using the results from parts a) and b), draw the shear and bending moment diagrams between A and E (i.e., along points A, B, C, D, and E). 30- W₁ = 200 lb 8 ft Figure 3.1 5 ft W 8 E Po 8 ft
SAMPLE PROBLEM 4 In the following set up, two spherical metals A and B are attached to the opposite sides of a wooden cylinder (SG = 0.65) which is floating on a still pond at 20 °C. Metal A is a spherical solid aluminum with SG = 2.7 and diameter of 10 cm. However, the identity of the 6 cm diameter metal B was not recorded. Calculate the specific gravity of metal B if the wooden cylinder is to remain in the horizontal position as shown. If the spherical solids are removed, determine if the wooden cylinder will be stable by solving for its metacentric height (in cm). 30 cm = 50 cm1 03
The object shown below is stable and floating in the water. (1) Please match center of gravity cg, the center of buoyancy cb, and the metacenter mc with correct points A, B or C for Figure (a).
A semicircular gate with a radius R = 7 ft is hinged along B and held by a horizontal force FA applied at A. The picture on the right shows the gate if you were looking in the direction of the arrow beneath FA. The liquid to the left of the gate has a specific weight of y-64.8 lbf/ft° and a depth of H-26 ft. Calculate the force of the liquid on the gate in Ibf. FA A Gate: side view R В