Exercise 4: iTrilogi Problems Act 4.1 There are 4 given inputs: input 1, input 2, input 3, and input 4. The outputs are comprised of output 1, output 2, and output 3 only. The 3 outputs should be off initially. If we were to press input 1, this should cause output 1 to turn on, and should be remained on after releasing input 1. Though, if any output is already on, even before pressing input 1, pressing it should have no effect whatsoever. This behavior should be similar for input 2 and output 2, as well as input 3 and output 3. For input 4, it has a special case, it is used to turn off all the outputs. The outputs should stay off when input 4 is pressed. Input 4 should be able to override all the inputs while pressed. Act 4.2 This time there are 4 inputs and 4 outputs. Each output, O(n), is activated if, and only if, at least (n) inputs are clicked or pressed. The specific combination of buttons pressed does not affect the output. For instance, clicking input 3 and input 4 should only activate output 1 and output 2.

Exercise 4: iTrilogi Problems Act 4.1 There are 4 given inputs: input 1, input 2, input 3, and input 4. The outputs are comprised of output 1, output 2, and output 3 only. The 3 outputs should be off initially. If we were to press input 1, this should cause output 1 to turn on, and should be remained on after releasing input 1. Though, if any output is already on, even before pressing input 1, pressing it should have no effect whatsoever. This behavior should be similar for input 2 and output 2, as well as input 3 and output 3. For input 4, it has a special case, it is used to turn off all the outputs. The outputs should stay off when input 4 is pressed. Input 4 should be able to override all the inputs while pressed. Act 4.2 This time there are 4 inputs and 4 outputs. Each output, O(n), is activated if, and only if, at least (n) inputs are clicked or pressed. The specific combination of buttons pressed does not affect the output. For instance, clicking input 3 and input 4 should only activate output 1 and output 2.

Database System Concepts

7th Edition

ISBN:9780078022159

Author:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Publisher:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Chapter1: Introduction

Section: Chapter Questions

Problem 1PE

See similar textbooks

Similar questions

A project currently underway at Chemical Labs, Inc requires that a substance be continued ally heated in a vat. A technician must check the substance's temperature every 15 minutes. If the substance's temperature does not exceed 102.5 degree Celsius, then the technician does nothing. However, if the temperature is greater than 102.5 degrees Celsius, the technician must turn down the vat's thermostat, wait 5 minutes, and check the temperature again. The technician repeats these step until the temperature does not exceed 102.5 degree Celsius. The director of engineering department has asked you as a programmer to writes a program that guides the technician through this process. a) Write the flow chart that can be use to write the program. b) Do a program as request from the director. The expected output should be like this: Enter the substance's temperature (in Celsius): 104.7 [Enter] The temperature is TOO HIGH. Turn the thermostat down and WAIT for 5 minutes. Then take the temperature…
Correct answer will be upvoted else Multiple Downvoted. Computer science. You should stop precisely one of these boards, at any subsequent you wish. Then, at that point, the boards adjoining it get stopped one second after the fact, the boards nearby those get stopped 2 seconds after the fact, etc. At the end of the day, in the event that you stop board x, board y (for all substantial y) would be stopped precisely |x−y| seconds after the fact. For instance, assume there are 4 boards, and the 3-rd board is stopped when the digit 9 is on it. The board 1 stops 2 seconds after the fact, so it has the digit 1; the board 2 stops 1 second after the fact, so it has the digit 0; the board 4 stops 1 second after the fact, so it has the digit 0. The subsequent 4-digit number is 1090. Note that this model isn't ideal for n=4. When all boards have been stopped, you compose the digits showed on them from left to right, to frame a n digit number (it can comprise of driving…
A project currently underway at Chemical Labs, Inc requires that a substance be continued ally heated in a vat. A technician must check the substance’s temperature every 15 minutes. If the substance’s temperature does not exceed 102.5 degree Celsius, then the technician does nothing. However, if the temperature is greater than 102.5 degrees Celsius, the technician must turn down the vat’s thermostat, wait 5 minutes, and check the temperature again. The technician repeats these step until the temperature does not exceed 102.5 degree Celsius. The director of engineering department has asked you as a programmer to writes a program that guides the technician through this process.
Abstract: the main purpose of this experiment is build real time system using PPI 8255 to control devices connected to. Problem description: assume that there are two devices are connected to port A and two sensors are connected to port B of PPI 8255. They work according to the following table Sensors (S1S2) Devices (DID2) 00 01 01 10 10 11 11 00 Write a program to control these two devices according to the values of sensors.
You have 1000 bottles of soda, and exactly one is poisoned. You have 10 test strips whichcan be used to detect poison. A single drop of poison will turn the test strip positive permanently.You can put any number of drops on a test strip at once and you can reuse a test strip as many timesas you'd like (as long as the results are negative). However, you can only run tests once per day andit takes seven days to return a result. How would you figure out the poisoned bottle in as few daysas possible?Follow up: Write code to simulate your approach
vvvHarry has a big wall clock, that got hit while he was playing. Now, the minute hand doesn't rotate by the angle 2π/3600 each second, but now it moves according to different angle x. You can assume that coordinates of the centre of the clock are (0, 0) and the length of the minute hand is l. One endpoint of the minute hand is always located at the clock centre; the other endpoint is initially located at the point (0, l). One second later, Harry observes that this endpoint is at distance d above the x-axis, i.e., the y-coordinate of this endpoint is equal to d. Harry is curious about where the minute hand will be (specifically, its y-coordinate) after t seconds. Because t can be very large, Harry can't wait for that moment. Please help him to write a python code that prints a single line containing the output.Input: 4 2 2Output4Harry has a big wall clock, that got hit while he was playing. Now, the minute hand doesn't rotate by the angle 2π/3600 each second, but now it moves according…
Three prisoners have been sentenced to long terms in prison, but due to over crowed conditions, one prisoner must be released. The warden devises a scheme to determine which prisoner is to be released. He tells the prisoners that he will blindfold them and then paint a red dot or blue dot on each forehead. After he paints the dots, he will remove the blindfolds, and a prisoner should raise his hand if he sees at least one red dot on the other two prisoners. The first prisoner to identify the color of the dot on his own forehead will be release. Of course, the prisoners agree to this. (What do they have to lose?) The warden blindfolds the prisoners, as promised, and then paints a red dot on the foreheads of all three prisoners. He removes the blindfolds and, since each prisoner sees a red dot (in fact two red dots), each prisoner raises his hand. Some time passes when one of the prisoners exclaims, "I know what color my dot is! It's red!" This prisoner is then released. Your problem…
When purifying drinking water you can use a so-called membrane filtration. In an experiment one wishes to examine the relationship between the drop across a membrane and the flux (flow per area) through the membrane. We observe the following 10 related values of pressure (x) and flux (y): pressure 2 3 4 5 6 7 8 9. 10 Pressure (x) 1.02 2.08 2.89 4.01 5.32 5.83 7.26 7.96 9.11 9.99 Flux (y) 1.15 0.85 1.56 1.72 4.32 5.07 5.00 5.31 6.17 7.04 Copy this into R to avoid typing in the data: D <- data.frame( pressure=c(1.02,2.08,2.89,4.01,5.32,5.83,7.26,7.96,9.11,9.99), flux=c(1.15,0.85,1.56,1.72,4.32,5.07,5.00,5.31,6.17,7.04)
Consider the statements below and choose the corect option T: Mathematical functions are used to draw an image in random scan system. Il: Screen points/pixels are used to draw an image in raster scan system. Both are false I is false and II is true I is true and Il is false Both are true
4.→Design·and·test·a·“sorter”.circuit.that·has·two·(2)·inputs·and.two·(2)·outputs.…It·acts·as·follows:¶ Ax OX OX 1x 1x Bx OK 1x OX 1x F18 OX OX OX 1x 28 0 OX 1x 1x 1x ¤ ¤ ¤ ¤ A B Sorter Circuit F1 F2
The Harvard robotics club has organized a Robothon. n robots are placed alongthe edge of a circular area at the middle of the OAT(open air theatre). Each robot will move along arbitrary tracksinside the circle while leaving behind a heat signature along its trail. However, they have beenprogrammed not to cross their own trail or the trail of another robot, neither will they ever moveout of the circle. In case a pair of robots i and j meet at any point, they are removed from the sceneand the club will pay a reward sum of M[i, j] to the owners of these robots. Note that some robotscan keep moving infinitely without ever meeting another one. Given the reward matrix M whereM[i, j] = M[j, i], design a polynomial time algorithm that determines the maximum money theclub might potentially end up spending. For this particular problem, give a very brief justificationof the recurrence. Give pseudo-code for a dynamic program which solves the recurrence efficiently Youdo not need to prove…
Computer science. Correct answer will be upvoted else downvoted. You have an at first void cauldron, and you need to blend an elixir in it. The elixir comprises of two fixings: enchantment pith and water. The elixir you need to blend ought to contain precisely k % sorcery substance and (100−k) % water. In one stage, you can pour possibly one liter of sorcery pith or one liter of water into the cauldron. What is the base number of steps to mix a mixture? You couldn't care less with regards to the complete volume of the elixir, just with regards to the proportion between sorcery substance and water in it. A little update: in the event that you pour e liters of embodiment and w liters of water (e+w>0) into the cauldron, then, at that point, it contains ee+w⋅100 % (without adjusting) sorcery substance and we+w⋅100 % water. Input The primary line contains the single t (1≤t≤100) — the number of experiments. The sole line of each experiment contains a solitary integer k…