What is natural convection? How does it differ from forced convection? What force causes natural convection currents?
The meaning of natural convection, the difference between the natural and forced convections and the force causing natural convection currents.
Explanation of Solution
Introduction:
There are three modes of heat transfer:
- Conduction
- Convection
- Radiation
The convection heat transfer is associated to heat transfer in fluids (liquid and gases) in which there is physical movement of fluid particles. On the basis offorce responsible for the physical movement of fluid particles, the convection is classified as natural and forced convection.
Natural Convection: The convection heat transfer process in which the bulk movement of fluid particles is observed due to density variations arising out of temperature difference is called the natural convection. The difference in temperature causes variation in different fluid layers, and this density variation facilitates movement of fluid particles without any aid of external force. There is no external force involved for the fluid motion.That is why it is referred as natural convection.
Forced Convection: When the movement of fluid particles is assisted by some external media such as fan, blower, pump, suction device, the heat transfer occurring in fluid is termed as forced convection. The forced convection results in better mixing and hence is faster and more efficient. The mild forces like buoyancy and gravity do not play any role in forced convection and the heat transfer process is dominated by the external force.
Forced convection caused by fan
The main difference between the natural and forced convection is the presence of external force. If the external force is present in heat transfer process, it is termed as forced convection, otherwise the convection heat transfer process is natural convection.
The force which play role in natural convection are buoyancy and gravity. The gravity becomes dominant in liquids which helps in producing the natural currents of heat transfer. The heated particles become less dense, they tend to move upward, and cold heavy particles move downward due to gravity, resulting in formation of natural currents. These natural currents are responsible for natural convection.
Want to see more full solutions like this?
Chapter 9 Solutions
HEAT+MASS TRANSFER:FUND.+APPL.
Additional Engineering Textbook Solutions
Degarmo's Materials And Processes In Manufacturing
Foundations of Materials Science and Engineering
Applied Statics and Strength of Materials (6th Edition)
EBK FUNDAMENTALS OF THERMODYNAMICS, ENH
Thermodynamics: An Engineering Approach
Statics and Mechanics of Materials (5th Edition)
- What are the differences between velocity boundary layer and thermal boundary layer? Discuss about both boundary layers including the characteristics, the profiles and factors affecting the boundary layers.arrow_forwardwhat is the convection heat transfer coefficient for ambient air at 43°Carrow_forwardWrite the definition ,formula and significance of Reynolds number and Grashoff number in convection heat transfer.arrow_forward
- Define the cooling of a boiled egg by forced and natural convection.arrow_forwardThe top surface of the passenger car of a train moving at a velocity of 70 km/h is 2.8 m wide and 8 m long. The top surface is absorbing solar radiation at a rate of 200 W/m?, and the temperature of the ambient air is 30°C. Assuming the roof of the car to be perfectly insulated and the radiation heat ex- change with the surroundings to be small relative to convec- tion, determine the equilibrium temperature of the top surface of the car. Answer: 35.1°C 200 W/m2 Air 30°C 70 km/harrow_forwardThe average Nusselt number in laminar natural convection from a vertical wall at 180°℃ with still air at 20°C is found to be 48. If the wall temperature becomes 30°C, all other parameters remaining same the average Nusselt number will be (a) 8 (c) 24 (b) 16 (d) 32arrow_forward
- The top surface of the passenger car of a train moving at a velocity of 70 km/h is 2.8 m wide and 8 m long. The top surface is absorbing solar radiation at a rate of 200 W/m, and the temperature of the ambient air is 30°C. Assuming the roof of the car to be perfectly insulated and the radiation heat exchange with the surroundings to be small relative to convection, determine the equilibrium temperature of the top surface of the car. Properties of air at 30°C are: The conductivity k = 0.02588 W/m. °C, The kinematic viscosity v == 1.608 x 10-5 m2/s The Prandtl number: Pr = 0.7282. 200 W/m2 Air 30°C 70 km/h The following three correlations hold for the average Nusselt number for a flow on a flat plate (according to the type of flow on this plate): 0.5 x Pr1/3 0.664RE Turbulent flow: Nu, = 0.037RE,0 x Pr/3 Mixed laminar and turbulent flow: Nu, = (0.037RE Laminar flow: Nu %3D 0.8-871) × Pr/3arrow_forwardA hot object suspended by a string is to be cooled by natural convection in fluids whose volume changes differently with temperature at constant pressure. In which fluid will the rate of cooling be lowest? With increasing temperature, a fluid whose volume(a) increases a lot (b) increases slightly(c) does not change (d) decreases slightly(e) decreases a lotarrow_forwardAn average man has abody surface area of 1.8m2 and a skin temperature of 33degrees celcius .The convection heat transfer coefficient for a clothed person walking in still air is expressed as {h,8.6V^0.53}FOR 0.5<v<2m/s,where V is the walking velocityin m/s.Assuming the average surface temperature of the clothed person to be 30degrees celcius, determine the rate of heat loss from an average man walking in still air at 10degrees celcius by convectionat a walking velocity of (a)0.5m/s (b)1.0m/s (c)1.5m/s (d)2.0m/sarrow_forward
- Consider steady, laminar, two-dimensional flow over a hot plate. Does the convective heat transfer coefficient (h) increase, decrease, or remain constant with distance from the leading edge? Explain.arrow_forwardAir at 1 atm is flowing at a velocity of 2.2 m/s across a flat plate. The film temperature between the plate and the air is 300 K. What is the Stanton number at this condition if the convection coefficient is 71.4 W/m² K?arrow_forwardIn free convection heat transfer, Nusselt number is function of A. O Grashoff number and Reynold number B. O Grashoff number and Prandti number C. O Prandtl number and Reynold number D. O Grashoff number, Prandtl number and Reynold numberarrow_forward
- Elements Of ElectromagneticsMechanical EngineeringISBN:9780190698614Author:Sadiku, Matthew N. O.Publisher:Oxford University PressMechanics of Materials (10th Edition)Mechanical EngineeringISBN:9780134319650Author:Russell C. HibbelerPublisher:PEARSONThermodynamics: An Engineering ApproachMechanical EngineeringISBN:9781259822674Author:Yunus A. Cengel Dr., Michael A. BolesPublisher:McGraw-Hill Education
- Control Systems EngineeringMechanical EngineeringISBN:9781118170519Author:Norman S. NisePublisher:WILEYMechanics of Materials (MindTap Course List)Mechanical EngineeringISBN:9781337093347Author:Barry J. Goodno, James M. GerePublisher:Cengage LearningEngineering Mechanics: StaticsMechanical EngineeringISBN:9781118807330Author:James L. Meriam, L. G. Kraige, J. N. BoltonPublisher:WILEY